[Sun Jun 16 18:56:00 2013] Detection parameters:
  Position = (308.7, 166.4) = 0 42 31.04 41 16 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 648.1 +/- 29.9
  Background counts = 31.3
  Rate = 0.03 +/- 0.001

[Sun Jun 16 18:56:02 2013] Off-axis axis estimate = 9.60'
[Mon Jun 17 05:28:44 2013] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 05:28:44 2013] Initial guess for spatial extent in simple fitting = 11.23"
[Mon Jun 17 05:28:44 2013] source mask rpix=2.6, npix_max = 37, mask sum = 30, frac = 0.790
[Mon Jun 17 05:28:44 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 11.23"
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src20.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src20.csv
[Mon Jun 17 09:20:50 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Jun 17 09:20:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src20.csv
[Mon Jun 17 09:20:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Jun 17 09:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Jun 17 09:20:51 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Jun 17 09:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Jun 17 09:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:44 2013] Warning, spatial fit 20 centroid is now closest to src. 63
[Mon Jun 17 09:21:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:44 2013] Assessing source extent using major
[Mon Jun 17 09:21:44 2013] Source does appear to be extended
[Mon Jun 17 09:21:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:21:44 2013] Source is confused with source 63
[Mon Jun 17 20:13:34 2013] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 20:13:34 2013] Initial guess for spatial extent in simple fitting = 11.23"
[Mon Jun 17 20:13:34 2013] source mask rpix=2.6, npix_max = 37, mask sum = 30, frac = 0.790
[Mon Jun 17 20:13:34 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.23"
[Mon Jun 17 23:37:07 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jun 17 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src19.csv
[Mon Jun 17 23:37:07 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jun 17 23:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src19.csv
[Mon Jun 17 23:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Jun 17 23:37:09 2013] fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jun 17 23:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Jun 17 23:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:58 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.567949 pixels away
[Mon Jun 17 23:37:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:58 2013] Assessing source extent using major
[Mon Jun 17 23:37:58 2013] Source does appear to be extended
[Mon Jun 17 23:37:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 07:49:40 2013] XMMSAS src. selection expression = ellipse(26810.235687, 14426.059952, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 07:49:40 2013] Writing source region out to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13_src.reg
[Tue Jun 18 07:49:40 2013] Extracting stamp from image fullrun_mos2_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (271, 129) - (346, 204)
[Tue Jun 18 07:49:40 2013] XMMSAS bgd. selection expression = annulus(26810.235687, 14426.059952, 1087.500000, 2175.000000, X, Y) && !ellipse(25143.744000, 14101.683000, 1160.256033, 606.624017, 150.743000, X, Y) && !ellipse(28712.978000, 13588.794000, 413.204812, 344.190410, 348.921200, X, Y) && !ellipse(24384.778000, 13913.982000, 1194.864034, 744.812821, 346.605000, X, Y) && !ellipse(24777.335510, 17366.636322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.774353, 14051.076889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.739105, 15152.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.626404, 12565.943771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.815000, 14922.778000, 1795.688052, 890.832026, 75.138500, X, Y) && !ellipse(23966.924000, 15799.688000, 1754.736050, 1299.440037, 7.771280, X, Y) && !ellipse(24910.762460, 12218.304200, 386.847211, 207.620006, 359.803372, X, Y) && !ellipse(24041.772919, 13210.024673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28826.974000, 11930.517400, 1118.744032, 603.288017, 17.182700, X, Y) && !ellipse(29487.994690, 11661.582382, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 07:49:40 2013] Writing fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13.gif
[Tue Jun 18 08:07:04 2013] Mean detx,y = (9069.22, 6760.51) 
[Tue Jun 18 08:07:05 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 08:07:30 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 08:07:30 2013] Setting source spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jun 18 08:07:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jun 18 09:06:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 09:06:58 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:24 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:24 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 860.00
[Tue Jun 18 09:58:24 2013] Total counts from fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13_bgd.pi.gz = 943.00
[Tue Jun 18 09:58:24 2013] Got source and background scale factors 983348.000000, 5135858.000000
[Tue Jun 18 09:58:24 2013] User source parameters:
  Position = (308.7, 166.4) = 0 42 31.04 41 16 18.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 679.4 +/- 30.3
  Background aperture counts = 180.6
  Rate = 0.03 +/- 0.001

[Tue Jun 18 09:58:24 2013] Updating counts from extracted products
[Tue Jun 18 09:58:24 2013] Set source signif. to 679.45/13.44 = 50.57
[Tue Jun 18 09:58:36 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:36 2013] Using photon index=1.80, rate=0.0292, arf fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13.arf
[Tue Jun 18 09:58:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:36 2013] Updating source flux to 8.4e-13
[Tue Jun 18 09:59:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:41 2013] xmm0700380601/analysis//spectral/fullrun_mos2_xmm0700380601_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete