[Sun Jun 16 18:55:19 2013] Detection parameters:
  Position = (246.0, 199.2) = 0 42 55.26 41 18 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.8 +/- 17.5
  Background counts = 24.7
  Rate = 0.006 +/- 0.0007

[Sun Jun 16 18:55:20 2013] Off-axis axis estimate = 8.14'
[Mon Jun 17 00:28:36 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:28:36 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Mon Jun 17 00:28:36 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.795
[Mon Jun 17 00:28:36 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 10.50"
[Mon Jun 17 05:28:42 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jun 17 05:28:42 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src49.csv
[Mon Jun 17 05:28:42 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jun 17 05:28:42 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src49.csv
[Mon Jun 17 05:28:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:28:43 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jun 17 05:28:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 17 05:28:43 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jun 17 05:28:43 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 17 05:28:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:30 2013] Source 57 is offset by 7.267899 and -4.162190 pixels which is larger than
2 X fitted extent = 5.375035 x 9.653655, not incorporating fit results
[Mon Jun 17 09:21:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:31 2013] Assessing source extent using major
[Mon Jun 17 09:21:31 2013] Source does appear to be extended
[Mon Jun 17 09:21:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:47:40 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 16:47:40 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Mon Jun 17 16:47:40 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.795
[Mon Jun 17 16:47:40 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 10.50"
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src48.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src48.csv
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src48.csv
[Mon Jun 17 20:13:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 20:13:34 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Jun 17 20:13:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jun 17 20:13:34 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Jun 17 20:13:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jun 17 20:13:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:46 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 13.478736 pixels away
[Mon Jun 17 23:37:46 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 12.121026 pixels away
[Mon Jun 17 23:37:46 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 10.333674 pixels away
[Mon Jun 17 23:37:46 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:46 2013] Assessing source extent using major
[Mon Jun 17 23:37:46 2013] Source does appear to be extended
[Mon Jun 17 23:37:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 05:53:28 2013] XMMSAS src. selection expression = ellipse(21352.001236, 17279.673492, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 05:53:28 2013] Writing source region out to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57_src.reg
[Tue Jun 18 05:53:28 2013] Extracting stamp from image fullrun_mos1_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (208, 162) - (283, 237)
[Tue Jun 18 05:53:28 2013] XMMSAS bgd. selection expression = annulus(21352.001236, 17279.673492, 1087.500000, 2175.000000, X, Y) && !ellipse(21999.858000, 17691.116000, 521.253615, 521.253615, 0.000000, X, Y) && !ellipse(23260.470000, 14575.566000, 631.302418, 631.302418, 0.000000, X, Y) && !ellipse(19448.935974, 16583.147797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20393.642720, 18093.721200, 646.508019, 444.928013, 22.618600, X, Y) && !ellipse(23693.490020, 16093.499200, 397.712811, 397.712811, 0.000000, X, Y) && !ellipse(23039.300000, 16334.860000, 1669.912048, 1669.912048, 0.000000, X, Y) && !ellipse(22064.774384, 15093.031189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.197723, 15281.957764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19619.569397, 19751.611969, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 05:53:28 2013] Writing fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57.gif
[Tue Jun 18 06:11:40 2013] Mean detx,y = (7939.88, -3371.11) 
[Tue Jun 18 06:11:41 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 06:12:03 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 06:12:03 2013] Setting source spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jun 18 06:12:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Jun 18 07:43:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 07:43:13 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:10 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:10 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 690.00
[Tue Jun 18 09:58:10 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57_bgd.pi.gz = 797.00
[Tue Jun 18 09:58:10 2013] Got source and background scale factors 1171360.000000, 4905917.000000
[Tue Jun 18 09:58:10 2013] User source parameters:
  Position = (246.0, 199.2) = 0 42 55.26 41 18 34.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 499.7 +/- 27.3
  Background aperture counts = 190.3
  Rate = 0.02 +/- 0.001

[Tue Jun 18 09:58:10 2013] Updating counts from extracted products
[Tue Jun 18 09:58:10 2013] Set source signif. to 499.70/13.79 = 36.22
[Tue Jun 18 09:58:18 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:18 2013] Using photon index=1.80, rate=0.0216, arf fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57.arf
[Tue Jun 18 09:58:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:18 2013] Updating source flux to 4.1e-13
[Tue Jun 18 09:58:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:11 2013] xmm0700380601/analysis//spectral/fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete