[Fri Jun 21 02:00:48 2013] Detection parameters:
  Position = (333.4, 291.8) = 23 25 13.18 -12 7 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1763.5 +/- 61.7
  Background counts = 689.3
  Rate = 0.03 +/- 0.001

[Fri Jun 21 02:00:50 2013] Off-axis axis estimate = 2.58'
[Fri Jun 21 02:10:25 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 02:10:25 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Fri Jun 21 02:10:25 2013] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.628
[Fri Jun 21 02:10:25 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 7.72"
[Fri Jun 21 06:59:45 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun 21 06:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src33.csv
[Fri Jun 21 06:59:45 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun 21 06:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src33.csv
[Fri Jun 21 06:59:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 06:59:46 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun 21 06:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 21 06:59:46 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun 21 06:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 21 06:59:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 09:29:05 2013] Source 40 is offset by 7.489529 and -0.583618 pixels which is larger than
2 X fitted extent = 3.511375 x 7.097104, not incorporating fit results
[Fri Jun 21 09:29:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 09:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 09:29:05 2013] Assessing source extent using major
[Fri Jun 21 09:29:05 2013] Source does appear to be extended
[Fri Jun 21 09:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 09:29:05 2013] Source is confused with source 42
[Fri Jun 21 09:29:23 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 09:29:23 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Fri Jun 21 09:29:23 2013] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.628
[Fri Jun 21 09:29:23 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 7.72"
[Fri Jun 21 16:01:59 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src31.ximg exists
[Fri Jun 21 16:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src31.csv
[Fri Jun 21 16:01:59 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Jun 21 16:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src31.csv
[Fri Jun 21 16:01:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 16:02:00 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Jun 21 16:02:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 21 16:02:00 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Jun 21 16:02:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Jun 21 16:02:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:53:10 2013] Source 40 is offset by -6.704678 and 3.739499 pixels which is larger than
2 X fitted extent = 4.914621 x 4.914621, not incorporating fit results
[Fri Jun 21 17:53:10 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 12.971553 pixels away
[Fri Jun 21 17:53:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 17:53:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 17:53:10 2013] Assessing source extent using major
[Fri Jun 21 17:53:10 2013] Source does appear to be extended
[Fri Jun 21 17:53:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 17:53:26 2013] Counts = 1763.464722, rescaling region sizes by 2.000000
[Fri Jun 21 17:53:26 2013] XMMSAS src. selection expression = ellipse(28956.641022, 25341.258423, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 21 17:53:26 2013] Writing source region out to fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src40_src.reg
[Fri Jun 21 17:53:26 2013] Extracting stamp from image fullrun_pn_xmm0723801701_pi300-10000_cl_sm2.00.img.gz, (258, 217) - (408, 367)
[Fri Jun 21 17:53:26 2013] XMMSAS bgd. selection expression = annulus(28956.641022, 25341.258423, 4350.000000, 8700.000000, X, Y) && !ellipse(27241.887695, 25163.769714, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26611.785522, 25455.307861, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(34183.644989, 28134.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37292.984314, 16229.143448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31654.018036, 31604.711487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29064.708679, 29936.235321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31167.998993, 34569.938477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22747.254974, 34671.188019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36765.817627, 34616.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.266600, 30682.879000, 381.642411, 381.642411, 0.000000, X, Y) && !ellipse(27617.513275, 29798.120697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.031555, 29346.011688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23846.952000, 29823.136000, 1277.096037, 1277.096037, 0.000000, X, Y) && !ellipse(28794.129333, 29072.068420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.054932, 28824.648895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.279720, 29290.325600, 403.934412, 363.868810, 26.403400, X, Y) && !ellipse(28622.866669, 28462.277222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25070.344543, 27959.741241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24552.133270, 27866.215179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19755.919754, 28196.766327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29854.340942, 26906.950439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24550.654000, 26777.052000, 1174.312034, 1174.312034, 0.000000, X, Y) && !ellipse(37714.441010, 25076.469696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28801.220917, 24815.265259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.937317, 24168.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30664.274800, 24108.186400, 1369.136039, 304.900009, 110.582000, X, Y) && !ellipse(24335.111176, 23338.386627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.539093, 23013.716370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28504.646179, 24391.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25031.594000, 23087.152000, 703.772020, 703.772020, 0.000000, X, Y) && !ellipse(24610.296997, 22582.616608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26723.341888, 22220.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27099.827698, 21621.138901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.789600, 21461.250600, 366.733611, 366.733611, 0.000000, X, Y) && !ellipse(26395.111237, 21271.897675, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 17:53:26 2013] Writing fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src40.gif
[Fri Jun 21 19:13:47 2013] Mean detx,y = (-3513.48, 2002.37) 
[Fri Jun 21 19:13:53 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:16:41 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:16:41 2013] Setting source spectrum file to fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Jun 21 19:16:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src40_bgd.pi.gz