[Sun Jun 16 18:55:18 2013] Detection parameters:
  Position = (342.5, 112.8) = 0 42 18.03 41 12 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 550.2 +/- 28.1
  Background counts = 15.3
  Rate = 0.02 +/- 0.001

[Sun Jun 16 18:55:20 2013] Off-axis axis estimate = 13.83'
[Mon Jun 17 00:28:36 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:28:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:28:36 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Mon Jun 17 00:28:36 2013] source mask rpix=3.1, npix_max = 50, mask sum = 44, frac = 0.864
[Mon Jun 17 00:28:36 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 13.34"
[Mon Jun 17 05:28:41 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jun 17 05:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src25.csv
[Mon Jun 17 05:28:41 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jun 17 05:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src25.csv
[Mon Jun 17 05:28:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:28:43 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jun 17 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 17 05:28:43 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jun 17 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 17 05:28:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:30 2013] Warning, spatial fit 25 centroid is now closest to src. 34
[Mon Jun 17 09:21:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:31 2013] Assessing source extent using major
[Mon Jun 17 09:21:31 2013] Source does appear to be extended
[Mon Jun 17 09:21:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:47:40 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 16:47:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 16:47:40 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Mon Jun 17 16:47:40 2013] source mask rpix=3.1, npix_max = 50, mask sum = 44, frac = 0.864
[Mon Jun 17 16:47:40 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 13.34"
[Mon Jun 17 20:13:32 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src24.ximg exists
[Mon Jun 17 20:13:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src24.csv
[Mon Jun 17 20:13:32 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Jun 17 20:13:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src24.csv
[Mon Jun 17 20:13:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Jun 17 20:13:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:46 2013] Warning, spatial fit 24 centroid is now closest to src. 37
[Mon Jun 17 23:37:46 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:46 2013] Assessing source extent using major
[Mon Jun 17 23:37:46 2013] Source does appear to be extended
[Mon Jun 17 23:37:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 05:53:28 2013] XMMSAS src. selection expression = ellipse(29747.006073, 9769.240784, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 05:53:28 2013] Writing source region out to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4_src.reg
[Tue Jun 18 05:53:28 2013] Extracting stamp from image fullrun_mos1_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (305, 75) - (380, 150)
[Tue Jun 18 05:53:28 2013] XMMSAS bgd. selection expression = annulus(29747.006073, 9769.240784, 1087.500000, 2175.000000, X, Y) && !ellipse(27475.081573, 9725.027245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29668.430000, 11712.062000, 552.846416, 246.920807, 345.967300, X, Y) && !ellipse(28828.930000, 11158.938320, 624.124018, 215.952006, 342.456500, X, Y) && !ellipse(30493.456940, 9980.794182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28606.915253, 11805.323013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.438599, 11283.214157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32632.523773, 11157.306030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29173.092285, 12092.266632, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 05:53:28 2013] Writing fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4.gif
[Tue Jun 18 06:04:56 2013] Mean detx,y = (8717.33, -14486.96) 
[Tue Jun 18 06:04:58 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 06:05:16 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 06:05:16 2013] Setting source spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 18 06:05:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun 18 07:09:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 07:09:37 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:05 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:05 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 551.00
[Tue Jun 18 09:58:05 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4_bgd.pi.gz = 245.00
[Tue Jun 18 09:58:05 2013] Got source and background scale factors 1017250.000000, 2790369.000000
[Tue Jun 18 09:58:05 2013] User source parameters:
  Position = (342.5, 112.8) = 0 42 18.03 41 12 20.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 461.7 +/- 24.5
  Background aperture counts = 89.3
  Rate = 0.02 +/- 0.001

[Tue Jun 18 09:58:05 2013] Updating counts from extracted products
[Tue Jun 18 09:58:05 2013] Set source signif. to 461.68/9.45 = 48.85
[Tue Jun 18 09:58:17 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:17 2013] Using photon index=1.80, rate=0.0199, arf fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4.arf
[Tue Jun 18 09:58:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:17 2013] Updating source flux to 8.6e-13
[Tue Jun 18 09:58:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:11 2013] xmm0700380601/analysis//spectral/fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete