[Wed Jun  5 09:10:07 2013] Detection parameters:
  Position = (401.0, 269.9) = 8 35 11.32 -4 9 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 617.1 +/- 30.4
  Background counts = 55.6
  Rate = 0.01 +/- 0.0007

[Wed Jun  5 09:10:08 2013] Off-axis axis estimate = 7.72'
[Wed Jun  5 12:01:18 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 12:01:18 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Wed Jun  5 12:01:18 2013] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.822
[Wed Jun  5 12:01:18 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.29"
[Wed Jun  5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun  5 13:38:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src3.csv
[Wed Jun  5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun  5 13:38:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src3.csv
[Wed Jun  5 13:38:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun  5 13:38:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun  5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun  5 13:38:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun  5 13:38:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 13:38:24 2013] Warning, spatial fit 3 centroid is now closest to src. 15
[Wed Jun  5 13:38:24 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 13:38:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 13:38:24 2013] Assessing source extent using major
[Wed Jun  5 13:38:24 2013] Source does appear to be extended
[Wed Jun  5 13:38:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 15:34:06 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 15:34:06 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Wed Jun  5 15:34:06 2013] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.822
[Wed Jun  5 15:34:06 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.29"
[Wed Jun  5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun  5 17:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src3.csv
[Wed Jun  5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun  5 17:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src3.csv
[Wed Jun  5 17:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun  5 17:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun  5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun  5 17:36:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun  5 17:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 17:36:31 2013] Warning, spatial fit 3 centroid is now closest to src. 15
[Wed Jun  5 17:36:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 17:36:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 17:36:31 2013] Assessing source extent using major
[Wed Jun  5 17:36:31 2013] Source does appear to be extended
[Wed Jun  5 17:36:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 19:04:27 2013] XMMSAS src. selection expression = ellipse(34842.458649, 23434.482758, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 19:04:27 2013] Writing source region out to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun  5 19:04:27 2013] Extracting stamp from image fullrun_mos2_xmm0701981601_pi300-10000_cl_sm2.00.img.gz, (364, 232) - (439, 307)
[Wed Jun  5 19:04:27 2013] XMMSAS bgd. selection expression = annulus(34842.458649, 23434.482758, 1087.500000, 2175.000000, X, Y) && !ellipse(35252.650055, 25411.531738, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  5 19:04:27 2013] Writing fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3.gif
[Wed Jun  5 19:15:50 2013] Mean detx,y = (-6959.73, -6093.02) 
[Wed Jun  5 19:15:51 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 19:16:12 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 19:16:12 2013] Setting source spectrum file to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun  5 19:16:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun  5 19:27:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 19:27:56 2013] rmf not generated due to insufficient counts
[Wed Jun  5 19:57:07 2013] Updating aperture counts using extracted products
[Wed Jun  5 19:57:08 2013] Total counts from fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 729.00
[Wed Jun  5 19:57:08 2013] Total counts from fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1468.00
[Wed Jun  5 19:57:08 2013] Got source and background scale factors 888578.000000, 6196751.000000
[Wed Jun  5 19:57:08 2013] User source parameters:
  Position = (401.0, 269.9) = 8 35 11.32 -4 9 1.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 518.5 +/- 28.0
  Background aperture counts = 210.5
  Rate = 0.008 +/- 0.0004

[Wed Jun  5 19:57:08 2013] Updating counts from extracted products
[Wed Jun  5 19:57:08 2013] Set source signif. to 518.50/14.51 = 35.74
[Wed Jun  5 19:57:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 19:57:11 2013] Using photon index=1.80, rate=0.00827, arf fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3.arf
[Wed Jun  5 19:57:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 19:57:11 2013] Updating source flux to 1.7e-13
[Wed Jun  5 19:57:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 19:57:21 2013] xmm0701981601/analysis//spectral/fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete