[Fri Jun 14 16:13:20 2013] Detection parameters:
  Position = (220.3, 247.2) = 23 57 30.84 -34 49 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 417.5 +/- 28.1
  Background counts = 107.1
  Rate = 0.006 +/- 0.0004

[Fri Jun 14 16:13:21 2013] Off-axis axis estimate = 6.77'
[Sat Jun 15 01:49:27 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 01:49:27 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Sat Jun 15 01:49:27 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.889
[Sat Jun 15 01:49:27 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.81"
[Sat Jun 15 03:54:04 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 15 03:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 03:54:04 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 15 03:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 03:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:05 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 15 03:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 03:54:05 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 15 03:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 03:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:43 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.348746 pixels away
[Sat Jun 15 03:54:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:43 2013] Assessing source extent using major
[Sat Jun 15 03:54:43 2013] Source does appear to be extended
[Sat Jun 15 03:54:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:21:32 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 03:21:32 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Sun Jun 16 03:21:32 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.889
[Sun Jun 16 03:21:32 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 9.81"
[Sun Jun 16 05:17:53 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 16 05:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src6.csv
[Sun Jun 16 05:17:53 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 16 05:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src6.csv
[Sun Jun 16 05:17:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:17:54 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 16 05:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 16 05:17:54 2013] fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 16 05:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 16 05:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:18:36 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.031036 pixels away
[Sun Jun 16 05:18:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:18:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:18:36 2013] Assessing source extent using major
[Sun Jun 16 05:18:36 2013] Source does appear to be extended
[Sun Jun 16 05:18:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 09:54:19 2013] XMMSAS src. selection expression = ellipse(19120.717270, 21459.386551, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 09:54:19 2013] Writing source region out to fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 16 09:54:19 2013] Extracting stamp from image fullrun_mos2_xmm0723801001_pi300-10000_cl_sm2.00.img.gz, (183, 210) - (258, 285)
[Sun Jun 16 09:54:19 2013] XMMSAS bgd. selection expression = annulus(19120.717270, 21459.386551, 1087.500000, 2175.000000, X, Y) && !ellipse(19871.604800, 18711.762000, 1348.176039, 772.417622, 93.905650, X, Y)
[Sun Jun 16 09:54:19 2013] Writing fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11.gif
[Sun Jun 16 10:10:04 2013] Mean detx,y = (-1250.79, 6020.59) 
[Sun Jun 16 10:10:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 10:10:38 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 10:10:39 2013] Setting source spectrum file to fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 16 10:10:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 16 10:51:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 10:51:33 2013] rmf not generated due to insufficient counts
[Sun Jun 16 11:51:47 2013] Updating aperture counts using extracted products
[Sun Jun 16 11:51:47 2013] Total counts from fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 816.00
[Sun Jun 16 11:51:47 2013] Total counts from fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11_bgd.pi.gz = 4427.00
[Sun Jun 16 11:51:47 2013] Got source and background scale factors 1075696.000000, 9162678.000000
[Sun Jun 16 11:51:47 2013] User source parameters:
  Position = (220.3, 247.2) = 23 57 30.84 -34 49 4.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 296.3 +/- 29.6
  Background aperture counts = 519.7
  Rate = 0.003 +/- 0.0003

[Sun Jun 16 11:51:47 2013] Updating counts from extracted products
[Sun Jun 16 11:51:47 2013] Set source signif. to 296.27/22.80 = 13.00
[Sun Jun 16 11:51:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 11:51:55 2013] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11.arf
[Sun Jun 16 11:51:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 11:51:55 2013] Updating source flux to 4.9e-14
[Sun Jun 16 11:52:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 11:52:28 2013] xmm0723801001/analysis//spectral/fullrun_mos2_xmm0723801001_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete