[Sun Jun 16 18:54:40 2013] Detection parameters:
  Position = (230.9, 359.8) = 0 43 1.18 41 30 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1414.1 +/- 46.5
  Background counts = 35.1
  Rate = 0.09 +/- 0.003

[Sun Jun 16 18:54:41 2013] Off-axis axis estimate = 6.62'
[Sun Jun 16 18:58:15 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 18:58:15 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Sun Jun 16 18:58:15 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.200
[Sun Jun 16 18:58:15 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 9.74"
[Mon Jun 17 00:28:32 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src41.ximg exists
[Mon Jun 17 00:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src41.csv
[Mon Jun 17 00:28:32 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon Jun 17 00:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src41.csv
[Mon Jun 17 00:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:28:35 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon Jun 17 00:28:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src41.csv
[Mon Jun 17 00:28:35 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Jun 17 00:28:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src41.csv
[Mon Jun 17 00:28:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:15 2013] Warning, spatial fit 41 centroid is now closest to src. 39
[Mon Jun 17 09:21:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:16 2013] Assessing source extent using major
[Mon Jun 17 09:21:16 2013] Source does appear to be extended
[Mon Jun 17 09:21:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:22:06 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 09:22:06 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Mon Jun 17 09:22:06 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.200
[Mon Jun 17 09:22:06 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 9.74"
[Mon Jun 17 16:47:37 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jun 17 16:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src37.csv
[Mon Jun 17 16:47:37 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jun 17 16:47:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src37.csv
[Mon Jun 17 16:47:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 16:47:38 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jun 17 16:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 17 16:47:38 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jun 17 16:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 17 16:47:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:33 2013] Source 42 is offset by -4.933169 and 8.226899 pixels which is larger than
2 X fitted extent = 2.319784 x 2.319784, not incorporating fit results
[Mon Jun 17 23:37:33 2013] Warning, spatial fit 37 centroid is now closest to src. 41
[Mon Jun 17 23:37:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:33 2013] Assessing source extent using major
[Mon Jun 17 23:37:33 2013] Source does appear to be extended
[Mon Jun 17 23:37:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 23:38:21 2013] Counts = 1414.138550, rescaling region sizes by 2.000000
[Mon Jun 17 23:38:21 2013] XMMSAS src. selection expression = ellipse(20036.106323, 31253.050201, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 17 23:38:21 2013] Writing source region out to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42_src.reg
[Mon Jun 17 23:38:21 2013] Extracting stamp from image fullrun_pn_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (156, 285) - (306, 435)
[Mon Jun 17 23:38:21 2013] XMMSAS bgd. selection expression = annulus(20036.106323, 31253.050201, 4350.000000, 8700.000000, X, Y) && !ellipse(22916.369720, 25394.605927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.222400, 25260.240200, 499.555214, 499.555214, 0.000000, X, Y) && !ellipse(22151.150800, 32251.048200, 1462.262442, 1292.155237, 349.625300, X, Y) && !ellipse(26091.131622, 34315.204346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.770000, 37658.642000, 1846.400053, 1846.400053, 0.000000, X, Y) && !ellipse(21829.354263, 33263.005615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18407.942795, 31395.399597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21770.413940, 30721.489441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27218.611600, 29747.192400, 492.164014, 388.711211, 29.264054, X, Y) && !ellipse(10676.078651, 29537.272034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23427.900940, 28961.690887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15899.971588, 27884.412750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11522.290253, 27181.315857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26732.290040, 26358.711200, 421.212012, 421.212012, 0.000000, X, Y) && !ellipse(27960.943580, 25922.064400, 474.552014, 474.552014, 0.000000, X, Y) && !ellipse(21408.777710, 25896.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22791.708130, 23803.340668, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 23:38:21 2013] Writing fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42.gif
[Tue Jun 18 00:42:06 2013] Mean detx,y = (6734.28, 1989.24) 
[Tue Jun 18 00:42:10 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 00:44:23 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 00:44:24 2013] Setting source spectrum file to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Jun 18 00:44:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Tue Jun 18 02:54:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 02:54:36 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:57:31 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:57:31 2013] Total counts from fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 2614.00
[Tue Jun 18 09:57:32 2013] Total counts from fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42_bgd.pi.gz = 21589.00
[Tue Jun 18 09:57:32 2013] Got source and background scale factors 4797040.000000, 137046243.000000
[Tue Jun 18 09:57:32 2013] User source parameters:
  Position = (230.9, 359.8) = 0 43 1.18 41 30 16.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1858.3 +/- 52.1
  Background aperture counts = 755.7
  Rate = 0.09 +/- 0.003

[Tue Jun 18 09:57:32 2013] Updating counts from extracted products
[Tue Jun 18 09:57:32 2013] Set source signif. to 1858.32/27.49 = 67.60
[Tue Jun 18 09:57:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:57:55 2013] Using photon index=1.80, rate=0.0906, arf fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42.arf
[Tue Jun 18 09:57:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:57:55 2013] Updating source flux to 3.6e-13
[Tue Jun 18 09:59:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:00:18 2013] xmm0700380601/analysis//spectral/fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete