[Sun Jun 16 18:56:01 2013] Detection parameters:
  Position = (254.4, 173.0) = 0 42 52.00 41 16 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 16.0
  Background counts = 32.8
  Rate = 0.005 +/- 0.0007

[Sun Jun 16 18:56:02 2013] Off-axis axis estimate = 9.64'
[Mon Jun 17 05:28:44 2013] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 05:28:44 2013] Initial guess for spatial extent in simple fitting = 11.25"
[Mon Jun 17 05:28:44 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Mon Jun 17 05:28:44 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 11.25"
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src54.ximg exists
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src54_1.ximg exists
[Mon Jun 17 09:20:51 2013] Fit fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src54 appears to have run properly
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Mon Jun 17 09:20:52 2013] Fit fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Mon Jun 17 09:21:44 2013] Spatial fit model total counts = 713.818000, observed total counts = 712.000000
[Mon Jun 17 09:21:44 2013] Offset between fit and detection position for source 62 = 0.439789 pixels
[Mon Jun 17 09:21:44 2013] 696.238800 total counts/ 641.514000 bgd. counts: snr = 2.160634
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.439789 pixels
  Position = (254.1, 173.4) = 0 42 52.10 41 16 45.4
  Extent = 8.2 (5.1-16.6)" x 3.2 (2.8-5.0)", rotation angle = 40 (19-59) degrees
  Source counts = 54.7 +/- 26.4
  Background counts = 641.5
  Rate = 0.002 +/- 0.001
[Mon Jun 17 09:21:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:44 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 09:21:44 2013] Source does appear to be extended
[Mon Jun 17 09:21:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Mon Jun 17 09:21:44 2013] Source is confused with source 61
[Mon Jun 17 20:13:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 20:13:34 2013] Initial guess for spatial extent in simple fitting = 5.72"
[Mon Jun 17 20:13:34 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.912
[Mon Jun 17 20:13:34 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 5.72"
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src53.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src53.csv
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src53.csv
[Mon Jun 17 23:37:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jun 17 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:58 2013] Spatial fit model total counts = 382.580000, observed total counts = 712.000000
[Mon Jun 17 23:37:58 2013] Poor agreement between spatial fit and data for source 62
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 23:37:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:58 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 23:37:58 2013] Source does appear to be extended
[Mon Jun 17 23:37:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Tue Jun 18 07:49:41 2013] XMMSAS src. selection expression = ellipse(22062.177560, 15033.363200, 494.302814, 191.631606, 40.036500, X, Y)
[Tue Jun 18 07:49:41 2013] Writing source region out to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62_src.reg
[Tue Jun 18 07:49:41 2013] Extracting stamp from image fullrun_mos2_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (226, 145) - (283, 202)
[Tue Jun 18 07:49:41 2013] XMMSAS bgd. selection expression = annulus(22062.177560, 15033.363200, 823.838024, 1647.676047, X, Y) && !ellipse(23219.018000, 14462.642000, 648.752019, 648.752019, 0.000000, X, Y) && !ellipse(22894.482000, 13315.554000, 670.070419, 579.980017, 345.119000, X, Y) && !ellipse(19616.838699, 13368.487442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.428920, 14687.878600, 371.283211, 272.263208, 359.886034, X, Y) && !ellipse(20328.678604, 14202.555603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.778000, 13913.982000, 1194.864034, 744.812821, 346.605000, X, Y) && !ellipse(21424.246200, 14118.448200, 538.942416, 249.822407, 4.807950, X, Y) && !ellipse(22001.556808, 13686.027618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21354.149155, 17168.567154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.739105, 15152.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.764709, 16742.987198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.626404, 12565.943771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23966.924000, 15799.688000, 1754.736050, 1299.440037, 7.771280, X, Y) && !ellipse(23457.074402, 13699.042572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20682.477188, 13446.640884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.640198, 15251.970535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24041.772919, 13210.024673, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 07:49:41 2013] Writing fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62.gif
[Tue Jun 18 08:19:15 2013] Mean detx,y = (5098.71, 9206.82) 
[Tue Jun 18 08:19:16 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 08:19:26 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 08:19:26 2013] Setting source spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Jun 18 08:19:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Tue Jun 18 09:54:09 2013] Not generating rmf since there are only 54 counts
[Tue Jun 18 09:54:09 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:31 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:31 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 147.00
[Tue Jun 18 09:58:31 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62_bgd.pi.gz = 306.00
[Tue Jun 18 09:58:31 2013] Got source and background scale factors 281776.000000, 1531944.000000
[Tue Jun 18 09:58:31 2013] User source parameters:
  Position = (254.1, 173.4) = 0 42 52.10 41 16 45.4
  Extent = 8.2 (5.1-16.6)" x 3.2 (2.8-5.0)", rotation angle = 40 (19-59) degrees
  Source aperture counts = 90.7 +/- 13.2
  Background aperture counts = 56.3
  Rate = 0.004 +/- 0.0006

[Tue Jun 18 09:58:38 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:38 2013] Using photon index=1.80, rate=0.00235, arf fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62.arf
[Tue Jun 18 09:58:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:38 2013] Updating source flux to 7.4e-14
[Tue Jun 18 09:59:11 2013] Flag p found in src. 62 procflags, skipping spectral fitting
[Tue Jun 18 09:59:11 2013] Flag c found in src. 62 procflags, skipping spectral fitting
[Tue Jun 18 09:59:11 2013] Source 62 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 18 09:59:41 2013] xmm0700380601/analysis//spectral/fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete