[Sun Jun 16 18:54:39 2013] Detection parameters:
  Position = (355.7, 198.5) = 0 42 12.91 41 18 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1810.9 +/- 51.5
  Background counts = 41.1
  Rate = 0.08 +/- 0.002

[Sun Jun 16 18:54:41 2013] Off-axis axis estimate = 8.35'
[Sun Jun 16 18:58:15 2013] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 18:58:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 18:58:15 2013] Initial guess for spatial extent in simple fitting = 10.60"
[Sun Jun 16 18:58:15 2013] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.782
[Sun Jun 16 18:58:15 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.60"
[Mon Jun 17 00:28:32 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 17 00:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src4.csv
[Mon Jun 17 00:28:32 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 17 00:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src4.csv
[Mon Jun 17 00:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:28:34 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 17 00:28:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 17 00:28:34 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 17 00:28:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 17 00:28:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:15 2013] Warning, spatial fit 4 centroid is now closest to src. 86
[Mon Jun 17 09:21:16 2013] Spatial fit model total counts = 1364.810000, observed total counts = 1130.000000
[Mon Jun 17 09:21:16 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 09:21:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:16 2013] Assessing source extent using major
[Mon Jun 17 09:21:16 2013] Source does appear to be extended
[Mon Jun 17 09:21:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:22:06 2013] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 09:22:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 09:22:06 2013] Initial guess for spatial extent in simple fitting = 10.60"
[Mon Jun 17 09:22:06 2013] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.782
[Mon Jun 17 09:22:06 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.60"
[Mon Jun 17 16:47:36 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 17 16:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src4.csv
[Mon Jun 17 16:47:36 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 17 16:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src4.csv
[Mon Jun 17 16:47:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 16:47:38 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 17 16:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 17 16:47:38 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 17 16:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 17 16:47:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:33 2013] Warning, spatial fit 4 centroid is now closest to src. 86
[Mon Jun 17 23:37:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:33 2013] Assessing source extent using major
[Mon Jun 17 23:37:33 2013] Source does appear to be extended
[Mon Jun 17 23:37:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 23:38:19 2013] Counts = 1810.881226, rescaling region sizes by 2.000000
[Mon Jun 17 23:38:19 2013] XMMSAS src. selection expression = ellipse(30895.255798, 17218.718002, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 17 23:38:19 2013] Writing source region out to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 17 23:38:19 2013] Extracting stamp from image fullrun_pn_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (281, 123) - (431, 273)
[Mon Jun 17 23:38:19 2013] XMMSAS bgd. selection expression = annulus(30895.255798, 17218.718002, 4350.000000, 8700.000000, X, Y) && !ellipse(22916.369720, 25394.605927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.222400, 25260.240200, 499.555214, 499.555214, 0.000000, X, Y) && !ellipse(21989.260000, 17673.178000, 413.912812, 413.912812, 0.000000, X, Y) && !ellipse(23132.412109, 14777.111908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26834.444244, 14541.155472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23687.284027, 14389.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24259.052551, 13919.370178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22019.532340, 13684.947000, 495.692814, 292.032008, 5.860650, X, Y) && !ellipse(25399.002655, 14092.808640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28385.826000, 13116.242000, 1972.768057, 1972.768057, 0.000000, X, Y) && !ellipse(22911.842896, 13342.486740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.345551, 10746.228508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.503326, 9697.620705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29882.940600, 9803.391600, 1920.096055, 427.702412, 340.185000, X, Y) && !ellipse(32101.491600, 16782.524400, 630.296018, 316.376809, 318.129800, X, Y) && !ellipse(24660.360229, 14331.960403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29048.053680, 14001.247299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23070.741089, 8367.787552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.490000, 8844.260000, 639.653618, 276.711208, 3.820000, X, Y) && !ellipse(27960.943580, 25922.064400, 474.552014, 474.552014, 0.000000, X, Y) && !ellipse(21408.777710, 25896.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22791.708130, 23803.340668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26185.394600, 21035.705600, 578.948817, 449.648013, 60.391658, X, Y) && !ellipse(24445.794037, 20214.880066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31789.856840, 19841.669600, 630.812818, 368.052011, 320.443463, X, Y) && !ellipse(30363.209167, 19541.484985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.978600, 19006.730600, 430.489612, 353.776810, 350.670150, X, Y) && !ellipse(27913.875610, 18175.566666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.212006, 18446.489838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38048.093231, 18020.167801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24801.406800, 17405.458600, 520.369615, 394.384811, 348.555200, X, Y) && !ellipse(22749.962120, 16805.122000, 448.205613, 340.952010, 0.213275, X, Y) && !ellipse(21829.550735, 16483.764740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20643.296000, 16201.730000, 1782.048051, 1782.048051, 0.000000, X, Y) && !ellipse(31128.290375, 16440.617859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.395752, 16414.115356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31308.606000, 15573.876000, 1781.712051, 1781.712051, 0.000000, X, Y) && !ellipse(23634.130341, 15626.599152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30349.424255, 15663.101822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22052.467520, 15058.143200, 446.341613, 234.983207, 2.925680, X, Y) && !ellipse(26140.528442, 14464.263168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22701.399963, 14161.421234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25155.653290, 12837.609024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.114502, 12298.157516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24306.360000, 12596.246000, 462.824813, 250.000807, 350.198320, X, Y) && !ellipse(29035.758240, 12100.519791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28675.866364, 11852.194901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.220000, 11712.556000, 598.920817, 246.596007, 326.765000, X, Y) && !ellipse(28181.377777, 11281.664948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.065600, 11115.608660, 988.928028, 365.228011, 314.449600, X, Y) && !ellipse(28992.784000, 11217.176400, 917.432026, 251.973607, 339.310000, X, Y) && !ellipse(24685.925507, 11032.486465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32071.182000, 10650.310000, 2135.872061, 1625.304047, 129.544000, X, Y) && !ellipse(30471.149384, 9953.280113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29815.764200, 9779.510400, 1642.384047, 424.824012, 339.939000, X, Y) && !ellipse(23840.083618, 9212.827621, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 23:38:19 2013] Writing fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5.gif
[Mon Jun 17 23:46:57 2013] Mean detx,y = (-10619.72, -2211.38) 
[Mon Jun 17 23:47:02 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 23:48:31 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 23:48:31 2013] Setting source spectrum file to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 17 23:48:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jun 18 02:04:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 02:04:49 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:57:21 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:57:21 2013] Total counts from fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 3534.00
[Tue Jun 18 09:57:21 2013] Total counts from fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 21879.00
[Tue Jun 18 09:57:21 2013] Got source and background scale factors 4476157.000000, 113024826.000000
[Tue Jun 18 09:57:21 2013] User source parameters:
  Position = (355.7, 198.5) = 0 42 12.91 41 18 34.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2667.5 +/- 60.5
  Background aperture counts = 866.5
  Rate = 0.1 +/- 0.003

[Tue Jun 18 09:57:21 2013] Updating counts from extracted products
[Tue Jun 18 09:57:21 2013] Set source signif. to 2667.52/29.44 = 90.62
[Tue Jun 18 09:57:53 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:57:53 2013] Using photon index=1.80, rate=0.13, arf fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5.arf
[Tue Jun 18 09:57:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:57:53 2013] Updating source flux to 8.6e-13
[Tue Jun 18 09:59:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:00:18 2013] xmm0700380601/analysis//spectral/fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete