[Fri Jun 14 16:12:21 2013] Detection parameters:
  Position = (296.4, 255.0) = 23 57 3.96 -34 48 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 781.7 +/- 45.7
  Background counts = 880.6
  Rate = 0.02 +/- 0.001

[Fri Jun 14 16:12:22 2013] Off-axis axis estimate = 3.15'
[Fri Jun 14 16:18:57 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 16:18:57 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jun 14 16:18:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.776
[Fri Jun 14 16:18:57 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 8.00"
[Fri Jun 14 22:38:44 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src52.ximg exists
[Fri Jun 14 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src52.csv
[Fri Jun 14 22:38:44 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri Jun 14 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src52.csv
[Fri Jun 14 22:38:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:38:46 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri Jun 14 22:38:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri Jun 14 22:38:46 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Jun 14 22:38:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri Jun 14 22:38:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:24 2013] Warning, spatial fit 52 centroid is now closest to src. 6
[Sat Jun 15 03:54:24 2013] Source 54 is offset by -0.927565 and -2.539700 pixels which is larger than
2 X fitted extent = 0.961595 x 0.961595, not incorporating fit results
[Sat Jun 15 03:54:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:24 2013] Assessing source extent using major
[Sat Jun 15 03:54:24 2013] Source does appear to be extended
[Sat Jun 15 03:54:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:58 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:58 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Sat Jun 15 03:54:58 2013] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.776
[Sat Jun 15 03:54:58 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 8.00"
[Sun Jun 16 01:10:52 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src39.ximg exists
[Sun Jun 16 01:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src39.csv
[Sun Jun 16 01:10:52 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src39_1.ximg exists
[Sun Jun 16 01:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src39.csv
[Sun Jun 16 01:10:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:10:53 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sun Jun 16 01:10:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun Jun 16 01:10:54 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sun Jun 16 01:10:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun Jun 16 01:10:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:18:18 2013] Source 54 is offset by 1.007136 and -4.660574 pixels which is larger than
2 X fitted extent = 0.919949 x 0.919949, not incorporating fit results
[Sun Jun 16 05:18:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:18:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:18:18 2013] Assessing source extent using major
[Sun Jun 16 05:18:18 2013] Source does appear to be extended
[Sun Jun 16 05:18:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 05:18:55 2013] XMMSAS src. selection expression = ellipse(25740.797852, 22139.524078, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 05:18:55 2013] Writing source region out to fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54_src.reg
[Sun Jun 16 05:18:55 2013] Extracting stamp from image fullrun_pn_xmm0723801001_pi300-10000_cl_sm2.00.img.gz, (259, 218) - (334, 293)
[Sun Jun 16 05:18:56 2013] XMMSAS bgd. selection expression = annulus(25740.797852, 22139.524078, 1087.500000, 2175.000000, X, Y) && !ellipse(26541.125600, 25653.556000, 6440.064185, 6440.064185, 0.000000, X, Y) && !ellipse(27170.979828, 25059.450958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23915.101471, 23943.252747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26512.962677, 21853.706192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28489.482000, 24110.118000, 1291.888037, 643.935219, 249.497000, X, Y) && !ellipse(28100.017059, 23776.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27919.382000, 23257.358000, 514.929615, 514.929615, 0.000000, X, Y) && !ellipse(22977.828000, 22597.842000, 1275.344037, 1275.344037, 0.000000, X, Y) && !ellipse(28313.250000, 23070.026000, 1031.440030, 1031.440030, 0.000000, X, Y) && !ellipse(24194.824000, 23467.176000, 2550.688073, 2550.688073, 0.000000, X, Y) && !ellipse(27050.067139, 22557.340729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25320.647430, 21615.692108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24968.672852, 21267.227478, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 05:18:56 2013] Writing fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54.gif
[Sun Jun 16 06:42:16 2013] Mean detx,y = (-3333.09, -1635.03) 
[Sun Jun 16 06:42:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 06:42:54 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 06:42:55 2013] Setting source spectrum file to fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sun Jun 16 06:42:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sun Jun 16 08:16:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 08:16:37 2013] rmf not generated due to insufficient counts
[Sun Jun 16 11:51:23 2013] Updating aperture counts using extracted products
[Sun Jun 16 11:51:23 2013] Total counts from fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 5731.00
[Sun Jun 16 11:51:23 2013] Total counts from fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54_bgd.pi.gz = 0.00
[Sun Jun 16 11:51:23 2013] Got source and background scale factors 891338.000000, 0.000000
[Sun Jun 16 11:51:23 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun 16 11:51:32 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 11:51:32 2013] Using photon index=1.80, rate=0.0164, arf fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54.arf
[Sun Jun 16 11:51:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 11:51:32 2013] Updating source flux to 6.3e-14
[Sun Jun 16 11:52:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 11:52:57 2013] xmm0723801001/analysis//spectral/fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete