[Sun May 19 21:42:34 2013] Detection parameters:
  Position = (158.2, 165.0) = 5 57 27.66 -33 19 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.5 +/- 17.3
  Background counts = 19.2
  Rate = 0.006 +/- 0.0007

[Sun May 19 21:42:35 2013] Off-axis axis estimate = 14.04'
[Sun May 19 21:44:36 2013] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Sun May 19 21:44:36 2013] Initial guess for spatial extent in simple fitting = 13.45"
[Sun May 19 21:44:36 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.086
[Sun May 19 21:44:36 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 13.45"
[Sun May 19 23:05:02 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 19 23:05:02 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 19 23:05:02 2013] Fit fullrun_pn_xmm0700380901_pi300-10000_cl_pass0_src9 appears to have run properly
[Sun May 19 23:05:02 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 19 23:05:02 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 19 23:05:02 2013] Fit fullrun_pn_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon May 20 00:41:05 2013] Source 9 is offset by -2.780175 and 6.961525 pixels which is larger than
2 X fitted extent = 1.558795 x 1.558795, not incorporating fit results
[Mon May 20 00:41:05 2013] Warning, spatial fit 9 centroid is now closest to src. 1
[Mon May 20 00:41:05 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:41:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:41:05 2013] Assessing source extent using major
[Mon May 20 00:41:05 2013] Source does appear to be extended
[Mon May 20 00:41:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 00:41:40 2013] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Mon May 20 00:41:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 00:41:40 2013] Initial guess for spatial extent in simple fitting = 13.45"
[Mon May 20 00:41:40 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.086
[Mon May 20 00:41:40 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 13.45"
[Mon May 20 02:11:40 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_src9.ximg exists
[Mon May 20 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_src9.csv
[Mon May 20 02:11:40 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May 20 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_src9.csv
[Mon May 20 02:11:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 02:11:40 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May 20 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon May 20 02:11:40 2013] fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 20 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon May 20 02:11:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 04:24:32 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 17.378218 pixels away
[Mon May 20 04:24:32 2013] Vigneting correction estimate = 1.000000
[Mon May 20 04:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 04:24:32 2013] Assessing source extent using major
[Mon May 20 04:24:32 2013] Source does appear to be extended
[Mon May 20 04:24:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 04:25:08 2013] XMMSAS src. selection expression = ellipse(13714.044815, 14305.732697, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 04:25:08 2013] Writing source region out to fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9_src.reg
[Mon May 20 04:25:08 2013] Extracting stamp from image fullrun_pn_xmm0700380901_pi300-10000_cl_sm2.00.img.gz, (121, 127) - (196, 202)
[Mon May 20 04:25:08 2013] XMMSAS bgd. selection expression = annulus(13714.044815, 14305.732697, 1087.500000, 2175.000000, X, Y) && !ellipse(12941.668200, 14764.882400, 750.224022, 345.268010, 40.094100, X, Y)
[Mon May 20 04:25:08 2013] Writing fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9.gif
[Mon May 20 04:33:09 2013] Mean detx,y = (3983.24, -14640.17) 
[Mon May 20 04:33:14 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 04:33:49 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 04:33:50 2013] Setting source spectrum file to fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 20 04:33:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 20 05:27:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 05:27:29 2013] rmf not generated due to insufficient counts
[Mon May 20 06:42:25 2013] Updating aperture counts using extracted products
[Mon May 20 06:42:25 2013] Total counts from fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 425.00
[Mon May 20 06:42:25 2013] Total counts from fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1230.00
[Mon May 20 06:42:25 2013] Got source and background scale factors 1259030.000000, 9854298.000000
[Mon May 20 06:42:25 2013] User source parameters:
  Position = (158.2, 165.0) = 5 57 27.66 -33 19 21.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 267.8 +/- 21.6
  Background aperture counts = 157.2
  Rate = 0.01 +/- 0.0009

[Mon May 20 06:42:25 2013] Updating counts from extracted products
[Mon May 20 06:42:25 2013] Set source signif. to 267.85/12.54 = 21.37
[Mon May 20 06:42:36 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 06:42:36 2013] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9.arf
[Mon May 20 06:42:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 06:42:36 2013] Updating source flux to 8.1e-14
[Mon May 20 06:43:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 06:43:16 2013] xmm0700380901/analysis//spectral/fullrun_pn_xmm0700380901_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete