[Sat May 18 03:53:05 2013] Detection parameters:
  Position = (314.2, 408.1) = 15 35 45.27 -28 40 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.8 +/- 15.9
  Background counts = 45.3
  Rate = 0.007 +/- 0.0009

[Sat May 18 03:53:06 2013] Off-axis axis estimate = 8.04'
[Sat May 18 03:56:57 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sat May 18 03:56:57 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Sat May 18 03:56:57 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Sat May 18 03:56:57 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.45"
[Sat May 18 04:58:31 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_src10.ximg exists
[Sat May 18 04:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_src10.csv
[Sat May 18 04:58:31 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat May 18 04:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_src10.csv
[Sat May 18 04:58:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 04:58:31 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat May 18 04:58:31 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 18 04:58:31 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May 18 04:58:31 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 18 04:58:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381001_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 06:18:15 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.162177 pixels away
[Sat May 18 06:18:15 2013] Vigneting correction estimate = 1.000000
[Sat May 18 06:18:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 06:18:15 2013] Assessing source extent using major
[Sat May 18 06:18:15 2013] Source does appear to be extended
[Sat May 18 06:18:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 06:18:36 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sat May 18 06:18:36 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Sat May 18 06:18:36 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Sat May 18 06:18:36 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.45"
[Sat May 18 07:01:33 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_src10.ximg exists
[Sat May 18 07:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_src10.csv
[Sat May 18 07:01:33 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat May 18 07:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_src10.csv
[Sat May 18 07:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 07:01:33 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat May 18 07:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat May 18 07:01:33 2013] fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 18 07:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat May 18 07:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700381001_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 08:05:47 2013] Warning, spatial fit 10 centroid is now closest to src. 9
[Sat May 18 08:05:47 2013] Vigneting correction estimate = 1.000000
[Sat May 18 08:05:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 08:05:47 2013] Assessing source extent using major
[Sat May 18 08:05:47 2013] Source does appear to be extended
[Sat May 18 08:05:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 08:06:14 2013] XMMSAS src. selection expression = ellipse(27289.487061, 35459.752960, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 08:06:14 2013] Writing source region out to fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10_src.reg
[Sat May 18 08:06:14 2013] Extracting stamp from image fullrun_pn_xmm0700381001_pi300-10000_cl_sm2.00.img.gz, (277, 371) - (352, 446)
[Sat May 18 08:06:14 2013] XMMSAS bgd. selection expression = annulus(27289.487061, 35459.752960, 1087.500000, 2175.000000, X, Y) && !ellipse(25113.241852, 37982.360016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.843262, 36192.432190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29336.761566, 32541.384583, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 08:06:14 2013] Writing fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10.gif
[Sat May 18 08:13:09 2013] Mean detx,y = (2527.84, -7406.94) 
[Sat May 18 08:13:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 08:13:34 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 08:13:35 2013] Setting source spectrum file to fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat May 18 08:13:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat May 18 08:35:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 08:35:18 2013] rmf not generated due to insufficient counts
[Sat May 18 09:02:39 2013] Updating aperture counts using extracted products
[Sat May 18 09:02:39 2013] Total counts from fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 316.00
[Sat May 18 09:02:39 2013] Total counts from fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1594.00
[Sat May 18 09:02:39 2013] Got source and background scale factors 1195096.000000, 8668086.000000
[Sat May 18 09:02:39 2013] User source parameters:
  Position = (314.2, 408.1) = 15 35 45.27 -28 40 30.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 96.2 +/- 18.8
  Background aperture counts = 219.8
  Rate = 0.003 +/- 0.0006

[Sat May 18 09:02:39 2013] Updating counts from extracted products
[Sat May 18 09:02:39 2013] Set source signif. to 96.23/14.82 = 6.49
[Sat May 18 09:02:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 09:02:43 2013] Using photon index=1.80, rate=0.00322, arf fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10.arf
[Sat May 18 09:02:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 09:02:43 2013] Updating source flux to 1.5e-14
[Sat May 18 09:02:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 09:02:55 2013] xmm0700381001/analysis//spectral/fullrun_pn_xmm0700381001_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete