[Wed Jun  5 09:09:43 2013] Detection parameters:
  Position = (398.4, 367.9) = 8 35 12.11 -4 1 55.7
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 62.6 +/- 12.6
  Background counts = 240.9
  Rate = 0.002 +/- 0.0004

[Wed Jun  5 09:09:43 2013] Off-axis axis estimate = 8.82'
[Wed Jun  5 09:41:48 2013] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 09:41:48 2013] Initial guess for spatial extent in simple fitting = 10.84"
[Wed Jun  5 09:41:48 2013] source mask rpix=2.5, npix_max = 35, mask sum = 24, frac = 0.670
[Wed Jun  5 09:41:48 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.84"
[Wed Jun  5 12:01:17 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jun  5 12:01:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src28.csv
[Wed Jun  5 12:01:17 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jun  5 12:01:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src28.csv
[Wed Jun  5 12:01:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 12:01:18 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jun  5 12:01:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun  5 12:01:18 2013] fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jun  5 12:01:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Jun  5 12:01:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0701981601_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 13:38:19 2013] Source 41 is offset by -5.246235 and 2.701183 pixels which is larger than
2 X fitted extent = 4.710759 x 9.967908, not incorporating fit results
[Wed Jun  5 13:38:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 13:38:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 13:38:19 2013] Assessing source extent using major
[Wed Jun  5 13:38:19 2013] Source does appear to be extended
[Wed Jun  5 13:38:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 13:38:19 2013] Deleting source due to low Poisson probability 0.9