[Sun May 19 21:43:22 2013] Detection parameters:
  Position = (127.3, 375.6) = 5 57 38.22 -33 4 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 10.7
  Background counts = 7.6
  Rate = 0.002 +/- 0.0004

[Sun May 19 21:43:23 2013] Off-axis axis estimate = 13.61'
[Sun May 19 23:47:28 2013] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Sun May 19 23:47:28 2013] Initial guess for spatial extent in simple fitting = 13.23"
[Sun May 19 23:47:28 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.976
[Sun May 19 23:47:28 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 13.23"
[Mon May 20 00:40:49 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 20 00:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_src11.csv
[Mon May 20 00:40:49 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 20 00:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_src11.csv
[Mon May 20 00:40:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:40:50 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 20 00:40:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 20 00:40:50 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 20 00:40:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 20 00:40:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380901_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 00:41:23 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 17.284060 pixels away
[Mon May 20 00:41:23 2013] Vigneting correction estimate = 1.000000
[Mon May 20 00:41:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 00:41:23 2013] Assessing source extent using major
[Mon May 20 00:41:23 2013] Source does appear to be extended
[Mon May 20 00:41:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:11:28 2013] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Mon May 20 03:11:28 2013] Initial guess for spatial extent in simple fitting = 13.23"
[Mon May 20 03:11:28 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.976
[Mon May 20 03:11:28 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 13.23"
[Mon May 20 04:24:17 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 20 04:24:17 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 20 04:24:17 2013] Fit fullrun_mos2_xmm0700380901_pi300-10000_cl_pass1_src11 appears to have run properly
[Mon May 20 04:24:17 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 20 04:24:17 2013] fullrun_mos2_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 20 04:24:17 2013] Fit fullrun_mos2_xmm0700380901_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon May 20 04:24:48 2013] Spatial fit model total counts = 146.849000, observed total counts = 140.000000
[Mon May 20 04:24:48 2013] Offset between fit and detection position for source 8 = 0.275178 pixels
[Mon May 20 04:24:48 2013] 145.634000 total counts/ 96.611900 bgd. counts: snr = 4.987428
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.275178 pixels
  Position = (127.3, 375.3) = 5 57 38.22 -33 4 5.4
  Extent = 6.1 (4.8-8.2)", rotation angle = 294 (277-308) degrees
  Source counts = 49.0 +/- 12.1
  Background counts = 96.6
  Rate = 0.002 +/- 0.0004
[Mon May 20 04:24:48 2013] Vigneting correction estimate = 1.000000
[Mon May 20 04:24:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 04:24:48 2013] Assessing source extent using major axis lower bound
[Mon May 20 04:24:48 2013] Source does appear to be extended
[Mon May 20 04:24:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Mon May 20 06:06:51 2013] XMMSAS src. selection expression = ellipse(11024.336800, 32606.378600, 368.828411, 198.516606, 294.316535, X, Y)
[Mon May 20 06:06:51 2013] Writing source region out to fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8_src.reg
[Mon May 20 06:06:51 2013] Extracting stamp from image fullrun_mos2_xmm0700380901_pi300-10000_cl_sm2.00.img.gz, (106, 354) - (148, 397)
[Mon May 20 06:06:51 2013] XMMSAS bgd. selection expression = annulus(11024.336800, 32606.378600, 614.714018, 1229.428035, X, Y)
[Mon May 20 06:06:51 2013] Writing fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8.gif
[Mon May 20 06:11:11 2013] Mean detx,y = (-15057.27, 13.33) 
[Mon May 20 06:11:13 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 06:11:26 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 06:11:26 2013] Setting source spectrum file to fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 20 06:11:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May 20 06:38:40 2013] Not generating rmf since there are only 49 counts
[Mon May 20 06:38:40 2013] rmf not generated due to insufficient counts
[Mon May 20 06:42:48 2013] Updating aperture counts using extracted products
[Mon May 20 06:42:48 2013] Total counts from fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 52.00
[Mon May 20 06:42:48 2013] Total counts from fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8_bgd.pi.gz = 137.00
[Mon May 20 06:42:48 2013] Got source and background scale factors 232000.000000, 3281740.000000
[Mon May 20 06:42:48 2013] User source parameters:
  Position = (127.3, 375.3) = 5 57 38.22 -33 4 5.4
  Extent = 6.1 (4.8-8.2)", rotation angle = 294 (277-308) degrees
  Source aperture counts = 42.3 +/- 8.3
  Background aperture counts = 9.7
  Rate = 0.001 +/- 0.0003

[Mon May 20 06:42:54 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 06:42:54 2013] Using photon index=1.80, rate=0.0017, arf fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8.arf
[Mon May 20 06:42:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 06:42:54 2013] Updating source flux to 6e-14
[Mon May 20 06:43:02 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 20 06:43:08 2013] xmm0700380901/analysis//spectral/fullrun_mos2_xmm0700380901_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete