[Sun Jun 16 18:55:19 2013] Detection parameters:
  Position = (255.5, 371.1) = 0 42 51.62 41 31 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7542.3 +/- 102.1
  Background counts = 17.8
  Rate = 0.4 +/- 0.006

[Sun Jun 16 18:55:20 2013] Off-axis axis estimate = 6.12'
[Mon Jun 17 00:28:36 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:28:36 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Mon Jun 17 00:28:36 2013] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.008
[Mon Jun 17 00:28:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.49"
[Mon Jun 17 05:28:40 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 17 05:28:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 05:28:40 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 17 05:28:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 05:28:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:28:42 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 17 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 17 05:28:42 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 17 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 17 05:28:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:30 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 12.608957 pixels away
[Mon Jun 17 09:21:30 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:30 2013] Assessing source extent using major
[Mon Jun 17 09:21:30 2013] Source does appear to be extended
[Mon Jun 17 09:21:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:47:40 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 16:47:40 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Mon Jun 17 16:47:40 2013] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.008
[Mon Jun 17 16:47:40 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.49"
[Mon Jun 17 20:13:32 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 17 20:13:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 20:13:32 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 17 20:13:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 20:13:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 17 20:13:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:46 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 12.608957 pixels away
[Mon Jun 17 23:37:46 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:46 2013] Assessing source extent using major
[Mon Jun 17 23:37:46 2013] Source does appear to be extended
[Mon Jun 17 23:37:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 05:53:27 2013] Counts = 7542.297852, rescaling region sizes by 2.000000
[Tue Jun 18 05:53:27 2013] XMMSAS src. selection expression = ellipse(22183.642700, 32239.983002, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 18 05:53:27 2013] Writing source region out to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38_src.reg
[Tue Jun 18 05:53:27 2013] Extracting stamp from image fullrun_mos1_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (181, 296) - (331, 446)
[Tue Jun 18 05:53:27 2013] XMMSAS bgd. selection expression = annulus(22183.642700, 32239.983002, 4350.000000, 8700.000000, X, Y) && !ellipse(24025.082400, 25264.348800, 494.071214, 494.071214, 0.000000, X, Y) && !ellipse(22951.447800, 25332.333600, 430.939036, 430.939036, 0.000000, X, Y) && !ellipse(21436.818360, 26030.531800, 678.288820, 414.999212, 19.665850, X, Y) && !ellipse(19934.762000, 31150.416000, 1504.944043, 390.426411, 46.715300, X, Y) && !ellipse(27971.724200, 25904.402000, 387.770411, 387.770411, 0.000000, X, Y) && !ellipse(27231.738600, 29750.425200, 452.026413, 252.193607, 65.392629, X, Y) && !ellipse(29233.609800, 26953.456600, 653.021587, 653.021587, 0.000000, X, Y) && !ellipse(26747.807983, 26332.813629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20516.995850, 30596.862366, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 05:53:27 2013] Writing fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38.gif
[Tue Jun 18 05:53:33 2013] Mean detx,y = (-3970.51, 5514.06) 
[Tue Jun 18 05:53:34 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 05:55:11 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 05:55:11 2013] Setting source spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jun 18 05:55:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Jun 18 06:18:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 06:18:35 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:57:58 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:57:58 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 7443.00
[Tue Jun 18 09:57:58 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38_bgd.pi.gz = 9389.00
[Tue Jun 18 09:57:58 2013] Got source and background scale factors 4960014.000000, 127355773.000000
[Tue Jun 18 09:57:58 2013] User source parameters:
  Position = (255.5, 371.1) = 0 42 51.62 41 31 7.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 7077.3 +/- 87.3
  Background aperture counts = 365.7
  Rate = 0.3 +/- 0.004

[Tue Jun 18 09:57:58 2013] Updating counts from extracted products
[Tue Jun 18 09:57:58 2013] Set source signif. to 7077.33/19.12 = 370.11
[Tue Jun 18 09:58:16 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:16 2013] Using photon index=1.80, rate=0.305, arf fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38.arf
[Tue Jun 18 09:58:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:16 2013] Updating source flux to 3.9e-12
[Tue Jun 18 09:58:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:11 2013] xmm0700380601/analysis//spectral/fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete