[Sun Jun  9 01:18:32 2013] Detection parameters:
  Position = (292.9, 173.6) = 4 14 33.01 -58 57 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.0 +/- 11.6
  Background counts = 28.3
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 01:18:32 2013] Off-axis axis estimate = 9.06'
[Sun Jun  9 04:13:37 2013] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:13:37 2013] Initial guess for spatial extent in simple fitting = 10.96"
[Sun Jun  9 04:13:37 2013] source mask rpix=2.5, npix_max = 36, mask sum = 24, frac = 0.658
[Sun Jun  9 04:13:37 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 10.96"
[Sun Jun  9 05:27:33 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src22.ximg exists
[Sun Jun  9 05:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src22.csv
[Sun Jun  9 05:27:33 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Jun  9 05:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src22.csv
[Sun Jun  9 05:27:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:27:33 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Jun  9 05:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun  9 05:27:33 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Jun  9 05:27:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun  9 05:27:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700382001_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:28:00 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 10.251436 pixels away
[Sun Jun  9 05:28:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:28:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:28:00 2013] Assessing source extent using major
[Sun Jun  9 05:28:00 2013] Source does appear to be extended
[Sun Jun  9 05:28:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 08:09:17 2013] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 08:09:17 2013] Initial guess for spatial extent in simple fitting = 10.96"
[Sun Jun  9 08:09:17 2013] source mask rpix=2.5, npix_max = 36, mask sum = 24, frac = 0.658
[Sun Jun  9 08:09:17 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 10.96"
[Sun Jun  9 09:07:09 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jun  9 09:07:09 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jun  9 09:07:09 2013] Fit fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Jun  9 09:07:10 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jun  9 09:07:10 2013] fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jun  9 09:07:10 2013] Fit fullrun_mos2_xmm0700382001_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jun  9 09:07:34 2013] Spatial fit model total counts = 280.958000, observed total counts = 259.000000
[Sun Jun  9 09:07:34 2013] Offset between fit and detection position for source 40 = 6.570100 pixels
[Sun Jun  9 09:07:34 2013] 277.579000 total counts/ 111.723000 bgd. counts: snr = 15.691335
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 6.570100 pixels
  Position = (298.1, 169.6) = 4 14 30.11 -58 57 36.1
  Extent = 21.9 (21.9-43.8)", rotation angle = 0
  Source counts = 165.9 +/- 16.7
  Background counts = 111.7
  Rate = 0.003 +/- 0.0003
[Sun Jun  9 09:07:34 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 09:07:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 09:07:34 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 09:07:34 2013] Source does appear to be extended
[Sun Jun  9 09:07:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 11:21:46 2013] XMMSAS src. selection expression = ellipse(25883.630000, 14703.988000, 1314.852038, 1314.852038, 0.000000, X, Y)
[Sun Jun  9 11:21:46 2013] Writing source region out to fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40_src.reg
[Sun Jun  9 11:21:46 2013] Extracting stamp from image fullrun_mos2_xmm0700382001_pi300-10000_cl_sm2.00.img.gz, (223, 94) - (374, 245)
[Sun Jun  9 11:21:46 2013] XMMSAS bgd. selection expression = annulus(25883.630000, 14703.988000, 2191.420063, 4382.840126, X, Y) && !ellipse(21285.501640, 15205.862600, 573.762417, 419.538412, 14.822424, X, Y) && !ellipse(29301.359406, 16155.435852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.339900, 15346.992200, 429.791212, 218.100006, 6.288360, X, Y) && !ellipse(24100.526062, 19403.333191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.420715, 17734.604797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24008.376800, 12297.002580, 154.552004, 154.552004, 0.000000, X, Y) && !ellipse(23144.386292, 11694.837952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30080.114014, 12674.084442, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 11:21:46 2013] Writing fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40.gif
[Sun Jun  9 11:28:55 2013] Mean detx,y = (-8815.34, 3355.09) 
[Sun Jun  9 11:28:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 11:29:48 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 11:29:48 2013] Setting source spectrum file to fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Jun  9 11:29:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Jun  9 12:10:16 2013] Updating aperture counts using extracted products
[Sun Jun  9 12:10:16 2013] Total counts from fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 593.00
[Sun Jun  9 12:10:16 2013] Total counts from fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40_bgd.pi.gz = 3398.00
[Sun Jun  9 12:10:16 2013] Got source and background scale factors 5207196.000000, 36512361.000000
[Sun Jun  9 12:10:17 2013] User source parameters:
  Position = (298.1, 169.6) = 4 14 30.11 -58 57 36.1
  Extent = 21.9 (21.9-43.8)", rotation angle = 0
  Source aperture counts = 108.4 +/- 25.4
  Background aperture counts = 484.6
  Rate = 0.002 +/- 0.0005

[Sun Jun  9 12:10:20 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 12:10:20 2013] Using photon index=1.80, rate=0.00305, arf fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40.arf
[Sun Jun  9 12:10:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 12:10:20 2013] Updating source flux to 4.4e-14
[Sun Jun  9 12:10:29 2013] xmm0700382001/analysis//spectral/fullrun_mos2_xmm0700382001_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete