[Sat Jul  6 02:26:29 2013] Detection parameters:
  Position = (256.5, 318.4) = 1 2 47.98 -21 50 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1984.4 +/- 69.6
  Background counts = 779.8
  Rate = 0.04 +/- 0.001

[Sat Jul  6 02:26:30 2013] Off-axis axis estimate = 3.37'
[Sat Jul  6 02:31:08 2013] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sat Jul  6 02:31:08 2013] Initial guess for spatial extent in simple fitting = 8.11"
[Sat Jul  6 02:31:08 2013] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.626
[Sat Jul  6 02:31:08 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.11"
[Sat Jul  6 03:56:31 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jul  6 03:56:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_src4.csv
[Sat Jul  6 03:56:31 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jul  6 03:56:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_src4.csv
[Sat Jul  6 03:56:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 03:56:32 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jul  6 03:56:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jul  6 03:56:32 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jul  6 03:56:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jul  6 03:56:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 07:15:43 2013] Spatial fit model total counts = 13295.900000, observed total counts = 9424.000000
[Sat Jul  6 07:15:43 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul  6 07:15:43 2013] Vigneting correction estimate = 1.000000
[Sat Jul  6 07:15:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  6 07:15:43 2013] Assessing source extent using major
[Sat Jul  6 07:15:43 2013] Source does appear to be extended
[Sat Jul  6 07:15:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  6 07:16:04 2013] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sat Jul  6 07:16:04 2013] Initial guess for spatial extent in simple fitting = 8.11"
[Sat Jul  6 07:16:04 2013] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.626
[Sat Jul  6 07:16:04 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.11"
[Sat Jul  6 08:45:45 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jul  6 08:45:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_src4.csv
[Sat Jul  6 08:45:45 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jul  6 08:45:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_src4.csv
[Sat Jul  6 08:45:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 08:45:45 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jul  6 08:45:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jul  6 08:45:45 2013] fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jul  6 08:45:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jul  6 08:45:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  6 12:58:28 2013] Spatial fit model total counts = 13283.400000, observed total counts = 9424.000000
[Sat Jul  6 12:58:28 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul  6 12:58:28 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 24.323318 pixels away
[Sat Jul  6 12:58:28 2013] Source 4 is offset by 1.740095 and 3.711629 pixels which is larger than
2 X fitted extent = 1.184460 x 1.184460, not incorporating fit results
[Sat Jul  6 12:58:28 2013] Vigneting correction estimate = 1.000000
[Sat Jul  6 12:58:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  6 12:58:28 2013] Assessing source extent using major
[Sat Jul  6 12:58:28 2013] Source does appear to be extended
[Sat Jul  6 12:58:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  6 12:58:47 2013] Counts = 1984.389038, rescaling region sizes by 2.000000
[Sat Jul  6 12:58:47 2013] XMMSAS src. selection expression = ellipse(22268.452301, 27649.203705, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul  6 12:58:47 2013] Writing source region out to fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4_src.reg
[Sat Jul  6 12:58:47 2013] Extracting stamp from image fullrun_pn_xmm0723801301_pi300-10000_cl_sm2.00.img.gz, (182, 243) - (332, 393)
[Sat Jul  6 12:58:47 2013] XMMSAS bgd. selection expression = annulus(22268.452301, 27649.203705, 4350.000000, 8700.000000, X, Y) && !ellipse(24076.337400, 25262.431400, 5399.472155, 4785.240138, 78.367400, X, Y) && !ellipse(24113.522430, 36380.448090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22613.088379, 24579.116333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26927.210968, 22825.304871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23483.391052, 24018.759125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17901.604813, 20381.493774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19677.879150, 18114.317795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.002655, 24704.298309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.209400, 35566.049400, 522.560015, 263.812808, 354.407570, X, Y) && !ellipse(27833.559600, 34762.789000, 430.546412, 430.546412, 0.000000, X, Y) && !ellipse(22410.148560, 30782.377228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27405.322200, 30723.309400, 570.525616, 570.525616, 0.000000, X, Y) && !ellipse(18071.605011, 30351.378357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.452400, 29927.769800, 591.908817, 234.844007, 18.340073, X, Y) && !ellipse(22553.127197, 29461.170929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25863.946075, 28466.246490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21829.363556, 28494.395111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24603.448000, 27548.992000, 1064.368031, 1064.368031, 0.000000, X, Y) && !ellipse(25987.808502, 27785.300507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21461.087097, 27921.333588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18260.418747, 27623.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20827.550644, 27506.392334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20356.337372, 27155.166473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27428.355713, 26555.655548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21826.035477, 25150.088348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21040.979156, 25099.151611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.229675, 25122.632690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21157.104828, 24580.454468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20789.368000, 23801.532200, 421.084012, 421.084012, 0.000000, X, Y) && !ellipse(21692.807434, 23796.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26167.978790, 23755.483765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25828.042114, 23353.777832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21784.464355, 23298.250549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24736.413544, 22940.517212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23326.390000, 22511.516000, 1323.864038, 1323.864038, 0.000000, X, Y) && !ellipse(27149.439000, 19512.100000, 1435.336041, 1435.336041, 0.000000, X, Y) && !ellipse(18956.096161, 20142.286255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.794000, 18122.618000, 1558.784045, 477.324814, 325.530790, X, Y)
[Sat Jul  6 12:58:47 2013] Writing fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4.gif
[Sat Jul  6 13:08:29 2013] Mean detx,y = (2572.76, 812.15) 
[Sat Jul  6 13:08:33 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  6 13:10:12 2013] Binned source spectrum to 10 counts/bin
[Sat Jul  6 13:10:12 2013] Setting source spectrum file to fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul  6 13:10:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jul  6 13:51:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul  6 13:51:00 2013] rmf not generated due to insufficient counts
[Mon Jul  8 09:53:37 2013] Updating aperture counts using extracted products
[Mon Jul  8 09:53:37 2013] Total counts from fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 30260.00
[Mon Jul  8 09:53:37 2013] Total counts from fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 109001.00
[Mon Jul  8 09:53:37 2013] Got source and background scale factors 4297405.000000, 115890118.000000
[Mon Jul  8 09:53:37 2013] User source parameters:
  Position = (256.5, 318.4) = 1 2 47.98 -21 50 46.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 26218.1 +/- 175.0
  Background aperture counts = 4041.9
  Rate = 0.4 +/- 0.002

[Mon Jul  8 09:53:37 2013] Updating counts from extracted products
[Mon Jul  8 09:53:37 2013] Set source signif. to 26218.06/63.58 = 412.39
[Mon Jul  8 09:53:47 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  8 09:53:47 2013] Using photon index=1.80, rate=0.353, arf fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4.arf
[Mon Jul  8 09:53:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  8 09:53:47 2013] Updating source flux to 9.8e-13
[Mon Jul  8 09:54:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  8 09:54:20 2013] xmm0723801301/analysis//spectral/fullrun_pn_xmm0723801301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete