[Wed May 29 06:52:04 2013] Detection parameters:
  Position = (497.3, 352.0) = 17 8 0.42 -36 22 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 579.5 +/- 32.5
  Background counts = 62.8
  Rate = 0.01 +/- 0.0007

[Wed May 29 06:52:07 2013] Off-axis axis estimate = 14.93'
[Wed May 29 08:34:23 2013] Using EEF radius (= 13.90 ")to estimate initial spatial extent for simple fitting
[Wed May 29 08:34:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 08:34:23 2013] Initial guess for spatial extent in simple fitting = 13.90"
[Wed May 29 08:34:23 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.026
[Wed May 29 08:34:23 2013] Giving source the simple spatial ID 98 for pass 0, mean size = 13.90"
[Wed May 29 18:00:23 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src98.ximg exists
[Wed May 29 18:00:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src98.csv
[Wed May 29 18:00:23 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src98_1.ximg exists
[Wed May 29 18:00:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src98.csv
[Wed May 29 18:00:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 18:00:26 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Wed May 29 18:00:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src98.csv
[Wed May 29 18:00:26 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Wed May 29 18:00:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src98.csv
[Wed May 29 18:00:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 18:00:56 2013] Source 36 is offset by -2.340373 and -4.098315 pixels which is larger than
2 X fitted extent = 1.593453 x 1.593453, not incorporating fit results
[Wed May 29 18:00:56 2013] Warning, spatial fit 98 centroid is now closest to src. 35
[Wed May 29 18:00:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 18:00:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 18:00:56 2013] Assessing source extent using major
[Wed May 29 18:00:56 2013] Source does appear to be extended
[Wed May 29 18:00:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 18:00:56 2013] Source is confused with source 105
[Wed May 29 19:41:38 2013] Using EEF radius (= 13.90 ")to estimate initial spatial extent for simple fitting
[Wed May 29 19:41:38 2013] Initial guess for spatial extent in simple fitting = 13.90"
[Wed May 29 19:41:38 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.026
[Wed May 29 19:41:38 2013] Giving source the simple spatial ID 94 for pass 1, mean size = 13.90"
[Thu May 30 08:15:47 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src94.ximg exists
[Thu May 30 08:15:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src94.csv
[Thu May 30 08:15:47 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src94_1.ximg exists
[Thu May 30 08:15:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src94.csv
[Thu May 30 08:15:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 08:15:51 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Thu May 30 08:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src94.csv
[Thu May 30 08:15:51 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Thu May 30 08:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src94.csv
[Thu May 30 08:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 08:16:33 2013] Spatial fit model total counts = 2161.700000, observed total counts = 2005.000000
[Thu May 30 08:16:33 2013] Offset between fit and detection position for source 36 = 1.841998 pixels
[Thu May 30 08:16:33 2013] Warning, changing simple spatial fit ID from 94 to 90
[Thu May 30 08:16:33 2013] 2202.708800 total counts/ 2120.530000 bgd. counts: snr = 1.784586
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.841998 pixels
  Position = (498.7, 353.3) = 17 7 59.95 -36 21 53.6
  Extent = 13.2 (10.2-18.3)", rotation angle = 113 (97-129) degrees
  Source counts = 82.2 +/- 46.9
  Background counts = 2120.5
  Rate = 0.002 +/- 0.001
[Thu May 30 08:16:33 2013] Vigneting correction estimate = 1.000000
[Thu May 30 08:16:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 08:16:33 2013] Assessing source extent using major axis lower bound
[Thu May 30 08:16:33 2013] Source does appear to be extended
[Thu May 30 08:16:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.52
[Thu May 30 08:16:33 2013] Source is asymmetric
[Thu May 30 09:48:23 2013] XMMSAS src. selection expression = ellipse(43334.124000, 30686.438000, 789.972023, 207.945606, 113.106200, X, Y)
[Thu May 30 09:48:23 2013] Writing source region out to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36_src.reg
[Thu May 30 09:48:23 2013] Extracting stamp from image fullrun_mos2_xmm0700381301_pi300-10000_cl_sm2.00.img.gz, (453, 308) - (544, 399)
[Thu May 30 09:48:23 2013] XMMSAS bgd. selection expression = annulus(43334.124000, 30686.438000, 1316.620038, 2633.240076, X, Y) && !ellipse(38877.666000, 29948.275400, 3890.320112, 486.289614, 108.778600, X, Y) && !ellipse(41183.048279, 30058.772888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41260.848602, 27440.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40828.340400, 25902.082200, 2273.600065, 284.200008, 81.378470, X, Y) && !ellipse(39770.186000, 30096.194000, 1945.160056, 1945.160056, 0.000000, X, Y) && !ellipse(41291.032760, 27739.019000, 2322.328067, 290.290408, 97.472090, X, Y) && !ellipse(41424.703735, 28401.792999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42791.762390, 31708.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41762.641174, 31447.281525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40862.456146, 29176.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42787.944458, 32905.808594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42997.859039, 30142.329315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43138.822510, 32056.578888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42317.693634, 32411.043884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43718.821625, 31370.328156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42018.530243, 31878.729095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40328.665161, 32305.769318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40987.595642, 33261.425873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40714.207275, 32834.096252, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:48:23 2013] Writing fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36.gif
[Thu May 30 14:18:40 2013] Mean detx,y = (-16739.96, 308.88) 
[Thu May 30 14:18:41 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 14:18:55 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 14:18:55 2013] Setting source spectrum file to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu May 30 14:18:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu May 30 18:12:05 2013] Not generating rmf since there are only 82 counts
[Thu May 30 18:12:05 2013] rmf not generated due to insufficient counts
[Thu May 30 18:36:34 2013] Updating aperture counts using extracted products
[Thu May 30 18:36:34 2013] Total counts from fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 353.00
[Thu May 30 18:36:34 2013] Total counts from fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36_bgd.pi.gz = 433.00
[Thu May 30 18:36:34 2013] Got source and background scale factors 469032.000000, 2258960.000000
[Thu May 30 18:36:34 2013] User source parameters:
  Position = (498.7, 353.3) = 17 7 59.95 -36 21 53.6
  Extent = 13.2 (10.2-18.3)", rotation angle = 113 (97-129) degrees
  Source aperture counts = 263.1 +/- 19.8
  Background aperture counts = 89.9
  Rate = 0.006 +/- 0.0005

[Thu May 30 18:37:00 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 18:37:00 2013] Using photon index=1.80, rate=0.00191, arf fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36.arf
[Thu May 30 18:37:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 18:37:00 2013] Updating source flux to 8.9e-14
[Thu May 30 18:37:22 2013] Flag b found in src. 36 procflags, skipping spectral fitting
[Thu May 30 18:37:22 2013] Flag c found in src. 36 procflags, skipping spectral fitting
[Thu May 30 18:37:22 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 18:38:15 2013] xmm0700381301/analysis//spectral/fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete