[Sun Jun  9 01:18:32 2013] Detection parameters:
  Position = (266.6, 135.0) = 4 14 47.83 -59 0 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.1 +/- 12.7
  Background counts = 26.2
  Rate = 0.001 +/- 0.0002

[Sun Jun  9 01:18:32 2013] Off-axis axis estimate = 12.07'
[Sun Jun  9 04:13:37 2013] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:13:37 2013] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Jun  9 04:13:37 2013] source mask rpix=2.9, npix_max = 45, mask sum = 38, frac = 0.839
[Sun Jun  9 04:13:37 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 12.47"
[Sun Jun  9 05:27:33 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jun  9 05:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src38.csv
[Sun Jun  9 05:27:33 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jun  9 05:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src38.csv
[Sun Jun  9 05:27:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:27:34 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jun  9 05:27:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun Jun  9 05:27:34 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jun  9 05:27:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun Jun  9 05:27:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:28:00 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 15.756979 pixels away
[Sun Jun  9 05:28:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:28:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:28:00 2013] Assessing source extent using major
[Sun Jun  9 05:28:00 2013] Source does appear to be extended
[Sun Jun  9 05:28:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 08:09:17 2013] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 08:09:17 2013] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Jun  9 08:09:17 2013] source mask rpix=2.9, npix_max = 45, mask sum = 38, frac = 0.839
[Sun Jun  9 08:09:17 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 12.47"
[Sun Jun  9 09:07:09 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_src36.ximg exists
[Sun Jun  9 09:07:09 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun Jun  9 09:07:09 2013] Fit fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_src36 appears to have run properly
[Sun Jun  9 09:07:10 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun Jun  9 09:07:10 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Jun  9 09:07:10 2013] Fit fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Sun Jun  9 09:07:34 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 15.079128 pixels away
[Sun Jun  9 09:07:34 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:07:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:07:34 2013] Assessing source extent using major
[Sun Jun  9 09:07:34 2013] Source does appear to be extended
[Sun Jun  9 09:07:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 11:21:47 2013] XMMSAS src. selection expression = ellipse(23144.386292, 11694.837952, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 11:21:47 2013] Writing source region out to fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46_src.reg
[Sun Jun  9 11:21:47 2013] Extracting stamp from image fullrun_mos2_xmm0700382001_pi300-10000_cl_sm2.00.img.gz, (229, 97) - (304, 172)
[Sun Jun  9 11:21:47 2013] XMMSAS bgd. selection expression = annulus(23144.386292, 11694.837952, 1087.500000, 2175.000000, X, Y) && !ellipse(20504.781000, 11677.986740, 587.258417, 362.765610, 25.157074, X, Y) && !ellipse(25883.630000, 14703.988000, 1753.136050, 1753.136050, 0.000000, X, Y) && !ellipse(24008.376800, 12297.002580, 154.552004, 154.552004, 0.000000, X, Y)
[Sun Jun  9 11:21:47 2013] Writing fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46.gif
[Sun Jun  9 11:34:02 2013] Mean detx,y = (-12773.47, 2303.95) 
[Sun Jun  9 11:34:03 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 11:34:13 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 11:34:13 2013] Setting source spectrum file to fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sun Jun  9 11:34:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sun Jun  9 12:06:25 2013] Not generating rmf since there are only 81 counts
[Sun Jun  9 12:06:25 2013] rmf not generated due to insufficient counts
[Sun Jun  9 12:10:19 2013] Updating aperture counts using extracted products
[Sun Jun  9 12:10:19 2013] Total counts from fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 155.00
[Sun Jun  9 12:10:19 2013] Total counts from fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46_bgd.pi.gz = 946.00
[Sun Jun  9 12:10:19 2013] Got source and background scale factors 1215740.000000, 10417352.000000
[Sun Jun  9 12:10:19 2013] User source parameters:
  Position = (266.6, 135.0) = 4 14 47.83 -59 0 7.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 44.6 +/- 13.5
  Background aperture counts = 110.4
  Rate = 0.0008 +/- 0.0002

[Sun Jun  9 12:10:19 2013] Updating counts from extracted products
[Sun Jun  9 12:10:19 2013] Set source signif. to 44.60/10.51 = 4.24
[Sun Jun  9 12:10:20 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 12:10:20 2013] Using photon index=1.80, rate=0.00082, arf fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46.arf
[Sun Jun  9 12:10:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 12:10:21 2013] Updating source flux to 1.7e-14
[Sun Jun  9 12:10:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 12:10:29 2013] xmm0700382001/analysis//spectral/fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete