[Fri Jun 14 16:12:50 2013] Detection parameters:
  Position = (112.7, 239.0) = 23 58 8.86 -34 49 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 950.3 +/- 38.8
  Background counts = 45.5
  Rate = 0.01 +/- 0.0004

[Fri Jun 14 16:12:52 2013] Off-axis axis estimate = 14.14'
[Fri Jun 14 22:38:47 2013] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 22:38:47 2013] Initial guess for spatial extent in simple fitting = 13.50"
[Fri Jun 14 22:38:47 2013] source mask rpix=3.1, npix_max = 51, mask sum = 44, frac = 0.847
[Fri Jun 14 22:38:47 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 13.50"
[Sat Jun 15 01:49:25 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src8.ximg exists
[Sat Jun 15 01:49:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src8.csv
[Sat Jun 15 01:49:25 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Jun 15 01:49:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src8.csv
[Sat Jun 15 01:49:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 01:49:26 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Jun 15 01:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Jun 15 01:49:26 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Jun 15 01:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Jun 15 01:49:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:34 2013] Spatial fit model total counts = 7114.790000, observed total counts = 2942.000000
[Sat Jun 15 03:54:34 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:54:34 2013] Source 6 is offset by 2.395504 and -4.708095 pixels which is larger than
2 X fitted extent = 1.523048 x 1.523048, not incorporating fit results
[Sat Jun 15 03:54:34 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.142592 pixels away
[Sat Jun 15 03:54:34 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.908935 pixels away
[Sat Jun 15 03:54:34 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:34 2013] Assessing source extent using major
[Sat Jun 15 03:54:34 2013] Source does appear to be extended
[Sat Jun 15 03:54:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:10:54 2013] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:10:54 2013] Initial guess for spatial extent in simple fitting = 13.50"
[Sun Jun 16 01:10:54 2013] source mask rpix=3.1, npix_max = 51, mask sum = 44, frac = 0.847
[Sun Jun 16 01:10:54 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 13.50"
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src8.csv
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src8.csv
[Sun Jun 16 03:21:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun 16 03:21:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:18:27 2013] Source 6 is offset by 2.395504 and -4.708095 pixels which is larger than
2 X fitted extent = 1.523048 x 1.523048, not incorporating fit results
[Sun Jun 16 05:18:27 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.011743 pixels away
[Sun Jun 16 05:18:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:18:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:18:27 2013] Assessing source extent using major
[Sun Jun 16 05:18:27 2013] Source does appear to be extended
[Sun Jun 16 05:18:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 08:30:37 2013] XMMSAS src. selection expression = ellipse(9757.368820, 20742.435715, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 08:30:37 2013] Writing source region out to fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 16 08:30:37 2013] Extracting stamp from image fullrun_mos1_xmm0723801001_pi300-10000_cl_sm2.00.img.gz, (75, 201) - (150, 276)
[Sun Jun 16 08:30:37 2013] XMMSAS bgd. selection expression = annulus(9757.368820, 20742.435715, 1087.500000, 2175.000000, X, Y) && !ellipse(8993.911163, 21354.008438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7947.903297, 22156.221558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10625.945724, 20059.479874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7361.617073, 22658.972595, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 08:30:37 2013] Writing fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6.gif
[Sun Jun 16 08:45:56 2013] Mean detx,y = (12717.98, 7937.89) 
[Sun Jun 16 08:45:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 08:46:20 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 08:46:20 2013] Setting source spectrum file to fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 16 08:46:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 16 09:14:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 09:14:06 2013] rmf not generated due to insufficient counts
[Sun Jun 16 11:51:36 2013] Updating aperture counts using extracted products
[Sun Jun 16 11:51:36 2013] Total counts from fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 1947.00
[Sun Jun 16 11:51:36 2013] Total counts from fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6_bgd.pi.gz = 709.00
[Sun Jun 16 11:51:36 2013] Got source and background scale factors 981932.000000, 3308496.000000
[Sun Jun 16 11:51:36 2013] User source parameters:
  Position = (112.7, 239.0) = 23 58 8.86 -34 49 40.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1736.6 +/- 45.1
  Background aperture counts = 210.4
  Rate = 0.02 +/- 0.0005

[Sun Jun 16 11:51:36 2013] Updating counts from extracted products
[Sun Jun 16 11:51:36 2013] Set source signif. to 1736.58/14.51 = 119.71
[Sun Jun 16 11:51:42 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 11:51:42 2013] Using photon index=1.80, rate=0.0186, arf fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6.arf
[Sun Jun 16 11:51:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 11:51:43 2013] Updating source flux to 4.6e-13
[Sun Jun 16 11:51:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 11:52:11 2013] xmm0723801001/analysis//spectral/fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete