[Sun Jun 16 18:56:01 2013] Detection parameters:
  Position = (285.4, 200.2) = 0 42 40.06 41 18 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.8 +/- 21.9
  Background counts = 28.0
  Rate = 0.02 +/- 0.002

[Sun Jun 16 18:56:02 2013] Off-axis axis estimate = 7.19'
[Mon Jun 17 05:28:44 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 05:28:44 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Mon Jun 17 05:28:44 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.954
[Mon Jun 17 05:28:44 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.02"
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src24.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src24.csv
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src24.csv
[Mon Jun 17 09:20:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Jun 17 09:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src24.csv
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jun 17 09:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src24.csv
[Mon Jun 17 09:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:44 2013] Warning, spatial fit 24 centroid is now closest to src. 59
[Mon Jun 17 09:21:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:44 2013] Assessing source extent using major
[Mon Jun 17 09:21:44 2013] Source does appear to be extended
[Mon Jun 17 09:21:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 20:13:34 2013] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 20:13:34 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Mon Jun 17 20:13:34 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.954
[Mon Jun 17 20:13:34 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 10.02"
[Mon Jun 17 23:37:07 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src23.ximg exists
[Mon Jun 17 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src23.csv
[Mon Jun 17 23:37:07 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Jun 17 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src23.csv
[Mon Jun 17 23:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jun 17 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:58 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 12.726843 pixels away
[Mon Jun 17 23:37:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:58 2013] Assessing source extent using major
[Mon Jun 17 23:37:58 2013] Source does appear to be extended
[Mon Jun 17 23:37:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 07:49:40 2013] XMMSAS src. selection expression = ellipse(24777.335510, 17366.636322, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 07:49:40 2013] Writing source region out to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52_src.reg
[Tue Jun 18 07:49:40 2013] Extracting stamp from image fullrun_mos2_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (248, 163) - (323, 238)
[Tue Jun 18 07:49:40 2013] XMMSAS bgd. selection expression = annulus(24777.335510, 17366.636322, 1087.500000, 2175.000000, X, Y) && !ellipse(25143.744000, 14101.683000, 1160.256033, 606.624017, 150.743000, X, Y) && !ellipse(22193.416000, 17583.564000, 745.256821, 263.919208, 353.582110, X, Y) && !ellipse(26810.235687, 14426.059952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25913.866800, 18986.469920, 343.770410, 343.770410, 0.000000, X, Y) && !ellipse(24241.739105, 15152.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.764709, 16742.987198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.815000, 14922.778000, 1795.688052, 890.832026, 75.138500, X, Y) && !ellipse(23966.924000, 15799.688000, 1754.736050, 1299.440037, 7.771280, X, Y) && !ellipse(22461.640198, 15251.970535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.177560, 15033.363200, 659.070419, 255.508807, 40.036500, X, Y)
[Tue Jun 18 07:49:40 2013] Writing fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52.gif
[Tue Jun 18 08:08:40 2013] Mean detx,y = (5670.92, 5725.51) 
[Tue Jun 18 08:08:42 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 08:09:03 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 08:09:03 2013] Setting source spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Tue Jun 18 08:09:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Tue Jun 18 09:14:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 09:14:49 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:25 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:25 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 443.00
[Tue Jun 18 09:58:25 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52_bgd.pi.gz = 712.00
[Tue Jun 18 09:58:25 2013] Got source and background scale factors 1237520.000000, 5347944.000000
[Tue Jun 18 09:58:25 2013] User source parameters:
  Position = (285.4, 200.2) = 0 42 40.06 41 18 42.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 278.2 +/- 22.1
  Background aperture counts = 164.8
  Rate = 0.01 +/- 0.0009

[Tue Jun 18 09:58:25 2013] Updating counts from extracted products
[Tue Jun 18 09:58:25 2013] Set source signif. to 278.24/12.84 = 21.68
[Tue Jun 18 09:58:36 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:36 2013] Using photon index=1.80, rate=0.0119, arf fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52.arf
[Tue Jun 18 09:58:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:36 2013] Updating source flux to 2.3e-13
[Tue Jun 18 09:59:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:41 2013] xmm0700380601/analysis//spectral/fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete