[Wed Jun 5 09:09:42 2013] Detection parameters: Position = (370.0, 484.9) = 8 35 20.36 -3 53 23.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 164.4 +/- 18.0 Background counts = 55.0 Rate = 0.003 +/- 0.0003 [Wed Jun 5 09:09:43 2013] Off-axis axis estimate = 14.48' [Wed Jun 5 09:41:48 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 09:41:48 2013] Initial guess for spatial extent in simple fitting = 13.67" [Wed Jun 5 09:41:48 2013] source mask rpix=3.1, npix_max = 53, mask sum = 51, frac = 0.961 [Wed Jun 5 09:41:48 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 13.67" [Wed Jun 5 12:01:17 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src18.ximg exists [Wed Jun 5 12:01:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src18.csv [Wed Jun 5 12:01:17 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src18_1.ximg exists [Wed Jun 5 12:01:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src18.csv [Wed Jun 5 12:01:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 12:01:17 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Wed Jun 5 12:01:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src18.csv [Wed Jun 5 12:01:17 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Wed Jun 5 12:01:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src18.csv [Wed Jun 5 12:01:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 13:38:19 2013] Warning, spatial fit 18 centroid is now closest to src. 11 [Wed Jun 5 13:38:19 2013] Spatial fit model total counts = 1538.860000, observed total counts = 1294.000000 [Wed Jun 5 13:38:19 2013] Poor agreement between spatial fit and data for source 5 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 5 13:38:19 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 13:38:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 13:38:19 2013] Assessing source extent using major [Wed Jun 5 13:38:19 2013] Source does appear to be extended [Wed Jun 5 13:38:19 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 13:38:19 2013] Source is confused with source 7 [Wed Jun 5 13:49:31 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 13:49:31 2013] Initial guess for spatial extent in simple fitting = 13.67" [Wed Jun 5 13:49:31 2013] source mask rpix=3.1, npix_max = 53, mask sum = 51, frac = 0.961 [Wed Jun 5 13:49:31 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 13.67" [Wed Jun 5 15:34:04 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_src18.ximg exists [Wed Jun 5 15:34:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_src18.csv [Wed Jun 5 15:34:05 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_src18_1.ximg exists [Wed Jun 5 15:34:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_src18.csv [Wed Jun 5 15:34:05 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 15:34:05 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Wed Jun 5 15:34:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src18.csv [Wed Jun 5 15:34:05 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Wed Jun 5 15:34:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src18.csv [Wed Jun 5 15:34:05 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0701981601_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 17:36:27 2013] Warning, spatial fit 18 centroid is now closest to src. 10 [Wed Jun 5 17:36:27 2013] Source 5 is offset by 6.795021 and -3.157670 pixels which is larger than 2 X fitted extent = 3.052055 x 1.554837, not incorporating fit results [Wed Jun 5 17:36:27 2013] Spatial fit model total counts = 1539.280000, observed total counts = 1294.000000 [Wed Jun 5 17:36:27 2013] Poor agreement between spatial fit and data for source 5 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 5 17:36:27 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 17:36:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 17:36:27 2013] Assessing source extent using major [Wed Jun 5 17:36:27 2013] Source does appear to be extended [Wed Jun 5 17:36:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 18:19:55 2013] XMMSAS src. selection expression = ellipse(32141.162811, 42141.630676, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 5 18:19:55 2013] Writing source region out to fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5_src.reg [Wed Jun 5 18:19:55 2013] Extracting stamp from image fullrun_mos1_xmm0701981601_pi300-10000_cl_sm2.00.img.gz, (332, 447) - (407, 522) [Wed Jun 5 18:19:55 2013] XMMSAS bgd. selection expression = annulus(32141.162811, 42141.630676, 1087.500000, 2175.000000, X, Y) && !ellipse(31458.308000, 42005.982000, 2345.064067, 293.132808, 344.707300, X, Y) && !ellipse(34212.114868, 42635.875000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32701.129730, 42282.445465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33575.953918, 42496.100983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30575.977905, 41747.300415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31318.419678, 41301.186462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30670.308441, 41167.298645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32328.214000, 41495.011510, 2145.088062, 400.960812, 337.513300, X, Y) && !ellipse(32652.686066, 41691.560730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31697.902000, 41287.058000, 1762.576051, 582.487217, 351.502450, X, Y) [Wed Jun 5 18:19:55 2013] Writing fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5.gif [Wed Jun 5 18:33:45 2013] Mean detx,y = (12741.49, 8533.48) [Wed Jun 5 18:33:46 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 18:33:58 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 18:33:59 2013] Setting source spectrum file to fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Wed Jun 5 18:33:59 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5_bgd.pi.gz [Wed Jun 5 18:53:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jun 5 18:53:58 2013] rmf not generated due to insufficient counts [Wed Jun 5 19:57:05 2013] Updating aperture counts using extracted products [Wed Jun 5 19:57:05 2013] Total counts from fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 663.00 [Wed Jun 5 19:57:05 2013] Total counts from fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 372.00 [Wed Jun 5 19:57:05 2013] Got source and background scale factors 842526.000000, 1513593.000000 [Wed Jun 5 19:57:05 2013] User source parameters: Position = (370.0, 484.9) = 8 35 20.36 -3 53 23.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 455.9 +/- 26.8 Background aperture counts = 207.1 Rate = 0.007 +/- 0.0004 [Wed Jun 5 19:57:05 2013] Updating counts from extracted products [Wed Jun 5 19:57:05 2013] Set source signif. to 455.93/14.39 = 31.68 [Wed Jun 5 19:57:07 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 19:57:07 2013] Using photon index=1.80, rate=0.00722, arf fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5.arf [Wed Jun 5 19:57:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 19:57:07 2013] Updating source flux to 2e-13 [Wed Jun 5 19:57:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 5 19:57:18 2013] xmm0701981601/analysis//spectral/fullrun_mos1_xmm0701981601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete