[Fri Jun 21 02:00:46 2013] Detection parameters:
  Position = (306.4, 293.1) = 23 25 21.17 -12 7 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28402.2 +/- 206.4
  Background counts = 696.5
  Rate = 0.4 +/- 0.003

[Fri Jun 21 02:00:50 2013] Off-axis axis estimate = 0.70'
[Fri Jun 21 02:10:25 2013] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 02:10:25 2013] Initial guess for spatial extent in simple fitting = 6.78"
[Fri Jun 21 02:10:25 2013] source mask rpix=1.6, npix_max = 16, mask sum = 15, frac = 0.886
[Fri Jun 21 02:10:25 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 6.78"
[Fri Jun 21 06:59:44 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 21 06:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 06:59:44 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 21 06:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 06:59:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 06:59:45 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 21 06:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 06:59:45 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 21 06:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 06:59:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 09:29:05 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Fri Jun 21 09:29:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 09:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 09:29:05 2013] Assessing source extent using major
[Fri Jun 21 09:29:05 2013] Source does appear to be extended
[Fri Jun 21 09:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 09:29:23 2013] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 09:29:23 2013] Initial guess for spatial extent in simple fitting = 6.78"
[Fri Jun 21 09:29:23 2013] source mask rpix=1.6, npix_max = 16, mask sum = 15, frac = 0.886
[Fri Jun 21 09:29:23 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 6.78"
[Fri Jun 21 16:01:58 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 21 16:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 16:01:58 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 21 16:01:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 16:01:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 16:01:59 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 21 16:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 16:01:59 2013] fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 21 16:01:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 16:01:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:53:09 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Fri Jun 21 17:53:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 17:53:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 17:53:10 2013] Assessing source extent using major
[Fri Jun 21 17:53:10 2013] Source does appear to be extended
[Fri Jun 21 17:53:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 17:53:25 2013] Counts = 28402.183594, rescaling region sizes by 3.000000
[Fri Jun 21 17:53:25 2013] XMMSAS src. selection expression = ellipse(26611.785522, 25455.307861, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Jun 21 17:53:25 2013] Writing source region out to fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 21 17:53:25 2013] Extracting stamp from image fullrun_pn_xmm0723801701_pi300-10000_cl_sm2.00.img.gz, (194, 181) - (419, 406)
[Fri Jun 21 17:53:25 2013] XMMSAS bgd. selection expression = annulus(26611.785522, 25455.307861, 9787.500000, 19575.000000, X, Y) && !ellipse(27241.887695, 25163.769714, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(34183.644989, 28134.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.353546, 11996.912582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37292.984314, 16229.143448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.814056, 13546.177933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25387.586029, 12405.760544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31654.018036, 31604.711487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29064.708679, 29936.235321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10047.806458, 20673.663818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31167.998993, 34569.938477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24110.139923, 39956.653076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23546.571000, 38241.106800, 343.634410, 343.634410, 0.000000, X, Y) && !ellipse(22647.271881, 37181.972229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32492.917023, 36792.938751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32485.416565, 6547.155640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32517.343292, 35497.178253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17331.887299, 35377.210754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31585.491730, 35099.292908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22747.254974, 34671.188019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36765.817627, 34616.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17082.957062, 31024.136230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.266600, 30682.879000, 381.642411, 381.642411, 0.000000, X, Y) && !ellipse(27617.513275, 29798.120697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17507.898483, 29712.875671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28062.031555, 29346.011688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14477.721512, 29552.121613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23846.952000, 29823.136000, 1277.096037, 1277.096037, 0.000000, X, Y) && !ellipse(28794.129333, 29072.068420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.054932, 28824.648895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.279720, 29290.325600, 403.934412, 363.868810, 26.403400, X, Y) && !ellipse(28622.866669, 28462.277222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25070.344543, 27959.741241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24552.133270, 27866.215179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19755.919754, 28196.766327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29854.340942, 26906.950439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24550.654000, 26777.052000, 1174.312034, 1174.312034, 0.000000, X, Y) && !ellipse(28956.641022, 25341.258423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37714.441010, 25076.469696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28801.220917, 24815.265259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35623.937317, 24168.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26606.278000, 8930.210000, 1592.888046, 431.003212, 332.412433, X, Y) && !ellipse(30664.274800, 24108.186400, 1369.136039, 304.900009, 110.582000, X, Y) && !ellipse(24335.111176, 23338.386627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.539093, 23013.716370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16246.920197, 22748.277161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28504.646179, 24391.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25031.594000, 23087.152000, 703.772020, 703.772020, 0.000000, X, Y) && !ellipse(24610.296997, 22582.616608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26723.341888, 22220.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27099.827698, 21621.138901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.789600, 21461.250600, 366.733611, 366.733611, 0.000000, X, Y) && !ellipse(26395.111237, 21271.897675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16478.791160, 20933.522000, 479.336814, 479.336814, 0.000000, X, Y) && !ellipse(18104.616318, 20366.885803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.639160, 15337.019089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25096.030400, 15151.772400, 544.615216, 295.560009, 352.139078, X, Y) && !ellipse(17976.625320, 14929.457489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32156.617737, 14652.433060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30618.275177, 6674.123787, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 17:53:25 2013] Writing fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src2.gif
[Fri Jun 21 18:07:41 2013] Mean detx,y = (-2288.38, 1300.62) 
[Fri Jun 21 18:07:49 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 18:20:42 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 18:20:43 2013] Setting source spectrum file to fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 21 18:20:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0723801701_pi300-10000_pass1_cl_src2_bgd.pi.gz