[Wed Jun 5 09:10:07 2013] Detection parameters: Position = (492.1, 379.7) = 8 34 44.85 -4 1 4.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 96.4 +/- 14.9 Background counts = 43.1 Rate = 0.001 +/- 0.0002 [Wed Jun 5 09:10:08 2013] Off-axis axis estimate = 15.23' [Wed Jun 5 12:01:18 2013] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 12:01:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Jun 5 12:01:18 2013] Initial guess for spatial extent in simple fitting = 14.04" [Wed Jun 5 12:01:18 2013] source mask rpix=3.2, npix_max = 55, mask sum = 50, frac = 0.899 [Wed Jun 5 12:01:18 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 14.04" [Wed Jun 5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src23.ximg exists [Wed Jun 5 13:38:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src23.csv [Wed Jun 5 13:38:09 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src23_1.ximg exists [Wed Jun 5 13:38:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src23.csv [Wed Jun 5 13:38:09 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 13:38:10 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Wed Jun 5 13:38:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src23.csv [Wed Jun 5 13:38:10 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Wed Jun 5 13:38:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src23.csv [Wed Jun 5 13:38:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 13:38:24 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 18.196955 pixels away [Wed Jun 5 13:38:24 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 13:38:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 13:38:24 2013] Assessing source extent using major [Wed Jun 5 13:38:24 2013] Source does appear to be extended [Wed Jun 5 13:38:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 15:34:06 2013] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 15:34:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Jun 5 15:34:06 2013] Initial guess for spatial extent in simple fitting = 14.04" [Wed Jun 5 15:34:06 2013] source mask rpix=3.2, npix_max = 55, mask sum = 50, frac = 0.899 [Wed Jun 5 15:34:06 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 14.04" [Wed Jun 5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src22.ximg exists [Wed Jun 5 17:36:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src22.csv [Wed Jun 5 17:36:19 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src22_1.ximg exists [Wed Jun 5 17:36:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src22.csv [Wed Jun 5 17:36:19 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src22_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 17:36:20 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists [Wed Jun 5 17:36:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src22.csv [Wed Jun 5 17:36:20 2013] fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists [Wed Jun 5 17:36:20 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src22.csv [Wed Jun 5 17:36:20 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 17:36:31 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 18.378999 pixels away [Wed Jun 5 17:36:31 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 17:36:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 17:36:31 2013] Assessing source extent using major [Wed Jun 5 17:36:31 2013] Source does appear to be extended [Wed Jun 5 17:36:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 19:04:27 2013] XMMSAS src. selection expression = ellipse(42766.053741, 32989.731415, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 5 19:04:27 2013] Writing source region out to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12_src.reg [Wed Jun 5 19:04:27 2013] Extracting stamp from image fullrun_mos2_xmm0701981601_pi300-10000_cl_sm2.00.img.gz, (455, 342) - (530, 417) [Wed Jun 5 19:04:27 2013] XMMSAS bgd. selection expression = annulus(42766.053741, 32989.731415, 1087.500000, 2175.000000, X, Y) [Wed Jun 5 19:04:27 2013] Writing fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12.gif [Wed Jun 5 19:22:26 2013] Mean detx,y = (-16668.69, 1297.60) [Wed Jun 5 19:22:27 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 19:22:44 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 19:22:44 2013] Setting source spectrum file to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12_src_b10.pi.gz [Wed Jun 5 19:22:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12_bgd.pi.gz [Wed Jun 5 19:55:36 2013] Not generating rmf since there are only 96 counts [Wed Jun 5 19:55:36 2013] rmf not generated due to insufficient counts [Wed Jun 5 19:57:10 2013] Updating aperture counts using extracted products [Wed Jun 5 19:57:10 2013] Total counts from fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 252.00 [Wed Jun 5 19:57:10 2013] Total counts from fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12_bgd.pi.gz = 1032.00 [Wed Jun 5 19:57:11 2013] Got source and background scale factors 879166.000000, 5204078.000000 [Wed Jun 5 19:57:11 2013] User source parameters: Position = (492.1, 379.7) = 8 34 44.85 -4 1 4.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 77.7 +/- 16.9 Background aperture counts = 174.3 Rate = 0.001 +/- 0.0003 [Wed Jun 5 19:57:11 2013] Updating counts from extracted products [Wed Jun 5 19:57:11 2013] Set source signif. to 77.66/13.20 = 5.88 [Wed Jun 5 19:57:11 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 19:57:11 2013] Using photon index=1.80, rate=0.00124, arf fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12.arf [Wed Jun 5 19:57:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 19:57:11 2013] Updating source flux to 4.3e-14 [Wed Jun 5 19:57:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 5 19:57:21 2013] xmm0701981601/analysis//spectral/fullrun_mos2_xmm0701981601_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete