[Fri Jun 21 02:01:21 2013] Detection parameters:
  Position = (337.7, 312.8) = 23 25 11.89 -12 5 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.8 +/- 32.5
  Background counts = 368.8
  Rate = 0.002 +/- 0.0004

[Fri Jun 21 02:01:23 2013] Off-axis axis estimate = 3.03'
[Fri Jun 21 06:59:46 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 06:59:46 2013] Initial guess for spatial extent in simple fitting = 7.95"
[Fri Jun 21 06:59:46 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Fri Jun 21 06:59:46 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 7.95"
[Fri Jun 21 09:28:53 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun 21 09:28:53 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun 21 09:28:53 2013] Fit fullrun_mos1_xmm0723801701_pi300-10000_cl_pass0_src27 appears to have run properly
[Fri Jun 21 09:28:54 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun 21 09:28:54 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun 21 09:28:54 2013] Fit fullrun_mos1_xmm0723801701_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Jun 21 09:29:13 2013] Spatial fit model total counts = 4102.820000, observed total counts = 4104.000000
[Fri Jun 21 09:29:13 2013] Offset between fit and detection position for source 13 = 8.158579 pixels
[Fri Jun 21 09:29:13 2013] 3980.609000 total counts/ 3591.740000 bgd. counts: snr = 6.488598
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 8.158579 pixels
  Position = (330.7, 308.7) = 23 25 13.98 -12 6 8.2
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 388.9 +/- 63.1
  Background counts = 3591.7
  Rate = 0.004 +/- 0.0006
[Fri Jun 21 09:29:13 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 09:29:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 09:29:13 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 09:29:13 2013] Source does appear to be extended
[Fri Jun 21 09:29:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 16:02:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 16:02:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 16:02:00 2013] Initial guess for spatial extent in simple fitting = 15.89"
[Fri Jun 21 16:02:00 2013] source mask rpix=3.7, npix_max = 68, mask sum = 64, frac = 0.928
[Fri Jun 21 16:02:00 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 15.89"
[Fri Jun 21 17:52:58 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jun 21 17:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_src27.csv
[Fri Jun 21 17:52:58 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jun 21 17:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_src27.csv
[Fri Jun 21 17:52:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:52:58 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jun 21 17:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jun 21 17:52:58 2013] fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jun 21 17:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jun 21 17:52:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801701_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:53:16 2013] Warning, spatial fit 27 centroid is now closest to src. 8
[Fri Jun 21 17:53:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 17:53:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 17:53:16 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 17:53:16 2013] Source does appear to be extended
[Fri Jun 21 17:53:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 19:23:33 2013] XMMSAS src. selection expression = ellipse(28721.828000, 26810.732000, 953.508027, 953.508027, 0.000000, X, Y)
[Fri Jun 21 19:23:33 2013] Writing source region out to fullrun_mos1_xmm0723801701_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun 21 19:23:33 2013] Extracting stamp from image fullrun_mos1_xmm0723801701_pi300-10000_cl_sm2.00.img.gz, (276, 254) - (385, 364)
[Fri Jun 21 19:23:33 2013] XMMSAS bgd. selection expression = annulus(28721.828000, 26810.732000, 1589.180046, 3178.360091, X, Y) && !ellipse(27087.646000, 25223.811400, 5151.576148, 4323.312124, 309.151500, X, Y) && !ellipse(26203.580000, 22848.662000, 1279.280037, 759.717622, 358.774810, X, Y) && !ellipse(24827.700000, 25733.976000, 1133.376033, 1133.376033, 0.000000, X, Y)
[Fri Jun 21 19:23:33 2013] Writing fullrun_mos1_xmm0723801701_pi300-10000_pass1_cl_src13.gif
[Fri Jun 21 19:46:10 2013] Mean detx,y = (-3189.75, -3448.50) 
[Fri Jun 21 19:46:11 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:46:25 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:46:25 2013] Setting source spectrum file to fullrun_mos1_xmm0723801701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 21 19:46:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0723801701_pi300-10000_pass1_cl_src13_bgd.pi.gz