[Fri Jun 14 16:12:21 2013] Detection parameters:
  Position = (283.5, 267.0) = 23 57 8.53 -34 47 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 783.4 +/- 50.6
  Background counts = 1048.2
  Rate = 0.01 +/- 0.0008

[Fri Jun 14 16:12:22 2013] Off-axis axis estimate = 2.53'
[Fri Jun 14 16:18:57 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 16:18:57 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jun 14 16:18:57 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Fri Jun 14 16:18:57 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 7.69"
[Fri Jun 14 22:38:44 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src48.ximg exists
[Fri Jun 14 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src48.csv
[Fri Jun 14 22:38:44 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri Jun 14 22:38:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src48.csv
[Fri Jun 14 22:38:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 22:38:46 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri Jun 14 22:38:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri Jun 14 22:38:46 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Jun 14 22:38:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri Jun 14 22:38:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:24 2013] Source 50 is offset by 2.087917 and -3.476777 pixels which is larger than
2 X fitted extent = 0.884041 x 0.884041, not incorporating fit results
[Sat Jun 15 03:54:24 2013] Source 50 is offset by -4.346267 and -8.121535 pixels which is larger than
2 X fitted extent = 2.833485 x 5.085196, not incorporating fit results
[Sat Jun 15 03:54:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:24 2013] Assessing source extent using major
[Sat Jun 15 03:54:24 2013] Source does appear to be extended
[Sat Jun 15 03:54:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:58 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:58 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Sat Jun 15 03:54:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Sat Jun 15 03:54:58 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.69"
[Sun Jun 16 01:10:52 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src35.ximg exists
[Sun Jun 16 01:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src35.csv
[Sun Jun 16 01:10:52 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Jun 16 01:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src35.csv
[Sun Jun 16 01:10:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 01:10:53 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Jun 16 01:10:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 16 01:10:53 2013] fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Jun 16 01:10:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 16 01:10:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:18:18 2013] Spatial fit model total counts = 15406.000000, observed total counts = 15359.000000
[Sun Jun 16 05:18:18 2013] Offset between fit and detection position for source 50 = 5.868925 pixels
[Sun Jun 16 05:18:18 2013] Warning, changing simple spatial fit ID from 35 to 33
[Sun Jun 16 05:18:18 2013] 15626.920000 total counts/ 14425.300000 bgd. counts: snr = 10.004715
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 5.868925 pixels
  Position = (278.7, 270.3) = 23 57 10.23 -34 47 25.2
  Extent = 31.9 (31.9-63.8)", rotation angle = 0
  Source counts = 1201.6 +/- 125.0
  Background counts = 14425.3
  Rate = 0.01 +/- 0.001
[Sun Jun 16 05:18:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:18:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:18:18 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 05:18:18 2013] Source does appear to be extended
[Sun Jun 16 05:18:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 05:18:18 2013] Source is confused with source 3
[Sun Jun 16 05:18:55 2013] Counts = 1201.620000, rescaling region sizes by 2.000000
[Sun Jun 16 05:18:55 2013] XMMSAS src. selection expression = ellipse(24194.824000, 23467.176000, 3826.032110, 3826.032110, 0.000000, X, Y)
[Sun Jun 16 05:18:55 2013] Writing source region out to fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50_src.reg
[Sun Jun 16 05:18:55 2013] Extracting stamp from image fullrun_pn_xmm0723801001_pi300-10000_cl_sm2.00.img.gz, (59, 50) - (499, 490)
[Sun Jun 16 05:18:55 2013] XMMSAS bgd. selection expression = annulus(24194.824000, 23467.176000, 12753.440367, 25506.880734, X, Y) && !ellipse(26541.125600, 25653.556000, 6440.064185, 6440.064185, 0.000000, X, Y) && !ellipse(27170.979828, 25059.450958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23915.101471, 23943.252747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29433.771027, 25668.302277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37514.958038, 30410.973145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26512.962677, 21853.706192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.426800, 21453.219200, 426.447212, 376.142411, 37.211100, X, Y) && !ellipse(34615.772247, 35107.706696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31412.413025, 36028.561127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16816.863388, 33783.571899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30099.856812, 33101.314331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30600.790600, 31485.722400, 605.067217, 369.081611, 51.653832, X, Y) && !ellipse(26595.722595, 31340.127197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26644.786020, 30851.204800, 1349.160039, 581.470417, 255.715000, X, Y) && !ellipse(20155.458920, 29997.482800, 474.592014, 361.894410, 107.719554, X, Y) && !ellipse(26600.926200, 29758.172800, 667.509619, 240.872007, 15.272700, X, Y) && !ellipse(25899.167694, 29565.157806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28495.261660, 29560.350600, 460.887213, 460.887213, 0.000000, X, Y) && !ellipse(25285.672729, 29166.507812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.420105, 29001.314545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24158.687134, 28305.627838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.212000, 27227.400000, 1219.424035, 1219.424035, 0.000000, X, Y) && !ellipse(30307.736000, 27517.478000, 1294.984037, 1294.984037, 0.000000, X, Y) && !ellipse(34808.160980, 26018.269653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.320740, 24547.994080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28489.482000, 24110.118000, 1291.888037, 643.935219, 249.497000, X, Y) && !ellipse(18109.123230, 24491.399475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33273.848755, 24198.528503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.017059, 23776.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34663.876068, 23630.437195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29134.214691, 23626.303314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27919.382000, 23257.358000, 514.929615, 514.929615, 0.000000, X, Y) && !ellipse(22977.828000, 22597.842000, 1275.344037, 1275.344037, 0.000000, X, Y) && !ellipse(28313.250000, 23070.026000, 1031.440030, 1031.440030, 0.000000, X, Y) && !ellipse(35428.710358, 22228.940155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33550.614319, 22109.666946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25740.797852, 22139.524078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27050.067139, 22557.340729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15616.687927, 21716.373474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25320.647430, 21615.692108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28860.847565, 12162.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24968.672852, 21267.227478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38853.974274, 20653.448425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31149.615570, 19645.536911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40052.913818, 19186.065506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16688.803360, 18986.927689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8674.420204, 18998.800980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17333.950256, 18577.232773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19030.277600, 17938.791600, 427.384012, 289.117608, 22.346200, X, Y) && !ellipse(9995.232895, 15901.721252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18638.611800, 15886.939800, 507.789615, 356.537610, 20.359582, X, Y) && !ellipse(18899.736600, 12999.534706, 1805.112052, 288.423208, 21.725695, X, Y) && !ellipse(29246.296753, 7618.678337, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 05:18:55 2013] Writing fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50.gif
[Sun Jun 16 06:21:38 2013] Mean detx,y = (-1347.22, 215.04) 
[Sun Jun 16 06:21:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 06:39:27 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 06:39:28 2013] Setting source spectrum file to fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jun 16 06:39:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sun Jun 16 11:51:21 2013] Updating aperture counts using extracted products
[Sun Jun 16 11:51:21 2013] Total counts from fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 427358.00
[Sun Jun 16 11:51:21 2013] Total counts from fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50_bgd.pi.gz = 186360.00
[Sun Jun 16 11:51:21 2013] Got source and background scale factors 38796950.000000, 302081475.000000
[Sun Jun 16 11:51:22 2013] User source parameters:
  Position = (278.7, 270.3) = 23 57 10.23 -34 47 25.2
  Extent = 31.9 (31.9-63.8)", rotation angle = 0
  Source aperture counts = 403423.4 +/- 654.7
  Background aperture counts = 23934.6
  Rate = 5 +/- 0.008

[Sun Jun 16 11:51:32 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 11:51:32 2013] Using photon index=1.80, rate=0.0142, arf fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50.arf
[Sun Jun 16 11:51:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 11:51:32 2013] Updating source flux to 3.9e-14
[Sun Jun 16 11:52:28 2013] Flag b found in src. 50 procflags, skipping spectral fitting
[Sun Jun 16 11:52:28 2013] Flag c found in src. 50 procflags, skipping spectral fitting
[Sun Jun 16 11:52:57 2013] xmm0723801001/analysis//spectral/fullrun_pn_xmm0723801001_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete