[Fri Jun 14 16:13:20 2013] Detection parameters:
  Position = (289.4, 323.3) = 23 57 6.44 -34 43 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 521.6 +/- 43.6
  Background counts = 407.6
  Rate = 0.007 +/- 0.0006

[Fri Jun 14 16:13:21 2013] Off-axis axis estimate = 1.92'
[Sat Jun 15 01:49:27 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 01:49:27 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Sat Jun 15 01:49:27 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.983
[Sat Jun 15 01:49:27 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.39"
[Sat Jun 15 03:54:04 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 15 03:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 03:54:04 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 15 03:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src3.csv
[Sat Jun 15 03:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:05 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 15 03:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 03:54:05 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 15 03:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 15 03:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:43 2013] Source 6 is offset by 6.055537 and -7.426353 pixels which is larger than
2 X fitted extent = 6.793471 x 6.793471, not incorporating fit results
[Sat Jun 15 03:54:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:43 2013] Assessing source extent using major
[Sat Jun 15 03:54:43 2013] Source does appear to be extended
[Sat Jun 15 03:54:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:21:32 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 03:21:32 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Sun Jun 16 03:21:32 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.983
[Sun Jun 16 03:21:32 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.39"
[Sun Jun 16 05:17:53 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 16 05:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 05:17:53 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 16 05:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 05:17:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:17:54 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 16 05:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 16 05:17:54 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 16 05:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 16 05:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:18:36 2013] Spatial fit model total counts = 7067.300000, observed total counts = 6206.000000
[Sun Jun 16 05:18:36 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 05:18:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:18:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:18:36 2013] Assessing source extent using major
[Sun Jun 16 05:18:36 2013] Source does appear to be extended
[Sun Jun 16 05:18:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 09:54:19 2013] XMMSAS src. selection expression = ellipse(25129.843750, 28079.743256, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 09:54:19 2013] Writing source region out to fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 16 09:54:19 2013] Extracting stamp from image fullrun_mos2_xmm0723801001_pi300-10000_cl_sm2.00.img.gz, (252, 286) - (327, 361)
[Sun Jun 16 09:54:19 2013] XMMSAS bgd. selection expression = annulus(25129.843750, 28079.743256, 1087.500000, 2175.000000, X, Y) && !ellipse(26606.188320, 25548.755200, 4851.120140, 3613.248104, 49.610800, X, Y) && !ellipse(24354.622986, 26783.284485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23483.446808, 25824.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.466858, 27456.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26693.247131, 29805.491058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26322.294403, 29457.148560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25743.418365, 28760.946777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26640.110000, 31240.580000, 1355.592039, 524.440015, 88.251490, X, Y) && !ellipse(27791.080000, 28284.674000, 1275.656037, 1275.656037, 0.000000, X, Y) && !ellipse(28439.930000, 29162.446000, 2551.312073, 2551.312073, 0.000000, X, Y) && !ellipse(26629.688385, 30768.597626, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 09:54:19 2013] Writing fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6.gif
[Sun Jun 16 10:08:18 2013] Mean detx,y = (-734.14, -2789.22) 
[Sun Jun 16 10:08:20 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 10:08:35 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 10:08:36 2013] Setting source spectrum file to fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 16 10:08:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 16 10:50:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 10:50:51 2013] rmf not generated due to insufficient counts
[Sun Jun 16 11:51:46 2013] Updating aperture counts using extracted products
[Sun Jun 16 11:51:46 2013] Total counts from fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 4293.00
[Sun Jun 16 11:51:46 2013] Total counts from fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6_bgd.pi.gz = 5440.00
[Sun Jun 16 11:51:46 2013] Got source and background scale factors 1178660.000000, 3688780.000000
[Sun Jun 16 11:51:46 2013] User source parameters:
  Position = (289.4, 323.3) = 23 57 6.44 -34 43 41.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2554.8 +/- 66.5
  Background aperture counts = 1738.2
  Rate = 0.03 +/- 0.0007

[Sun Jun 16 11:51:46 2013] Updating counts from extracted products
[Sun Jun 16 11:51:46 2013] Set source signif. to 2554.78/41.69 = 61.28
[Sun Jun 16 11:51:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 11:51:55 2013] Using photon index=1.80, rate=0.0275, arf fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6.arf
[Sun Jun 16 11:51:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 11:51:55 2013] Updating source flux to 3e-13
[Sun Jun 16 11:52:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 11:52:28 2013] xmm0723801001/analysis//spectral/fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete