[Fri Jun 14 16:12:50 2013] Detection parameters:
  Position = (85.2, 261.0) = 23 58 18.57 -34 48 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 792.8 +/- 35.7
  Background counts = 40.6
  Rate = 0.008 +/- 0.0004

[Fri Jun 14 16:12:52 2013] Off-axis axis estimate = 15.70'
[Fri Jun 14 22:38:47 2013] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 22:38:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 22:38:47 2013] Initial guess for spatial extent in simple fitting = 14.28"
[Fri Jun 14 22:38:47 2013] source mask rpix=3.3, npix_max = 57, mask sum = 42, frac = 0.734
[Fri Jun 14 22:38:47 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 14.28"
[Sat Jun 15 01:49:25 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun 15 01:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src9.csv
[Sat Jun 15 01:49:26 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun 15 01:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src9.csv
[Sat Jun 15 01:49:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 01:49:26 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun 15 01:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun 15 01:49:26 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun 15 01:49:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun 15 01:49:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:34 2013] Spatial fit model total counts = 10352.600000, observed total counts = 2718.000000
[Sat Jun 15 03:54:34 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:54:34 2013] Warning, spatial fit 9 centroid is now closest to src. 2
[Sat Jun 15 03:54:34 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:34 2013] Assessing source extent using major
[Sat Jun 15 03:54:34 2013] Source does appear to be extended
[Sat Jun 15 03:54:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:10:54 2013] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:10:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 01:10:54 2013] Initial guess for spatial extent in simple fitting = 14.28"
[Sun Jun 16 01:10:54 2013] source mask rpix=3.3, npix_max = 57, mask sum = 42, frac = 0.734
[Sun Jun 16 01:10:54 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 14.28"
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src9.csv
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src9.csv
[Sun Jun 16 03:21:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 16 03:21:31 2013] fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 16 03:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 16 03:21:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0723801001_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:18:27 2013] Source 1 is offset by 6.618288 and -7.439097 pixels which is larger than
2 X fitted extent = 1.618064 x 1.618064, not incorporating fit results
[Sun Jun 16 05:18:27 2013] Warning, spatial fit 9 centroid is now closest to src. 5
[Sun Jun 16 05:18:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:18:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:18:27 2013] Assessing source extent using major
[Sun Jun 16 05:18:27 2013] Source does appear to be extended
[Sun Jun 16 05:18:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 08:30:37 2013] XMMSAS src. selection expression = ellipse(7361.617073, 22658.972595, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 08:30:37 2013] Writing source region out to fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 16 08:30:37 2013] Extracting stamp from image fullrun_mos1_xmm0723801001_pi300-10000_cl_sm2.00.img.gz, (48, 224) - (123, 299)
[Sun Jun 16 08:30:37 2013] XMMSAS bgd. selection expression = annulus(7361.617073, 22658.972595, 1087.500000, 2175.000000, X, Y) && !ellipse(8993.911163, 21354.008438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7947.903297, 22156.221558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9757.368820, 20742.435715, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 08:30:37 2013] Writing fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1.gif
[Sun Jun 16 08:46:34 2013] Mean detx,y = (12683.03, 10882.63) 
[Sun Jun 16 08:46:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 08:47:11 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 08:47:11 2013] Setting source spectrum file to fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 16 08:47:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 16 09:14:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 09:14:24 2013] rmf not generated due to insufficient counts
[Sun Jun 16 11:51:37 2013] Updating aperture counts using extracted products
[Sun Jun 16 11:51:37 2013] Total counts from fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1428.00
[Sun Jun 16 11:51:37 2013] Total counts from fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1_bgd.pi.gz = 680.00
[Sun Jun 16 11:51:37 2013] Got source and background scale factors 628676.000000, 3163997.000000
[Sun Jun 16 11:51:37 2013] User source parameters:
  Position = (85.2, 261.0) = 23 58 18.57 -34 48 3.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1292.9 +/- 38.8
  Background aperture counts = 135.1
  Rate = 0.01 +/- 0.0004

[Sun Jun 16 11:51:37 2013] Updating counts from extracted products
[Sun Jun 16 11:51:37 2013] Set source signif. to 1292.89/11.62 = 111.23
[Sun Jun 16 11:51:43 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 11:51:43 2013] Using photon index=1.80, rate=0.0139, arf fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1.arf
[Sun Jun 16 11:51:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 11:51:43 2013] Updating source flux to 5.1e-13
[Sun Jun 16 11:51:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 11:52:11 2013] xmm0723801001/analysis//spectral/fullrun_mos1_xmm0723801001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete