[Wed May 29 06:52:06 2013] Detection parameters:
  Position = (428.7, 254.8) = 17 8 25.05 -36 29 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 503.4 +/- 31.2
  Background counts = 75.9
  Rate = 0.02 +/- 0.001

[Wed May 29 06:52:07 2013] Off-axis axis estimate = 9.96'
[Wed May 29 08:34:23 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Wed May 29 08:34:23 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Wed May 29 08:34:23 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Wed May 29 08:34:23 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 11.41"
[Wed May 29 18:00:22 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src44.ximg exists
[Wed May 29 18:00:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src44.csv
[Wed May 29 18:00:22 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed May 29 18:00:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src44.csv
[Wed May 29 18:00:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 18:00:24 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed May 29 18:00:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed May 29 18:00:24 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed May 29 18:00:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed May 29 18:00:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 18:00:55 2013] Warning, spatial fit 44 centroid is now closest to src. 140
[Wed May 29 18:00:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 18:00:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 18:00:56 2013] Assessing source extent using major
[Wed May 29 18:00:56 2013] Source does appear to be extended
[Wed May 29 18:00:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 18:00:56 2013] Source is confused with source 140
[Wed May 29 19:41:38 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Wed May 29 19:41:38 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Wed May 29 19:41:38 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Wed May 29 19:41:38 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 11.41"
[Thu May 30 08:15:45 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src44.ximg exists
[Thu May 30 08:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src44.csv
[Thu May 30 08:15:45 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu May 30 08:15:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src44.csv
[Thu May 30 08:15:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 08:15:50 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu May 30 08:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 30 08:15:50 2013] fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu May 30 08:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 30 08:15:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700381301_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 08:16:32 2013] Source 138 is offset by -2.531096 and -1.880357 pixels which is larger than
2 X fitted extent = 1.941655 x 1.941655, not incorporating fit results
[Thu May 30 08:16:32 2013] Warning, spatial fit 44 centroid is now closest to src. 140
[Thu May 30 08:16:32 2013] Source 138 is offset by -6.805211 and -3.741231 pixels which is larger than
2 X fitted extent = 1.370060 x 1.370060, not incorporating fit results
[Thu May 30 08:16:33 2013] Vigneting correction estimate = 1.000000
[Thu May 30 08:16:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 08:16:33 2013] Assessing source extent using major
[Thu May 30 08:16:33 2013] Source does appear to be extended
[Thu May 30 08:16:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:48:11 2013] XMMSAS src. selection expression = ellipse(37251.382660, 22118.948929, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 09:48:12 2013] Writing source region out to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138_src.reg
[Thu May 30 09:48:12 2013] Extracting stamp from image fullrun_mos2_xmm0700381301_pi300-10000_cl_sm2.00.img.gz, (391, 217) - (466, 292)
[Thu May 30 09:48:12 2013] XMMSAS bgd. selection expression = annulus(37251.382660, 22118.948929, 1087.500000, 2175.000000, X, Y) && !ellipse(38500.483673, 24660.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38370.779040, 25783.545200, 1858.984053, 268.272808, 87.431600, X, Y) && !ellipse(38675.601440, 23876.170776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36625.504639, 21781.610199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35713.088000, 23698.668000, 1727.688050, 933.176027, 68.178000, X, Y) && !ellipse(37454.319824, 21701.642044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38762.464000, 18157.271400, 2650.880076, 620.297618, 47.746000, X, Y) && !ellipse(35779.938873, 22842.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36815.202200, 23364.719200, 1778.344051, 222.292806, 73.458700, X, Y) && !ellipse(35620.070000, 25021.606000, 1945.280056, 243.160007, 79.819000, X, Y) && !ellipse(36422.377840, 25205.680000, 1729.136050, 216.141606, 82.929020, X, Y) && !ellipse(36585.089340, 24269.937400, 1749.704050, 218.713606, 77.711800, X, Y) && !ellipse(36165.584534, 21874.622513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.586600, 24719.645800, 1688.408049, 836.728024, 83.481600, X, Y) && !ellipse(38843.494873, 23359.122406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35592.275000, 25275.385200, 1678.656048, 209.832006, 80.696440, X, Y) && !ellipse(39339.192000, 22101.262000, 1908.640055, 249.871207, 64.056000, X, Y) && !ellipse(38597.070800, 18332.911600, 2026.368058, 624.513618, 48.095800, X, Y) && !ellipse(35665.862000, 23815.664000, 1727.688050, 939.344027, 66.814000, X, Y) && !ellipse(40828.340400, 25902.082200, 2273.600065, 284.200008, 81.378470, X, Y) && !ellipse(41213.170200, 24338.319600, 2055.416059, 256.927207, 71.641000, X, Y) && !ellipse(35691.848000, 24162.076000, 864.064025, 290.906408, 0.950710, X, Y) && !ellipse(39971.383179, 22132.777649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39401.369629, 23440.642426, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:48:12 2013] Writing fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138.gif
[Thu May 30 12:26:19 2013] Mean detx,y = (-9410.47, -7319.60) 
[Thu May 30 12:26:21 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 12:26:40 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 12:26:41 2013] Setting source spectrum file to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138_src_b10.pi.gz
[Thu May 30 12:26:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138_bgd.pi.gz
[Thu May 30 16:31:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 16:31:07 2013] rmf not generated due to insufficient counts
[Thu May 30 18:36:23 2013] Updating aperture counts using extracted products
[Thu May 30 18:36:23 2013] Total counts from fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138_src_b10.pi.gz = 1019.00
[Thu May 30 18:36:23 2013] Total counts from fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138_bgd.pi.gz = 1021.00
[Thu May 30 18:36:23 2013] Got source and background scale factors 1138474.000000, 4589179.000000
[Thu May 30 18:36:23 2013] User source parameters:
  Position = (428.7, 254.8) = 17 8 25.05 -36 29 0.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 765.7 +/- 32.9
  Background aperture counts = 253.3
  Rate = 0.02 +/- 0.0008

[Thu May 30 18:36:23 2013] Updating counts from extracted products
[Thu May 30 18:36:23 2013] Set source signif. to 765.71/15.92 = 48.11
[Thu May 30 18:36:57 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 18:36:57 2013] Using photon index=1.80, rate=0.0178, arf fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138.arf
[Thu May 30 18:36:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 18:36:58 2013] Updating source flux to 4.7e-13
[Thu May 30 18:37:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 18:38:15 2013] xmm0700381301/analysis//spectral/fullrun_mos2_xmm0700381301_pi300-10000_pass1_cl_src138_pl.csv not found, spectral fit skipped or did not complete