[Mon Jun 10 01:11:42 2013] Detection parameters:
  Position = (200.0, 380.2) = 16 45 54.60 57 40 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.1 +/- 14.4
  Background counts = 42.2
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 01:11:43 2013] Off-axis axis estimate = 9.28'
[Mon Jun 10 01:15:27 2013] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 01:15:27 2013] Initial guess for spatial extent in simple fitting = 11.07"
[Mon Jun 10 01:15:27 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.971
[Mon Jun 10 01:15:27 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 11.07"
[Mon Jun 10 02:41:24 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_src32.ximg exists
[Mon Jun 10 02:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_src32.csv
[Mon Jun 10 02:41:24 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon Jun 10 02:41:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_src32.csv
[Mon Jun 10 02:41:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:41:25 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon Jun 10 02:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon Jun 10 02:41:25 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon Jun 10 02:41:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon Jun 10 02:41:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 03:11:47 2013] Warning, spatial fit 32 centroid is now closest to src. 6
[Mon Jun 10 03:11:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 03:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 03:11:47 2013] Assessing source extent using major
[Mon Jun 10 03:11:47 2013] Source does appear to be extended
[Mon Jun 10 03:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 03:12:07 2013] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 03:12:07 2013] Initial guess for spatial extent in simple fitting = 11.07"
[Mon Jun 10 03:12:07 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.971
[Mon Jun 10 03:12:07 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 11.07"
[Mon Jun 10 04:24:27 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_src32.ximg exists
[Mon Jun 10 04:24:27 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon Jun 10 04:24:27 2013] Fit fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_src32 appears to have run properly
[Mon Jun 10 04:24:27 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon Jun 10 04:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon Jun 10 04:24:27 2013] fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Jun 10 04:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon Jun 10 04:24:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 04:48:53 2013] Spatial fit model total counts = 544.089000, observed total counts = 498.000000
[Mon Jun 10 04:48:53 2013] Offset between fit and detection position for source 33 = 1.186398 pixels
[Mon Jun 10 04:48:53 2013] 538.763200 total counts/ 441.588000 bgd. counts: snr = 4.624309
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.186398 pixels
  Position = (200.0, 381.4) = 16 45 54.63 57 40 23.0
  Extent = 17.0 (8.5-22.1)" x 9.8 (4.6-22.1)", rotation angle = 213 (318-0) degrees
  Source counts = 97.2 +/- 23.2
  Background counts = 441.6
  Rate = 0.003 +/- 0.0008
[Mon Jun 10 04:48:53 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 04:48:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 04:48:53 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 04:48:53 2013] Source does appear to be extended
[Mon Jun 10 04:48:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.39
[Mon Jun 10 04:49:06 2013] XMMSAS src. selection expression = ellipse(17350.647716, 33131.957200, 1022.808029, 585.346817, 213.427000, X, Y)
[Mon Jun 10 04:49:06 2013] Writing source region out to fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33_src.reg
[Mon Jun 10 04:49:06 2013] Extracting stamp from image fullrun_pn_xmm0700381601_pi300-10000_cl_sm2.00.img.gz, (141, 323) - (259, 440)
[Mon Jun 10 04:49:06 2013] XMMSAS bgd. selection expression = annulus(17350.647716, 33131.957200, 1704.680049, 3409.360098, X, Y) && !ellipse(18498.039886, 33372.114044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13967.249649, 31695.625000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19140.521133, 32038.370697, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:49:06 2013] Writing fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33.gif
[Mon Jun 10 05:12:30 2013] Mean detx,y = (-12098.36, -510.55) 
[Mon Jun 10 05:12:33 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 05:13:05 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 05:13:05 2013] Setting source spectrum file to fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Jun 10 05:13:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon Jun 10 05:36:28 2013] Not generating rmf since there are only 97 counts
[Mon Jun 10 05:36:28 2013] rmf not generated due to insufficient counts
[Mon Jun 10 05:50:48 2013] Updating aperture counts using extracted products
[Mon Jun 10 05:50:48 2013] Total counts from fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 483.00
[Mon Jun 10 05:50:48 2013] Total counts from fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33_bgd.pi.gz = 3699.00
[Mon Jun 10 05:50:48 2013] Got source and background scale factors 1637953.000000, 22732425.000000
[Mon Jun 10 05:50:48 2013] User source parameters:
  Position = (200.0, 381.4) = 16 45 54.63 57 40 23.0
  Extent = 17.0 (8.5-22.1)" x 9.8 (4.6-22.1)", rotation angle = 213 (318-0) degrees
  Source aperture counts = 216.5 +/- 23.0
  Background aperture counts = 266.5
  Rate = 0.007 +/- 0.0008

[Mon Jun 10 05:50:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 05:50:52 2013] Using photon index=1.80, rate=0.00327, arf fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33.arf
[Mon Jun 10 05:50:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 05:50:52 2013] Updating source flux to 1.9e-14
[Mon Jun 10 05:50:58 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 05:51:00 2013] xmm0700381601/analysis//spectral/fullrun_pn_xmm0700381601_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete