[Sun Jun 16 18:56:02 2013] Detection parameters:
  Position = (331.0, 128.3) = 0 42 22.44 41 13 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.5 +/- 16.2
  Background counts = 22.0
  Rate = 0.007 +/- 0.0007

[Sun Jun 16 18:56:02 2013] Off-axis axis estimate = 12.56'
[Mon Jun 17 05:28:44 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 05:28:44 2013] Initial guess for spatial extent in simple fitting = 12.71"
[Mon Jun 17 05:28:44 2013] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.875
[Mon Jun 17 05:28:44 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 12.71"
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src47.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src47.csv
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src47_1.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src47.csv
[Mon Jun 17 09:20:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Mon Jun 17 09:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Mon Jun 17 09:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon Jun 17 09:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:44 2013] Warning, spatial fit 47 centroid is now closest to src. 11
[Mon Jun 17 09:21:44 2013] Spatial fit model total counts = 634.209000, observed total counts = 367.000000
[Mon Jun 17 09:21:44 2013] Poor agreement between spatial fit and data for source 74
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 09:21:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:44 2013] Assessing source extent using major
[Mon Jun 17 09:21:44 2013] Source does appear to be extended
[Mon Jun 17 09:21:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:21:44 2013] Source is confused with source 72
[Mon Jun 17 20:13:34 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 20:13:34 2013] Initial guess for spatial extent in simple fitting = 12.71"
[Mon Jun 17 20:13:34 2013] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.875
[Mon Jun 17 20:13:34 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 12.71"
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src46.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src46.csv
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src46.csv
[Mon Jun 17 23:37:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Jun 17 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:58 2013] Spatial fit model total counts = 598.716000, observed total counts = 499.000000
[Mon Jun 17 23:37:58 2013] Poor agreement between spatial fit and data for source 74
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 23:37:58 2013] Source 74 is offset by -4.456148 and -0.295386 pixels which is larger than
2 X fitted extent = 1.449632 x 1.449632, not incorporating fit results
[Mon Jun 17 23:37:58 2013] Spatial fit model total counts = 634.209000, observed total counts = 367.000000
[Mon Jun 17 23:37:58 2013] Poor agreement between spatial fit and data for source 74
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 23:37:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:58 2013] Assessing source extent using major
[Mon Jun 17 23:37:58 2013] Source does appear to be extended
[Mon Jun 17 23:37:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 07:49:41 2013] XMMSAS src. selection expression = ellipse(28750.831116, 11111.063385, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 07:49:41 2013] Writing source region out to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74_src.reg
[Tue Jun 18 07:49:41 2013] Extracting stamp from image fullrun_mos2_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (294, 91) - (369, 166)
[Tue Jun 18 07:49:41 2013] XMMSAS bgd. selection expression = annulus(28750.831116, 11111.063385, 1087.500000, 2175.000000, X, Y) && !ellipse(28712.978000, 13588.794000, 413.204812, 344.190410, 348.921200, X, Y) && !ellipse(26577.989655, 10727.657242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.774353, 14051.076889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.815000, 14922.778000, 1795.688052, 890.832026, 75.138500, X, Y) && !ellipse(28166.220215, 11247.389847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28826.974000, 11930.517400, 1118.744032, 603.288017, 17.182700, X, Y) && !ellipse(29487.994690, 11661.582382, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 07:49:41 2013] Writing fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74.gif
[Tue Jun 18 08:17:02 2013] Mean detx,y = (12589.04, 8032.47) 
[Tue Jun 18 08:17:03 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 08:17:22 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 08:17:22 2013] Setting source spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Tue Jun 18 08:17:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Tue Jun 18 09:53:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 09:53:26 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:29 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:29 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 300.00
[Tue Jun 18 09:58:29 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74_bgd.pi.gz = 753.00
[Tue Jun 18 09:58:29 2013] Got source and background scale factors 967156.000000, 3616740.000000
[Tue Jun 18 09:58:29 2013] User source parameters:
  Position = (331.0, 128.3) = 0 42 22.44 41 13 29.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 98.6 +/- 18.3
  Background aperture counts = 201.4
  Rate = 0.004 +/- 0.0008

[Tue Jun 18 09:58:29 2013] Updating counts from extracted products
[Tue Jun 18 09:58:29 2013] Set source signif. to 98.64/14.19 = 6.95
[Tue Jun 18 09:58:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:37 2013] Using photon index=1.80, rate=0.00423, arf fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74.arf
[Tue Jun 18 09:58:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:37 2013] Updating source flux to 1.5e-13
[Tue Jun 18 09:59:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:41 2013] xmm0700380601/analysis//spectral/fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete