[Wed Jun  5 09:10:08 2013] Detection parameters:
  Position = (218.1, 351.6) = 8 36 4.53 -4 3 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.4 +/- 11.5
  Background counts = 48.3
  Rate = 0.001 +/- 0.0002

[Wed Jun  5 09:10:08 2013] Off-axis axis estimate = 6.99'
[Wed Jun  5 12:01:18 2013] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 12:01:18 2013] Initial guess for spatial extent in simple fitting = 9.92"
[Wed Jun  5 12:01:18 2013] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.614
[Wed Jun  5 12:01:18 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.92"
[Wed Jun  5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jun  5 13:38:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src25.csv
[Wed Jun  5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jun  5 13:38:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src25.csv
[Wed Jun  5 13:38:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 13:38:10 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jun  5 13:38:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun  5 13:38:10 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jun  5 13:38:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun  5 13:38:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 13:38:24 2013] Spatial fit model total counts = -793.180000, observed total counts = 268.000000
[Wed Jun  5 13:38:24 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 13:38:24 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 13:38:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 13:38:24 2013] Assessing source extent using major
[Wed Jun  5 13:38:24 2013] Source does appear to be extended
[Wed Jun  5 13:38:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 15:34:06 2013] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 15:34:06 2013] Initial guess for spatial extent in simple fitting = 9.92"
[Wed Jun  5 15:34:06 2013] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.614
[Wed Jun  5 15:34:06 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 9.92"
[Wed Jun  5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src23.ximg exists
[Wed Jun  5 17:36:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src23.csv
[Wed Jun  5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Jun  5 17:36:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src23.csv
[Wed Jun  5 17:36:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 17:36:20 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Jun  5 17:36:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Jun  5 17:36:20 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Jun  5 17:36:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Jun  5 17:36:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 17:36:31 2013] Spatial fit model total counts = -1404.200000, observed total counts = 268.000000
[Wed Jun  5 17:36:31 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 17:36:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 17:36:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 17:36:31 2013] Assessing source extent using major
[Wed Jun  5 17:36:31 2013] Source does appear to be extended
[Wed Jun  5 17:36:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 19:04:27 2013] XMMSAS src. selection expression = ellipse(18922.983963, 30540.652740, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 19:04:27 2013] Writing source region out to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22_src.reg
[Wed Jun  5 19:04:27 2013] Extracting stamp from image fullrun_mos2_xmm0701981601_pi300-10000_cl_sm2.00.img.gz, (181, 314) - (256, 389)
[Wed Jun  5 19:04:27 2013] XMMSAS bgd. selection expression = annulus(18922.983963, 30540.652740, 1087.500000, 2175.000000, X, Y)
[Wed Jun  5 19:04:27 2013] Writing fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22.gif
[Wed Jun  5 19:22:50 2013] Mean detx,y = (7082.20, 4480.88) 
[Wed Jun  5 19:22:51 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 19:23:11 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 19:23:12 2013] Setting source spectrum file to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jun  5 19:23:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jun  5 19:55:49 2013] Not generating rmf since there are only 80 counts
[Wed Jun  5 19:55:49 2013] rmf not generated due to insufficient counts
[Wed Jun  5 19:57:11 2013] Updating aperture counts using extracted products
[Wed Jun  5 19:57:11 2013] Total counts from fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 205.00
[Wed Jun  5 19:57:11 2013] Total counts from fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22_bgd.pi.gz = 989.00
[Wed Jun  5 19:57:11 2013] Got source and background scale factors 752482.000000, 5155894.000000
[Wed Jun  5 19:57:11 2013] User source parameters:
  Position = (218.1, 351.6) = 8 36 4.53 -4 3 0.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 60.7 +/- 15.3
  Background aperture counts = 144.3
  Rate = 0.001 +/- 0.0002

[Wed Jun  5 19:57:11 2013] Updating counts from extracted products
[Wed Jun  5 19:57:11 2013] Set source signif. to 60.66/12.01 = 5.05
[Wed Jun  5 19:57:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 19:57:11 2013] Using photon index=1.80, rate=0.000967, arf fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22.arf
[Wed Jun  5 19:57:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 19:57:11 2013] Updating source flux to 4.4e-14
[Wed Jun  5 19:57:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 19:57:21 2013] xmm0701981601/analysis//spectral/fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete