[Wed Jun  5 09:09:14 2013] Detection parameters:
  Position = (342.6, 312.7) = 8 35 28.33 -4 5 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.5 +/- 23.8
  Background counts = 326.7
  Rate = 0.004 +/- 0.0006

[Wed Jun  5 09:09:14 2013] Off-axis axis estimate = 3.36'
[Wed Jun  5 09:25:40 2013] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 09:25:40 2013] Initial guess for spatial extent in simple fitting = 8.11"
[Wed Jun  5 09:25:40 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.984
[Wed Jun  5 09:25:40 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.11"
[Wed Jun  5 09:41:48 2013] fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun  5 09:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_src3.csv
[Wed Jun  5 09:41:48 2013] fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun  5 09:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_src3.csv
[Wed Jun  5 09:41:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 09:41:48 2013] fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun  5 09:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun  5 09:41:48 2013] fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun  5 09:41:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun  5 09:41:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 13:38:12 2013] Spatial fit model total counts = 3960.620000, observed total counts = 2918.000000
[Wed Jun  5 13:38:12 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 13:38:12 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 13:38:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 13:38:12 2013] Assessing source extent using major
[Wed Jun  5 13:38:12 2013] Source does appear to be extended
[Wed Jun  5 13:38:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 13:38:12 2013] Deleting source due to low Poisson probability 0.9