[Mon Jun 10 01:12:33 2013] Detection parameters:
  Position = (140.2, 244.8) = 16 46 26.67 57 30 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.2 +/- 14.8
  Background counts = 32.6
  Rate = 0.003 +/- 0.0004

[Mon Jun 10 01:12:34 2013] Off-axis axis estimate = 12.11'
[Mon Jun 10 02:50:39 2013] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 02:50:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 02:50:39 2013] Initial guess for spatial extent in simple fitting = 12.49"
[Mon Jun 10 02:50:39 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.079
[Mon Jun 10 02:50:39 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.49"
[Mon Jun 10 03:11:32 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jun 10 03:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_src8.csv
[Mon Jun 10 03:11:32 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jun 10 03:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_src8.csv
[Mon Jun 10 03:11:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 03:11:32 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jun 10 03:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon Jun 10 03:11:32 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jun 10 03:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon Jun 10 03:11:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 03:11:53 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.239301 pixels away
[Mon Jun 10 03:11:53 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 03:11:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 03:11:53 2013] Assessing source extent using major
[Mon Jun 10 03:11:53 2013] Source does appear to be extended
[Mon Jun 10 03:11:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:31:29 2013] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 04:31:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 04:31:29 2013] Initial guess for spatial extent in simple fitting = 12.49"
[Mon Jun 10 04:31:29 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.079
[Mon Jun 10 04:31:29 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 12.49"
[Mon Jun 10 04:48:44 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass1_src8.ximg exists
[Mon Jun 10 04:48:44 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Jun 10 04:48:44 2013] Fit fullrun_mos2_xmm0700381601_pi300-10000_cl_pass1_src8 appears to have run properly
[Mon Jun 10 04:48:44 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Jun 10 04:48:44 2013] fullrun_mos2_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jun 10 04:48:44 2013] Fit fullrun_mos2_xmm0700381601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Jun 10 04:48:57 2013] Spatial fit model total counts = 141.108000, observed total counts = 131.000000
[Mon Jun 10 04:48:57 2013] Offset between fit and detection position for source 1 = 0.547364 pixels
[Mon Jun 10 04:48:57 2013] 141.291200 total counts/ 90.913800 bgd. counts: snr = 5.283489
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.547364 pixels
  Position = (140.2, 244.3) = 16 46 26.65 57 30 25.6
  Extent = 7.8 (5.3-10.7)" x 3.5 (3.1-5.2)", rotation angle = 77 (58-95) degrees
  Source counts = 50.4 +/- 11.9
  Background counts = 90.9
  Rate = 0.002 +/- 0.0004
[Mon Jun 10 04:48:57 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 04:48:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 04:48:57 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 04:48:57 2013] Source does appear to be extended
[Mon Jun 10 04:48:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Mon Jun 10 05:41:09 2013] XMMSAS src. selection expression = ellipse(12150.723400, 21205.419200, 468.130813, 209.565606, 77.437702, X, Y)
[Mon Jun 10 05:41:09 2013] Writing source region out to fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 05:41:09 2013] Extracting stamp from image fullrun_mos2_xmm0700381601_pi300-10000_cl_sm2.00.img.gz, (113, 217) - (167, 271)
[Mon Jun 10 05:41:09 2013] XMMSAS bgd. selection expression = annulus(12150.723400, 21205.419200, 780.218022, 1560.436045, X, Y)
[Mon Jun 10 05:41:09 2013] Writing fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 05:43:46 2013] Mean detx,y = (10758.15, -12610.35) 
[Mon Jun 10 05:43:48 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 05:44:01 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 05:44:01 2013] Setting source spectrum file to fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 05:44:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 05:49:31 2013] Not generating rmf since there are only 50 counts
[Mon Jun 10 05:49:31 2013] rmf not generated due to insufficient counts
[Mon Jun 10 05:50:54 2013] Updating aperture counts using extracted products
[Mon Jun 10 05:50:54 2013] Total counts from fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 62.00
[Mon Jun 10 05:50:54 2013] Total counts from fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 143.00
[Mon Jun 10 05:50:54 2013] Got source and background scale factors 308800.000000, 3849781.000000
[Mon Jun 10 05:50:54 2013] User source parameters:
  Position = (140.2, 244.3) = 16 46 26.65 57 30 25.6
  Extent = 7.8 (5.3-10.7)" x 3.5 (3.1-5.2)", rotation angle = 77 (58-95) degrees
  Source aperture counts = 50.5 +/- 8.9
  Background aperture counts = 11.5
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 05:50:55 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 05:50:55 2013] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 05:50:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 05:50:55 2013] Updating source flux to 6.1e-14
[Mon Jun 10 05:50:57 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 05:50:58 2013] xmm0700381601/analysis//spectral/fullrun_mos2_xmm0700381601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete