[Sun Jun 16 18:55:19 2013] Detection parameters:
  Position = (351.1, 115.3) = 0 42 14.72 41 12 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.2 +/- 15.6
  Background counts = 14.1
  Rate = 0.006 +/- 0.0007

[Sun Jun 16 18:55:20 2013] Off-axis axis estimate = 13.82'
[Mon Jun 17 00:28:36 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:28:36 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Mon Jun 17 00:28:36 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.963
[Mon Jun 17 00:28:36 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 13.34"
[Mon Jun 17 05:28:42 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src50.ximg exists
[Mon Jun 17 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src50.csv
[Mon Jun 17 05:28:42 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src50_1.ximg exists
[Mon Jun 17 05:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src50.csv
[Mon Jun 17 05:28:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:28:43 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Mon Jun 17 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon Jun 17 05:28:43 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Mon Jun 17 05:28:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon Jun 17 05:28:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 09:21:30 2013] Warning, spatial fit 50 centroid is now closest to src. 33
[Mon Jun 17 09:21:31 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 09:21:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 09:21:31 2013] Assessing source extent using major
[Mon Jun 17 09:21:31 2013] Source does appear to be extended
[Mon Jun 17 09:21:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:47:40 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 16:47:40 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Mon Jun 17 16:47:40 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.963
[Mon Jun 17 16:47:40 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 13.34"
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src49.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src49.csv
[Mon Jun 17 20:13:33 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon Jun 17 20:13:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src49.csv
[Mon Jun 17 20:13:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 20:13:34 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon Jun 17 20:13:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon Jun 17 20:13:34 2013] fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Jun 17 20:13:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon Jun 17 20:13:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0700380601_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 23:37:46 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 10.716872 pixels away
[Mon Jun 17 23:37:46 2013] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 12.076592 pixels away
[Mon Jun 17 23:37:46 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 23:37:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 23:37:46 2013] Assessing source extent using major
[Mon Jun 17 23:37:46 2013] Source does appear to be extended
[Mon Jun 17 23:37:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 05:53:28 2013] XMMSAS src. selection expression = ellipse(30493.456940, 9980.794182, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 05:53:28 2013] Writing source region out to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37_src.reg
[Tue Jun 18 05:53:28 2013] Extracting stamp from image fullrun_mos1_xmm0700380601_pi300-10000_cl_sm2.00.img.gz, (314, 78) - (389, 153)
[Tue Jun 18 05:53:28 2013] XMMSAS bgd. selection expression = annulus(30493.456940, 9980.794182, 1087.500000, 2175.000000, X, Y) && !ellipse(27475.081573, 9725.027245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29747.006073, 9769.240784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29668.430000, 11712.062000, 552.846416, 246.920807, 345.967300, X, Y) && !ellipse(28828.930000, 11158.938320, 624.124018, 215.952006, 342.456500, X, Y) && !ellipse(28606.915253, 11805.323013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.438599, 11283.214157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32632.523773, 11157.306030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29173.092285, 12092.266632, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 05:53:28 2013] Writing fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37.gif
[Tue Jun 18 06:12:06 2013] Mean detx,y = (8255.70, -14764.79) 
[Tue Jun 18 06:12:07 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 06:12:24 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 06:12:24 2013] Setting source spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun 18 06:12:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jun 18 07:43:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 07:43:22 2013] rmf not generated due to insufficient counts
[Tue Jun 18 09:58:10 2013] Updating aperture counts using extracted products
[Tue Jun 18 09:58:11 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 297.00
[Tue Jun 18 09:58:11 2013] Total counts from fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37_bgd.pi.gz = 308.00
[Tue Jun 18 09:58:11 2013] Got source and background scale factors 958762.000000, 3644049.000000
[Tue Jun 18 09:58:11 2013] User source parameters:
  Position = (351.1, 115.3) = 0 42 14.72 41 12 32.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 216.0 +/- 18.3
  Background aperture counts = 81.0
  Rate = 0.009 +/- 0.0008

[Tue Jun 18 09:58:11 2013] Updating counts from extracted products
[Tue Jun 18 09:58:11 2013] Set source signif. to 215.96/9.00 = 23.99
[Tue Jun 18 09:58:18 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 09:58:18 2013] Using photon index=1.80, rate=0.00932, arf fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37.arf
[Tue Jun 18 09:58:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 09:58:19 2013] Updating source flux to 4.3e-13
[Tue Jun 18 09:58:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 09:59:11 2013] xmm0700380601/analysis//spectral/fullrun_mos1_xmm0700380601_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete