[Sun Jun 16 18:56:01 2013] Detection parameters:
  Position = (246.0, 197.9) = 0 42 55.25 41 18 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.5 +/- 17.0
  Background counts = 29.8
  Rate = 0.01 +/- 0.001

[Sun Jun 16 18:56:02 2013] Off-axis axis estimate = 8.22'
[Mon Jun 17 05:28:44 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 05:28:44 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Mon Jun 17 05:28:44 2013] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.966
[Mon Jun 17 05:28:44 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 10.54"
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src35.ximg exists
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon Jun 17 09:20:50 2013] Fit fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src35 appears to have run properly
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon Jun 17 09:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src35.csv
[Mon Jun 17 09:20:52 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Jun 17 09:20:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src35.csv
[Mon Jun 17 09:20:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:44 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 13.806616 pixels away
[Mon Jun 17 09:21:44 2013] Warning, spatial fit 35 centroid is now closest to src. 7
[Mon Jun 17 09:21:44 2013] Source 53 is offset by -6.694584 and -5.676010 pixels which is larger than
2 X fitted extent = 5.666437 x 1.744584, not incorporating fit results
[Mon Jun 17 09:21:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:44 2013] Assessing source extent using major
[Mon Jun 17 09:21:44 2013] Source does appear to be extended
[Mon Jun 17 09:21:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 20:13:34 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 20:13:34 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Mon Jun 17 20:13:34 2013] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.966
[Mon Jun 17 20:13:34 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 10.54"
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src34.ximg exists
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src34_1.ximg exists
[Mon Jun 17 23:37:08 2013] Fit fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src34 appears to have run properly
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src34.csv
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src34.csv
[Mon Jun 17 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:58 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 12.528860 pixels away
[Mon Jun 17 23:37:58 2013] Warning, spatial fit 34 centroid is now closest to src. 7
[Mon Jun 17 23:37:58 2013] Source 53 is offset by -6.395872 and -5.709366 pixels which is larger than
2 X fitted extent = 1.756483 x 6.256690, not incorporating fit results
[Mon Jun 17 23:37:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:58 2013] Assessing source extent using major
[Mon Jun 17 23:37:58 2013] Source does appear to be extended
[Mon Jun 17 23:37:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 07:49:41 2013] XMMSAS src. selection expression = ellipse(21354.149155, 17168.567154, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 07:49:41 2013] Writing source region out to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53_src.reg
[Tue Jun 18 07:49:41 2013] Extracting stamp from image fullrun_mos2_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (209, 160) - (284, 235)
[Tue Jun 18 07:49:41 2013] XMMSAS bgd. selection expression = annulus(21354.149155, 17168.567154, 1087.500000, 2175.000000, X, Y) && !ellipse(23219.018000, 14462.642000, 648.752019, 648.752019, 0.000000, X, Y) && !ellipse(20393.442060, 18032.978600, 540.576816, 244.872007, 19.666300, X, Y) && !ellipse(22193.416000, 17583.564000, 745.256821, 263.919208, 353.582110, X, Y) && !ellipse(19459.639725, 16566.689270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20328.678604, 14202.555603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.778000, 13913.982000, 1194.864034, 744.812821, 346.605000, X, Y) && !ellipse(24241.739105, 15152.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.764709, 16742.987198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23966.924000, 15799.688000, 1754.736050, 1299.440037, 7.771280, X, Y) && !ellipse(22461.640198, 15251.970535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.177560, 15033.363200, 659.070419, 255.508807, 40.036500, X, Y)
[Tue Jun 18 07:49:41 2013] Writing fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53.gif
[Tue Jun 18 08:11:53 2013] Mean detx,y = (3224.45, 7866.70) 
[Tue Jun 18 08:11:54 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 08:12:22 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 08:12:23 2013] Setting source spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Jun 18 08:12:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Tue Jun 18 09:35:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 09:35:32 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:27 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:27 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 550.00
[Tue Jun 18 09:58:27 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53_bgd.pi.gz = 978.00
[Tue Jun 18 09:58:27 2013] Got source and background scale factors 1249108.000000, 5715176.000000
[Tue Jun 18 09:58:27 2013] User source parameters:
  Position = (246.0, 197.9) = 0 42 55.25 41 18 33.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 336.2 +/- 24.5
  Background aperture counts = 213.8
  Rate = 0.01 +/- 0.001

[Tue Jun 18 09:58:27 2013] Updating counts from extracted products
[Tue Jun 18 09:58:27 2013] Set source signif. to 336.25/14.62 = 23.00
[Tue Jun 18 09:58:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:37 2013] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53.arf
[Tue Jun 18 09:58:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:37 2013] Updating source flux to 2.9e-13
[Tue Jun 18 09:59:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:41 2013] xmm0700380601/analysis//spectral/fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete