[Sun Jun 16 18:56:00 2013] Detection parameters:
  Position = (330.3, 157.2) = 0 42 22.72 41 15 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1508.4 +/- 45.3
  Background counts = 23.4
  Rate = 0.06 +/- 0.002

[Sun Jun 16 18:56:02 2013] Off-axis axis estimate = 10.50'
[Mon Jun 17 05:28:44 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 05:28:44 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Mon Jun 17 05:28:44 2013] source mask rpix=2.7, npix_max = 40, mask sum = 21, frac = 0.518
[Mon Jun 17 05:28:44 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.68"
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 17 09:20:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 17 09:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 17 09:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 17 09:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:44 2013] Warning, spatial fit 5 centroid is now closest to src. 14
[Mon Jun 17 09:21:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:44 2013] Assessing source extent using major
[Mon Jun 17 09:21:44 2013] Source does appear to be extended
[Mon Jun 17 09:21:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:21:44 2013] Source is confused with source 14
[Mon Jun 17 20:13:34 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 20:13:34 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Mon Jun 17 20:13:34 2013] source mask rpix=2.7, npix_max = 40, mask sum = 21, frac = 0.518
[Mon Jun 17 20:13:34 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.68"
[Mon Jun 17 23:37:07 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 17 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src5.csv
[Mon Jun 17 23:37:07 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 17 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src5.csv
[Mon Jun 17 23:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon Jun 17 23:37:08 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 17 23:37:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon Jun 17 23:37:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:58 2013] Spatial fit model total counts = 2019.860000, observed total counts = 1784.000000
[Mon Jun 17 23:37:58 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 23:37:58 2013] Spatial fit model total counts = 1895.030000, observed total counts = 1766.000000
[Mon Jun 17 23:37:58 2013] Offset between fit and detection position for source 18 = 0.560883 pixels
[Mon Jun 17 23:37:58 2013] Warning, changing simple spatial fit ID from 5 to 27
[Mon Jun 17 23:37:58 2013] 1847.197000 total counts/ 892.328000 bgd. counts: snr = 31.965502
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.560883 pixels
  Position = (330.6, 156.8) = 0 42 22.61 41 15 33.2
  Extent = 5.2 (4.7-5.8)" x 4.3 (3.9-4.7)", rotation angle = 349 (332-10) degrees
  Source counts = 954.9 +/- 43.0
  Background counts = 892.3
  Rate = 0.04 +/- 0.002
[Mon Jun 17 23:37:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:58 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 23:37:58 2013] Source does appear to be extended
[Mon Jun 17 23:37:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Tue Jun 18 07:49:39 2013] XMMSAS src. selection expression = ellipse(28712.978000, 13588.794000, 309.903609, 258.142807, 348.921200, X, Y)
[Tue Jun 18 07:49:39 2013] Writing source region out to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18_src.reg
[Tue Jun 18 07:49:39 2013] Extracting stamp from image fullrun_mos2_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (313, 139) - (348, 175)
[Tue Jun 18 07:49:39 2013] XMMSAS bgd. selection expression = annulus(28712.978000, 13588.794000, 516.506015, 1033.012030, X, Y) && !ellipse(26810.235687, 14426.059952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.774353, 14051.076889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.815000, 14922.778000, 1795.688052, 890.832026, 75.138500, X, Y) && !ellipse(28826.974000, 11930.517400, 1118.744032, 603.288017, 17.182700, X, Y)
[Tue Jun 18 07:49:39 2013] Writing fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18.gif
[Tue Jun 18 07:56:30 2013] Mean detx,y = (11159.75, 6132.80) 
[Tue Jun 18 07:56:33 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 07:56:54 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 07:56:54 2013] Setting source spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jun 18 07:56:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Jun 18 09:58:20 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:20 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 1081.00
[Tue Jun 18 09:58:20 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18_bgd.pi.gz = 209.00
[Tue Jun 18 09:58:20 2013] Got source and background scale factors 206022.000000, 1107093.000000
[Tue Jun 18 09:58:20 2013] User source parameters:
  Position = (330.6, 156.8) = 0 42 22.61 41 15 33.2
  Extent = 5.2 (4.7-5.8)" x 4.3 (3.9-4.7)", rotation angle = 349 (332-10) degrees
  Source aperture counts = 1042.1 +/- 33.9
  Background aperture counts = 38.9
  Rate = 0.04 +/- 0.001

[Tue Jun 18 09:58:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:35 2013] Using photon index=1.80, rate=0.041, arf fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18.arf
[Tue Jun 18 09:58:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:35 2013] Updating source flux to 2.8e-12
[Tue Jun 18 09:59:11 2013] Flag p found in src. 18 procflags, skipping spectral fitting
[Tue Jun 18 09:59:11 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Tue Jun 18 09:59:41 2013] xmm0700380601/analysis//spectral/fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete