[Sun Jun 16 18:54:39 2013] Detection parameters:
  Position = (334.4, 161.5) = 0 42 21.12 41 15 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 583.3 +/- 34.3
  Background counts = 63.0
  Rate = 0.03 +/- 0.002

[Sun Jun 16 18:54:41 2013] Off-axis axis estimate = 10.27'
[Sun Jun 16 18:58:15 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 18:58:15 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Sun Jun 16 18:58:15 2013] source mask rpix=2.7, npix_max = 39, mask sum = 30, frac = 0.752
[Sun Jun 16 18:58:15 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 11.56"
[Mon Jun 17 00:28:32 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jun 17 00:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src27.csv
[Mon Jun 17 00:28:32 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jun 17 00:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src27.csv
[Mon Jun 17 00:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:28:34 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jun 17 00:28:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jun 17 00:28:34 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jun 17 00:28:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jun 17 00:28:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:15 2013] Warning, spatial fit 27 centroid is now closest to src. 17
[Mon Jun 17 09:21:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:16 2013] Assessing source extent using major
[Mon Jun 17 09:21:16 2013] Source does appear to be extended
[Mon Jun 17 09:21:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:21:16 2013] Source is confused with source 17
[Mon Jun 17 09:22:06 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 09:22:06 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Mon Jun 17 09:22:06 2013] source mask rpix=2.7, npix_max = 39, mask sum = 30, frac = 0.752
[Mon Jun 17 09:22:06 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 11.56"
[Mon Jun 17 16:47:36 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src27.ximg exists
[Mon Jun 17 16:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src27.csv
[Mon Jun 17 16:47:36 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Jun 17 16:47:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src27.csv
[Mon Jun 17 16:47:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 16:47:38 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Jun 17 16:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Jun 17 16:47:38 2013] fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Jun 17 16:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Jun 17 16:47:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:33 2013] Source 28 is offset by 4.390985 and 4.087118 pixels which is larger than
2 X fitted extent = 2.880483 x 2.880483, not incorporating fit results
[Mon Jun 17 23:37:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:33 2013] Assessing source extent using major
[Mon Jun 17 23:37:33 2013] Source does appear to be extended
[Mon Jun 17 23:37:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 23:38:21 2013] XMMSAS src. selection expression = ellipse(29048.053680, 14001.247299, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 23:38:21 2013] Writing source region out to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28_src.reg
[Mon Jun 17 23:38:21 2013] Extracting stamp from image fullrun_pn_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (297, 124) - (372, 199)
[Mon Jun 17 23:38:21 2013] XMMSAS bgd. selection expression = annulus(29048.053680, 14001.247299, 1087.500000, 2175.000000, X, Y) && !ellipse(26834.444244, 14541.155472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28385.826000, 13116.242000, 1972.768057, 1972.768057, 0.000000, X, Y) && !ellipse(31128.290375, 16440.617859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31308.606000, 15573.876000, 1781.712051, 1781.712051, 0.000000, X, Y) && !ellipse(30349.424255, 15663.101822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26140.528442, 14464.263168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29035.758240, 12100.519791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28675.866364, 11852.194901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.220000, 11712.556000, 598.920817, 246.596007, 326.765000, X, Y) && !ellipse(28181.377777, 11281.664948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28992.784000, 11217.176400, 917.432026, 251.973607, 339.310000, X, Y) && !ellipse(32071.182000, 10650.310000, 2135.872061, 1625.304047, 129.544000, X, Y)
[Mon Jun 17 23:38:21 2013] Writing fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28.gif
[Tue Jun 18 00:33:16 2013] Mean detx,y = (-10980.42, -6189.18) 
[Tue Jun 18 00:33:21 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 00:33:36 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 00:33:36 2013] Setting source spectrum file to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jun 18 00:33:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jun 18 02:44:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 02:44:41 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:57:29 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:57:29 2013] Total counts from fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 3645.00
[Tue Jun 18 09:57:29 2013] Total counts from fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28_bgd.pi.gz = 881.00
[Tue Jun 18 09:57:29 2013] Got source and background scale factors 1037652.000000, 2838867.000000
[Tue Jun 18 09:57:29 2013] User source parameters:
  Position = (334.4, 161.5) = 0 42 21.12 41 15 59.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3323.0 +/- 61.4
  Background aperture counts = 322.0
  Rate = 0.2 +/- 0.003

[Tue Jun 18 09:57:29 2013] Updating counts from extracted products
[Tue Jun 18 09:57:29 2013] Set source signif. to 3322.98/17.94 = 185.18
[Tue Jun 18 09:57:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:57:55 2013] Using photon index=1.80, rate=0.162, arf fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28.arf
[Tue Jun 18 09:57:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:57:55 2013] Updating source flux to 1.4e-12
[Tue Jun 18 09:59:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:00:18 2013] xmm0700380601/analysis//spectral/fullrun_pn_xmm0700380601_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete