[Mon Jul 1 01:59:30 2013] Detection parameters: Position = (120.0, 232.1) = 1 3 30.60 -21 57 8.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 810.3 +/- 40.8 Background counts = 98.6 Rate = 0.009 +/- 0.0005 [Mon Jul 1 01:59:31 2013] Off-axis axis estimate = 13.81' [Mon Jul 1 02:58:37 2013] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting [Mon Jul 1 02:58:37 2013] Initial guess for spatial extent in simple fitting = 13.33" [Mon Jul 1 02:58:37 2013] source mask rpix=3.1, npix_max = 50, mask sum = 64, frac = 1.259 [Mon Jul 1 02:58:37 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 13.33" [Mon Jul 1 04:44:30 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_src12.ximg exists [Mon Jul 1 04:44:30 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_src12_1.ximg exists [Mon Jul 1 04:44:30 2013] Fit fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_src12 appears to have run properly [Mon Jul 1 04:44:30 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists [Mon Jul 1 04:44:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_tfrozen_src12.csv [Mon Jul 1 04:44:30 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists [Mon Jul 1 04:44:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_tfrozen_src12.csv [Mon Jul 1 04:44:30 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0723802001_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jul 1 05:33:59 2013] Spatial fit model total counts = 5166.230000, observed total counts = 5058.000000 [Mon Jul 1 05:33:59 2013] Offset between fit and detection position for source 13 = 6.846448 pixels [Mon Jul 1 05:33:59 2013] 4913.980000 total counts/ 2026.380000 bgd. counts: snr = 64.147035 Spatial fit parameters: Offset between fit and detection position for source 13 = 6.846448 pixels Position = (115.4, 237.2) = 1 3 32.02 -21 56 45.4 Extent = 26.7 (26.4-53.3)" x 16.8 (15.6-17.7)", rotation angle = 36 (31-40) degrees Source counts = 2887.6 +/- 70.1 Background counts = 2026.4 Rate = 0.03 +/- 0.0008 [Mon Jul 1 05:33:59 2013] Vigneting correction estimate = 1.000000 [Mon Jul 1 05:33:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 1 05:33:59 2013] Assessing source extent using major axis lower bound [Mon Jul 1 05:33:59 2013] Source does appear to be extended [Mon Jul 1 05:33:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49 [Mon Jul 1 05:33:59 2013] Source is confused with source 11 [Mon Jul 1 06:27:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Jul 1 06:27:16 2013] Initial guess for spatial extent in simple fitting = 21.73" [Mon Jul 1 06:27:16 2013] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.002 [Mon Jul 1 06:27:16 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 21.73" [Mon Jul 1 11:09:36 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_src12.ximg exists [Mon Jul 1 11:09:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_src12.csv [Mon Jul 1 11:09:36 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_src12_1.ximg exists [Mon Jul 1 11:09:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_src12.csv [Mon Jul 1 11:09:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jul 1 11:09:37 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Mon Jul 1 11:09:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_tfrozen_src12.csv [Mon Jul 1 11:09:37 2013] fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Mon Jul 1 11:09:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_tfrozen_src12.csv [Mon Jul 1 11:09:37 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0723802001_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jul 1 11:57:47 2013] Warning, spatial fit 12 centroid is now closest to src. 8 [Mon Jul 1 11:57:47 2013] Source 13 is offset by 0.303287 and -9.655609 pixels which is larger than 2 X fitted extent = 2.898855 x 2.898855, not incorporating fit results [Mon Jul 1 11:57:47 2013] Spatial fit model total counts = 5122.890000, observed total counts = 5125.000000 [Mon Jul 1 11:57:47 2013] Offset between fit and detection position for source 13 = 1.538781 pixels [Mon Jul 1 11:57:47 2013] Warning, changing simple spatial fit ID from 12 to 15 [Mon Jul 1 11:57:47 2013] 5160.030000 total counts/ 1567.390000 bgd. counts: snr = 90.745514 Spatial fit parameters: Offset between fit and detection position for source 13 = 1.538781 pixels Position = (116.6, 238.2) = 1 3 31.65 -21 56 41.1 Extent = 26.3 (26.2-52.6)" x 20.2 (18.5-21.3)", rotation angle = 46 (40-53) degrees Source counts = 3592.6 +/- 71.8 Background counts = 1567.4 Rate = 0.04 +/- 0.0009 [Mon Jul 1 11:57:47 2013] Vigneting correction estimate = 1.000000 [Mon Jul 1 11:57:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jul 1 11:57:47 2013] Assessing source extent using major axis lower bound [Mon Jul 1 11:57:47 2013] Source does appear to be extended [Mon Jul 1 11:57:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23 [Mon Jul 1 13:54:02 2013] Counts = 3592.640000, rescaling region sizes by 2.000000 [Mon Jul 1 13:54:02 2013] XMMSAS src. selection expression = ellipse(10095.852000, 20675.682000, 3155.556091, 2422.308070, 46.102100, X, Y) [Mon Jul 1 13:54:02 2013] Writing source region out to fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13_src.reg [Mon Jul 1 13:54:02 2013] Extracting stamp from image fullrun_mos1_xmm0723802001_pi300-10000_cl_sm2.00.img.gz, (0, 57) - (298, 420) [Mon Jul 1 13:54:02 2013] XMMSAS bgd. selection expression = annulus(10095.852000, 20675.682000, 10518.520303, 21037.040605, X, Y) && !ellipse(24071.686800, 25321.186400, 4934.544142, 4225.392122, 83.999980, X, Y) && !ellipse(21841.886000, 23871.030000, 1284.424037, 1284.424037, 0.000000, X, Y) && !ellipse(23112.937900, 37490.679600, 605.473617, 338.204010, 3.142641, X, Y) && !ellipse(9526.620000, 20938.082000, 4080.168117, 1334.912038, 35.727300, X, Y) && !ellipse(23057.444000, 23373.442000, 873.768025, 873.768025, 0.000000, X, Y) && !ellipse(24241.532013, 22894.348907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8362.551834, 21955.327438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11289.098000, 19798.392000, 2103.704061, 1811.480052, 11.503200, X, Y) && !ellipse(7734.486000, 22277.268000, 2228.184064, 1439.448041, 223.874000, X, Y) && !ellipse(9230.672000, 21154.548000, 2204.464063, 1875.704054, 41.157800, X, Y) && !ellipse(22266.323200, 27753.767000, 299.299209, 299.299209, 0.000000, X, Y) && !ellipse(11520.904000, 19560.594000, 2663.808077, 2663.808077, 0.000000, X, Y) && !ellipse(11177.768000, 19891.788000, 4045.768116, 2539.456073, 29.329000, X, Y) && !ellipse(21753.056000, 25588.126000, 1340.648039, 1340.648039, 0.000000, X, Y) && !ellipse(18092.029400, 30367.284200, 351.437610, 351.437610, 0.000000, X, Y) && !ellipse(23844.154000, 27081.632000, 1182.576034, 1182.576034, 0.000000, X, Y) && !ellipse(25026.292297, 23019.220245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20793.501600, 23838.178400, 356.344010, 356.344010, 0.000000, X, Y) && !ellipse(22285.133850, 27277.706696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.254150, 24580.664215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22545.298400, 29136.962400, 323.014409, 323.014409, 0.000000, X, Y) && !ellipse(20346.769800, 27163.800200, 403.463212, 229.581607, 0.389793, X, Y) && !ellipse(21634.067566, 26744.016602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.558000, 26128.950000, 1064.487204, 1064.487204, 0.000000, X, Y) && !ellipse(24564.468536, 28119.863403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22700.173340, 22846.168091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10753.553070, 33632.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22409.108000, 22384.292400, 1139.944033, 1139.944033, 0.000000, X, Y) && !ellipse(23506.608000, 27973.282000, 1288.400037, 1288.400037, 0.000000, X, Y) && !ellipse(23108.226000, 28942.052000, 1258.912036, 1258.912036, 0.000000, X, Y) && !ellipse(7859.284393, 26390.287048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7631.971405, 24087.800507, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jul 1 13:54:02 2013] Writing fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13.gif [Mon Jul 1 14:15:06 2013] Mean detx,y = (11505.89, 8784.74) [Mon Jul 1 14:15:08 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jul 1 14:18:20 2013] Binned source spectrum to 10 counts/bin [Mon Jul 1 14:18:20 2013] Setting source spectrum file to fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Mon Jul 1 14:18:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13_bgd.pi.gz [Mon Jul 1 20:44:42 2013] Updating aperture counts using extracted products [Mon Jul 1 20:44:42 2013] Total counts from fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 18670.00 [Mon Jul 1 20:44:42 2013] Total counts from fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13_bgd.pi.gz = 161139.00 [Mon Jul 1 20:44:42 2013] Got source and background scale factors 16877600.000000, 219170307.000000 [Mon Jul 1 20:44:42 2013] User source parameters: Position = (116.6, 238.2) = 1 3 31.65 -21 56 41.1 Extent = 26.3 (26.2-52.6)" x 20.2 (18.5-21.3)", rotation angle = 46 (40-53) degrees Source aperture counts = 6261.2 +/- 137.6 Background aperture counts = 12408.8 Rate = 0.08 +/- 0.002 [Mon Jul 1 20:44:45 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jul 1 20:44:45 2013] Using photon index=1.80, rate=0.0432, arf fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13.arf [Mon Jul 1 20:44:45 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jul 1 20:44:45 2013] Updating source flux to 7.7e-13 [Mon Jul 1 20:44:50 2013] Flag b found in src. 13 procflags, skipping spectral fitting [Mon Jul 1 20:44:50 2013] Flag c found in src. 13 procflags, skipping spectral fitting [Mon Jul 1 20:45:05 2013] xmm0723802001/analysis//spectral/fullrun_mos1_xmm0723802001_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete