[Sun Jun 16 18:56:01 2013] Detection parameters:
  Position = (262.2, 193.0) = 0 42 49.00 41 18 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.1 +/- 13.9
  Background counts = 30.9
  Rate = 0.008 +/- 0.001

[Sun Jun 16 18:56:02 2013] Off-axis axis estimate = 8.08'
[Mon Jun 17 05:28:44 2013] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 05:28:44 2013] Initial guess for spatial extent in simple fitting = 10.47"
[Mon Jun 17 05:28:44 2013] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.947
[Mon Jun 17 05:28:44 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 10.47"
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src40.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src40.csv
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src40.csv
[Mon Jun 17 09:20:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Jun 17 09:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src40.csv
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Jun 17 09:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src40.csv
[Mon Jun 17 09:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:44 2013] Warning, spatial fit 40 centroid is now closest to src. 53
[Mon Jun 17 09:21:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:44 2013] Assessing source extent using major
[Mon Jun 17 09:21:44 2013] Source does appear to be extended
[Mon Jun 17 09:21:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 20:13:34 2013] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 20:13:34 2013] Initial guess for spatial extent in simple fitting = 10.47"
[Mon Jun 17 20:13:34 2013] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.947
[Mon Jun 17 20:13:34 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 10.47"
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src39.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src39.csv
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src39.csv
[Mon Jun 17 23:37:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jun 17 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:58 2013] Warning, spatial fit 39 centroid is now closest to src. 53
[Mon Jun 17 23:37:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:58 2013] Assessing source extent using major
[Mon Jun 17 23:37:58 2013] Source does appear to be extended
[Mon Jun 17 23:37:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 07:49:41 2013] XMMSAS src. selection expression = ellipse(22761.764709, 16742.987198, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 07:49:41 2013] Writing source region out to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55_src.reg
[Tue Jun 18 07:49:41 2013] Extracting stamp from image fullrun_mos2_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (225, 156) - (300, 231)
[Tue Jun 18 07:49:41 2013] XMMSAS bgd. selection expression = annulus(22761.764709, 16742.987198, 1087.500000, 2175.000000, X, Y) && !ellipse(25143.744000, 14101.683000, 1160.256033, 606.624017, 150.743000, X, Y) && !ellipse(23219.018000, 14462.642000, 648.752019, 648.752019, 0.000000, X, Y) && !ellipse(20393.442060, 18032.978600, 540.576816, 244.872007, 19.666300, X, Y) && !ellipse(22193.416000, 17583.564000, 745.256821, 263.919208, 353.582110, X, Y) && !ellipse(23978.428920, 14687.878600, 371.283211, 272.263208, 359.886034, X, Y) && !ellipse(20328.678604, 14202.555603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.778000, 13913.982000, 1194.864034, 744.812821, 346.605000, X, Y) && !ellipse(24777.335510, 17366.636322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21424.246200, 14118.448200, 538.942416, 249.822407, 4.807950, X, Y) && !ellipse(21354.149155, 17168.567154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.739105, 15152.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.815000, 14922.778000, 1795.688052, 890.832026, 75.138500, X, Y) && !ellipse(23966.924000, 15799.688000, 1754.736050, 1299.440037, 7.771280, X, Y) && !ellipse(23457.074402, 13699.042572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.640198, 15251.970535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.177560, 15033.363200, 659.070419, 255.508807, 40.036500, X, Y)
[Tue Jun 18 07:49:41 2013] Writing fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55.gif
[Tue Jun 18 08:13:53 2013] Mean detx,y = (4553.29, 7516.36) 
[Tue Jun 18 08:13:54 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 08:14:08 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 08:14:09 2013] Setting source spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Tue Jun 18 08:14:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Tue Jun 18 09:40:48 2013] Not generating rmf since there are only 96 counts
[Tue Jun 18 09:40:48 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:28 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:28 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 364.00
[Tue Jun 18 09:58:28 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55_bgd.pi.gz = 662.00
[Tue Jun 18 09:58:28 2013] Got source and background scale factors 1216412.000000, 3705422.000000
[Tue Jun 18 09:58:28 2013] User source parameters:
  Position = (262.2, 193.0) = 0 42 49.00 41 18 12.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 146.7 +/- 20.1
  Background aperture counts = 217.3
  Rate = 0.006 +/- 0.0009

[Tue Jun 18 09:58:28 2013] Updating counts from extracted products
[Tue Jun 18 09:58:28 2013] Set source signif. to 146.68/14.74 = 9.95
[Tue Jun 18 09:58:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:37 2013] Using photon index=1.80, rate=0.0063, arf fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55.arf
[Tue Jun 18 09:58:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:37 2013] Updating source flux to 1.3e-13
[Tue Jun 18 09:59:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:41 2013] xmm0700380601/analysis//spectral/fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete