[Wed May 29 06:52:06 2013] Detection parameters:
  Position = (378.0, 193.1) = 17 8 43.31 -36 33 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 597.3 +/- 34.2
  Background counts = 70.2
  Rate = 0.02 +/- 0.001

[Wed May 29 06:52:07 2013] Off-axis axis estimate = 9.57'
[Wed May 29 08:34:23 2013] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Wed May 29 08:34:23 2013] Initial guess for spatial extent in simple fitting = 11.22"
[Wed May 29 08:34:23 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Wed May 29 08:34:23 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 11.22"
[Wed May 29 18:00:21 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src29.ximg exists
[Wed May 29 18:00:21 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed May 29 18:00:21 2013] Fit fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src29 appears to have run properly
[Wed May 29 18:00:24 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed May 29 18:00:24 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed May 29 18:00:24 2013] Fit fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed May 29 18:00:55 2013] Spatial fit model total counts = 1764.130000, observed total counts = 1767.000000
[Wed May 29 18:00:55 2013] Offset between fit and detection position for source 148 = 1.225374 pixels
[Wed May 29 18:00:55 2013] 1596.033000 total counts/ 560.353000 bgd. counts: snr = 43.751681
Spatial fit parameters:
  Offset between fit and detection position for source 148 = 1.225374 pixels
  Position = (378.9, 192.2) = 17 8 43.00 -36 33 35.4
  Extent = 22.4 (22.3-44.9)", rotation angle = 47 (46-47) degrees
  Source counts = 1035.7 +/- 40.0
  Background counts = 560.4
  Rate = 0.02 +/- 0.0009
[Wed May 29 18:00:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 18:00:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 18:00:56 2013] Assessing source extent using major axis lower bound
[Wed May 29 18:00:56 2013] Source does appear to be extended
[Wed May 29 18:00:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.89
[Wed May 29 18:00:56 2013] Source is asymmetric
[Wed May 29 18:00:56 2013] Source is confused with source 152
[Wed May 29 19:41:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 19:41:38 2013] Initial guess for spatial extent in simple fitting = 12.62"
[Wed May 29 19:41:38 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Wed May 29 19:41:38 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 12.62"
[Thu May 30 08:15:45 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src29.ximg exists
[Thu May 30 08:15:45 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu May 30 08:15:45 2013] Fit fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src29 appears to have run properly
[Thu May 30 08:15:49 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu May 30 08:15:49 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu May 30 08:15:49 2013] Fit fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Thu May 30 08:16:32 2013] Spatial fit model total counts = 1856.230000, observed total counts = 1864.000000
[Thu May 30 08:16:32 2013] Offset between fit and detection position for source 148 = 0.406853 pixels
[Thu May 30 08:16:32 2013] 1690.462000 total counts/ 577.522000 bgd. counts: snr = 46.311355
Spatial fit parameters:
  Offset between fit and detection position for source 148 = 0.406853 pixels
  Position = (379.2, 191.9) = 17 8 42.89 -36 33 36.5
  Extent = 25.2 (25.0-50.5)", rotation angle = 47 (46-47) degrees
  Source counts = 1112.9 +/- 41.1
  Background counts = 577.5
  Rate = 0.03 +/- 0.001
[Thu May 30 08:16:33 2013] Vigneting correction estimate = 1.000000
[Thu May 30 08:16:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 08:16:33 2013] Assessing source extent using major axis lower bound
[Thu May 30 08:16:33 2013] Source does appear to be extended
[Thu May 30 08:16:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.89
[Thu May 30 08:16:33 2013] Source is asymmetric
[Thu May 30 09:48:06 2013] Counts = 1112.940000, rescaling region sizes by 2.000000
[Thu May 30 09:48:06 2013] XMMSAS src. selection expression = ellipse(32942.198200, 16650.150600, 3028.128087, 378.516011, 46.531200, X, Y)
[Thu May 30 09:48:06 2013] Writing source region out to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148_src.reg
[Thu May 30 09:48:06 2013] Extracting stamp from image fullrun_mos2_xmm0700381301_pi300-10000_cl_sm2.00.img.gz, (205, 18) - (553, 366)
[Thu May 30 09:48:06 2013] XMMSAS bgd. selection expression = annulus(32942.198200, 16650.150600, 10093.760290, 20187.520581, X, Y) && !ellipse(38340.279200, 26850.715200, 2127.784061, 265.972808, 90.180979, X, Y) && !ellipse(36071.232758, 17963.010330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38412.890000, 28039.420200, 2147.216062, 268.402408, 97.170940, X, Y) && !ellipse(38877.666000, 29948.275400, 3890.320112, 486.289614, 108.778600, X, Y) && !ellipse(38371.239800, 27643.392600, 2099.792060, 262.473608, 94.928690, X, Y) && !ellipse(37317.049200, 32941.800800, 2223.272064, 315.337609, 125.095500, X, Y) && !ellipse(33766.423400, 33511.537000, 1751.536050, 234.026407, 120.630700, X, Y) && !ellipse(38500.483673, 24660.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35292.268402, 17963.428497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34001.633800, 33899.636000, 2009.616058, 251.202407, 121.940000, X, Y) && !ellipse(38370.779040, 25783.545200, 1858.984053, 268.272808, 87.431600, X, Y) && !ellipse(38675.601440, 23876.170776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36695.653168, 13799.669510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.090271, 34236.936737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36538.248860, 17426.748200, 1941.000056, 281.744008, 47.937700, X, Y) && !ellipse(34294.917267, 16469.428909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39194.102800, 17712.340800, 2069.288060, 576.362417, 45.561000, X, Y) && !ellipse(33615.731567, 15966.392456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36625.504639, 21781.610199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37525.263000, 16451.759000, 2523.896073, 439.614413, 41.642800, X, Y) && !ellipse(33857.233032, 21366.691513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38688.332306, 15516.801743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33454.348267, 31005.404999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40055.590088, 16940.675369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35713.088000, 23698.668000, 1727.688050, 933.176027, 68.178000, X, Y) && !ellipse(37454.319824, 21701.642044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38762.464000, 18157.271400, 2650.880076, 620.297618, 47.746000, X, Y) && !ellipse(35489.014600, 27540.611400, 1553.576045, 194.197606, 93.710410, X, Y) && !ellipse(39304.001740, 31091.090759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33723.315000, 17240.493400, 2030.416058, 253.802407, 54.301100, X, Y) && !ellipse(35779.938873, 22842.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36815.202200, 23364.719200, 1778.344051, 222.292806, 73.458700, X, Y) && !ellipse(35468.736000, 26921.540084, 1667.904048, 208.488806, 90.534948, X, Y) && !ellipse(35620.070000, 25021.606000, 1945.280056, 243.160007, 79.819000, X, Y) && !ellipse(41183.048279, 30058.772888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36422.377840, 25205.680000, 1729.136050, 216.141606, 82.929020, X, Y) && !ellipse(33184.087524, 21354.982834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41260.848602, 27440.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36585.089340, 24269.937400, 1749.704050, 218.713606, 77.711800, X, Y) && !ellipse(36165.584534, 21874.622513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36340.006683, 26833.671631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36181.705872, 14070.065659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37251.382660, 22118.948929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36560.230200, 31770.336600, 1831.160053, 228.895207, 116.498900, X, Y) && !ellipse(36745.124329, 32175.088776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.586600, 24719.645800, 1688.408049, 836.728024, 83.481600, X, Y) && !ellipse(38843.494873, 23359.122406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37488.436600, 33175.918000, 2281.832066, 320.193609, 125.882900, X, Y) && !ellipse(36587.225120, 29015.456000, 1770.312051, 391.568011, 90.000000, X, Y) && !ellipse(35592.275000, 25275.385200, 1678.656048, 209.832006, 80.696440, X, Y) && !ellipse(33673.669617, 31633.537140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39339.192000, 22101.262000, 1908.640055, 249.871207, 64.056000, X, Y) && !ellipse(35986.622284, 34062.201294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38597.070800, 18332.911600, 2026.368058, 624.513618, 48.095800, X, Y) && !ellipse(35136.388977, 32054.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32058.525024, 15793.753159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32165.501465, 17528.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.862000, 23815.664000, 1727.688050, 939.344027, 66.814000, X, Y) && !ellipse(33013.494000, 32068.626000, 1671.088048, 208.885606, 292.770300, X, Y) && !ellipse(41042.456512, 24922.955902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41437.708069, 23739.617310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36736.269806, 29522.077301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38948.262329, 28668.347321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40828.340400, 25902.082200, 2273.600065, 284.200008, 81.378470, X, Y) && !ellipse(31430.445800, 16418.692600, 1974.520057, 246.815207, 46.765300, X, Y) && !ellipse(42661.348200, 24512.813400, 2413.040069, 301.630409, 74.772200, X, Y) && !ellipse(41203.993805, 19337.185791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35554.779114, 32842.040100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42848.479126, 23920.963776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35114.779000, 15501.882400, 1962.672056, 245.334407, 47.698500, X, Y) && !ellipse(35748.588287, 14824.642242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39770.186000, 30096.194000, 1945.160056, 1945.160056, 0.000000, X, Y) && !ellipse(34596.661346, 30755.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34473.663400, 30414.914580, 1872.472054, 234.058407, 107.716100, X, Y) && !ellipse(41227.103180, 26929.332336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41213.170200, 24338.319600, 2055.416059, 256.927207, 71.641000, X, Y) && !ellipse(41291.032760, 27739.019000, 2322.328067, 290.290408, 97.472090, X, Y) && !ellipse(35192.178000, 33539.318000, 410.628812, 233.288007, 16.777000, X, Y) && !ellipse(40381.386078, 17879.451248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35691.848000, 24162.076000, 864.064025, 290.906408, 0.950710, X, Y) && !ellipse(34314.266200, 15358.286000, 1937.024056, 242.128807, 40.290000, X, Y) && !ellipse(39468.377258, 18745.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36170.957200, 30968.524400, 441.277613, 224.067206, 293.886800, X, Y) && !ellipse(41424.703735, 28401.792999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33554.148163, 28994.945129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42791.762390, 31708.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37492.706238, 14312.278671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33990.776000, 15640.440180, 1901.352055, 237.668807, 41.880000, X, Y) && !ellipse(42561.733200, 24874.426000, 2135.600061, 266.949608, 77.975000, X, Y) && !ellipse(43334.124000, 30686.438000, 1053.296030, 277.260808, 113.106200, X, Y) && !ellipse(41223.468445, 26488.547028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34841.708400, 14932.332200, 1976.488057, 247.060807, 217.658000, X, Y) && !ellipse(39971.383179, 22132.777649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40882.684814, 25704.564667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37879.485596, 37356.232422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30663.811584, 17276.418427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41762.641174, 31447.281525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37095.277557, 36658.286285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40930.374000, 26636.850000, 1270.488037, 592.689617, 359.383380, X, Y) && !ellipse(39401.369629, 23440.642426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40862.456146, 29176.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36078.510193, 37532.704254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35597.304718, 37111.895386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31466.278259, 21182.690018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39725.819519, 32049.853699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42787.944458, 32905.808594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42997.859039, 30142.329315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35367.195984, 12847.909210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43138.822510, 32056.578888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42317.693634, 32411.043884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.095490, 37345.203430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43718.821625, 31370.328156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29000.406525, 35185.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29259.723236, 35602.107666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42018.530243, 31878.729095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35113.630066, 37702.315491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38692.527252, 33641.819885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40328.665161, 32305.769318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37115.869965, 37548.076874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32569.134949, 37545.243958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.375397, 20758.031357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42387.445000, 25783.324000, 300.318409, 300.318409, 0.000000, X, Y) && !ellipse(32703.476776, 15687.370117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40448.072449, 35555.033997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33731.841309, 29753.279907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34181.656372, 29223.920166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.002655, 33665.306274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42221.509888, 34972.900238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40400.106689, 36290.108063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40987.595642, 33261.425873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37984.863708, 36252.037598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12545.486771, 23949.152222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34195.568726, 12334.324326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40714.207275, 32834.096252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17453.228775, 28225.114075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27863.406158, 14930.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17811.836945, 16296.007706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32644.832489, 17760.690460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33171.157532, 12989.792648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35017.459595, 11768.189774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.985199, 18133.207001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32397.442169, 14636.371460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33163.492462, 14253.104706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35552.453308, 16408.111008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33402.968140, 12243.795792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35366.834900, 16894.038452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34162.946381, 13527.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.843231, 37852.128174, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu May 30 09:48:06 2013] Writing fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148.gif
[Thu May 30 11:45:18 2013] Mean detx,y = (-4342.37, -11836.01) 
[Thu May 30 11:45:21 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 11:51:40 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 11:51:41 2013] Setting source spectrum file to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148_src_b10.pi.gz
[Thu May 30 11:51:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148_bgd.pi.gz
[Thu May 30 18:36:19 2013] Updating aperture counts using extracted products
[Thu May 30 18:36:20 2013] Total counts from fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148_src_b10.pi.gz = 2539.00
[Thu May 30 18:36:20 2013] Total counts from fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148_bgd.pi.gz = 26167.00
[Thu May 30 18:36:20 2013] Got source and background scale factors 3600780.000000, 156437818.000000
[Thu May 30 18:36:20 2013] User source parameters:
  Position = (379.2, 191.9) = 17 8 42.89 -36 33 36.5
  Extent = 25.2 (25.0-50.5)", rotation angle = 47 (46-47) degrees
  Source aperture counts = 1936.7 +/- 51.4
  Background aperture counts = 602.3
  Rate = 0.04 +/- 0.001

[Thu May 30 18:36:57 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 18:36:57 2013] Using photon index=1.80, rate=0.0258, arf fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148.arf
[Thu May 30 18:36:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 18:36:57 2013] Updating source flux to 6.7e-13
[Thu May 30 18:37:22 2013] Flag c found in src. 148 procflags, skipping spectral fitting
[Thu May 30 18:38:15 2013] xmm0700381301/analysis//spectral/fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src148_pl.csv not found, spectral fit skipped or did not complete