[Mon Jun  3 19:41:05 2013] Detection parameters:
  Position = (381.5, 433.8) = 22 22 47.65 -28 47 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.8 +/- 11.4
  Background counts = 7.7
  Rate = 0.008 +/- 0.001

[Mon Jun  3 19:41:06 2013] Off-axis axis estimate = 11.52'
[Mon Jun  3 19:42:39 2013] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 19:42:39 2013] Initial guess for spatial extent in simple fitting = 12.19"
[Mon Jun  3 19:42:39 2013] source mask rpix=2.8, npix_max = 43, mask sum = 37, frac = 0.849
[Mon Jun  3 19:42:39 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.19"
[Mon Jun  3 20:29:24 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun  3 20:29:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_src5.csv
[Mon Jun  3 20:29:24 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun  3 20:29:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_src5.csv
[Mon Jun  3 20:29:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 20:29:24 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun  3 20:29:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun  3 20:29:24 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun  3 20:29:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun  3 20:29:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381701_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 21:01:59 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.744672 pixels away
[Mon Jun  3 21:01:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 21:01:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 21:01:59 2013] Assessing source extent using major
[Mon Jun  3 21:01:59 2013] Source does appear to be extended
[Mon Jun  3 21:01:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 21:02:15 2013] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 21:02:15 2013] Initial guess for spatial extent in simple fitting = 12.19"
[Mon Jun  3 21:02:15 2013] source mask rpix=2.8, npix_max = 43, mask sum = 37, frac = 0.849
[Mon Jun  3 21:02:15 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.19"
[Mon Jun  3 21:44:37 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun  3 21:44:37 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun  3 21:44:37 2013] Fit fullrun_pn_xmm0700381701_pi300-10000_cl_pass1_src5 appears to have run properly
[Mon Jun  3 21:44:38 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun  3 21:44:38 2013] fullrun_pn_xmm0700381701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun  3 21:44:38 2013] Fit fullrun_pn_xmm0700381701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun  3 22:21:25 2013] Spatial fit model total counts = 149.268000, observed total counts = 138.000000
[Mon Jun  3 22:21:25 2013] Offset between fit and detection position for source 5 = 0.390228 pixels
[Mon Jun  3 22:21:25 2013] 150.455800 total counts/ 104.951000 bgd. counts: snr = 4.441850
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.390228 pixels
  Position = (381.9, 433.8) = 22 22 47.52 -28 47 53.6
  Extent = 5.3 (3.7-6.9)", rotation angle = 0
  Source counts = 45.5 +/- 12.3
  Background counts = 105.0
  Rate = 0.005 +/- 0.001
[Mon Jun  3 22:21:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 22:21:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 22:21:25 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 22:21:25 2013] Source does appear to be extended
[Mon Jun  3 22:21:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 22:21:43 2013] XMMSAS src. selection expression = ellipse(33176.105000, 37688.274800, 317.832609, 317.832609, 0.000000, X, Y)
[Mon Jun  3 22:21:43 2013] Writing source region out to fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun  3 22:21:43 2013] Extracting stamp from image fullrun_pn_xmm0700381701_pi300-10000_cl_sm2.00.img.gz, (364, 415) - (400, 452)
[Mon Jun  3 22:21:43 2013] XMMSAS bgd. selection expression = annulus(33176.105000, 37688.274800, 529.721015, 1059.442030, X, Y) && !ellipse(34702.020874, 39505.765381, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 22:21:43 2013] Writing fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5.gif
[Mon Jun  3 22:25:02 2013] Mean detx,y = (-60.51, -12324.15) 
[Mon Jun  3 22:25:06 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 22:25:23 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 22:25:23 2013] Setting source spectrum file to fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun  3 22:25:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun  3 22:37:45 2013] Not generating rmf since there are only 45 counts
[Mon Jun  3 22:37:45 2013] rmf not generated due to insufficient counts
[Mon Jun  3 22:54:40 2013] Updating aperture counts using extracted products
[Mon Jun  3 22:54:40 2013] Total counts from fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 59.00
[Mon Jun  3 22:54:41 2013] Total counts from fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5_bgd.pi.gz = 97.00
[Mon Jun  3 22:54:41 2013] Got source and background scale factors 224462.000000, 2172634.000000
[Mon Jun  3 22:54:41 2013] User source parameters:
  Position = (381.9, 433.8) = 22 22 47.52 -28 47 53.6
  Extent = 5.3 (3.7-6.9)", rotation angle = 0
  Source aperture counts = 49.0 +/- 8.7
  Background aperture counts = 10.0
  Rate = 0.005 +/- 0.001

[Mon Jun  3 22:54:46 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 22:54:46 2013] Using photon index=1.80, rate=0.00504, arf fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5.arf
[Mon Jun  3 22:54:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 22:54:46 2013] Updating source flux to 4e-13
[Mon Jun  3 22:54:56 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun  3 22:54:58 2013] xmm0700381701/analysis//spectral/fullrun_pn_xmm0700381701_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete