[Sun Aug 4 10:57:14 2013] Detection parameters: Position = (268.2, 261.9) = 22 19 17.27 12 6 28.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 141.9 +/- 28.8 Background counts = 328.4 Rate = 0.002 +/- 0.0003 [Sun Aug 4 10:57:15 2013] Off-axis axis estimate = 3.44' [Sun Aug 4 11:01:56 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting [Sun Aug 4 11:01:56 2013] Initial guess for spatial extent in simple fitting = 8.15" [Sun Aug 4 11:01:56 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.844 [Sun Aug 4 11:01:56 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 8.15" [Sun Aug 4 13:06:57 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_src70.ximg exists [Sun Aug 4 13:06:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_src70.csv [Sun Aug 4 13:06:57 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_src70_1.ximg exists [Sun Aug 4 13:06:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_src70.csv [Sun Aug 4 13:06:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_src70_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 4 13:06:58 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists [Sun Aug 4 13:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_tfrozen_src70.csv [Sun Aug 4 13:06:58 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists [Sun Aug 4 13:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_tfrozen_src70.csv [Sun Aug 4 13:06:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694580101_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 4 13:48:44 2013] Source 74 is offset by -4.596978 and 6.367526 pixels which is larger than 2 X fitted extent = 6.110851 x 6.110851, not incorporating fit results [Sun Aug 4 13:48:45 2013] Vigneting correction estimate = 1.000000 [Sun Aug 4 13:48:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 4 13:48:45 2013] Assessing source extent using major [Sun Aug 4 13:48:45 2013] Source does appear to be extended [Sun Aug 4 13:48:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 4 13:49:01 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting [Sun Aug 4 13:49:01 2013] Initial guess for spatial extent in simple fitting = 8.15" [Sun Aug 4 13:49:01 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.844 [Sun Aug 4 13:49:01 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 8.15" [Sun Aug 4 15:56:57 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_src70.ximg exists [Sun Aug 4 15:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_src70.csv [Sun Aug 4 15:56:57 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_src70_1.ximg exists [Sun Aug 4 15:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_src70.csv [Sun Aug 4 15:56:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_src70_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 4 15:56:58 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists [Sun Aug 4 15:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_tfrozen_src70.csv [Sun Aug 4 15:56:58 2013] fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists [Sun Aug 4 15:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_tfrozen_src70.csv [Sun Aug 4 15:56:58 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694580101_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 4 16:26:43 2013] Source 74 is offset by 6.894010 and -4.700130 pixels which is larger than 2 X fitted extent = 0.936474 x 7.491816, not incorporating fit results [Sun Aug 4 16:26:44 2013] Vigneting correction estimate = 1.000000 [Sun Aug 4 16:26:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 4 16:26:44 2013] Assessing source extent using major [Sun Aug 4 16:26:44 2013] Source does appear to be extended [Sun Aug 4 16:26:44 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 4 16:27:01 2013] XMMSAS src. selection expression = ellipse(23289.050873, 22734.688721, 652.500000, 652.500000, 0.000000, X, Y) [Sun Aug 4 16:27:01 2013] Writing source region out to fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74_src.reg [Sun Aug 4 16:27:01 2013] Extracting stamp from image fullrun_pn_xmm0694580101_pi300-10000_cl_sm2.00.img.gz, (231, 224) - (306, 299) [Sun Aug 4 16:27:01 2013] XMMSAS bgd. selection expression = annulus(23289.050873, 22734.688721, 1087.500000, 2175.000000, X, Y) && !ellipse(22847.506226, 23988.828979, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22917.472000, 25096.870000, 1836.552053, 1282.040037, 322.687000, X, Y) && !ellipse(21814.390518, 22457.546143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.808167, 23555.652985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21004.843866, 21416.922800, 426.150412, 426.150412, 0.000000, X, Y) && !ellipse(20884.633774, 20633.679077, 870.000000, 870.000000, 0.000000, X, Y) [Sun Aug 4 16:27:01 2013] Writing fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74.gif [Sun Aug 4 17:54:40 2013] Mean detx,y = (183.02, -2399.31) [Sun Aug 4 17:54:43 2013] Setting backscal keywords in source and bgd. spectrum [Sun Aug 4 17:54:52 2013] Binned source spectrum to 10 counts/bin [Sun Aug 4 17:54:52 2013] Setting source spectrum file to fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74_src_b10.pi.gz [Sun Aug 4 17:54:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74_bgd.pi.gz [Sun Aug 4 20:40:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Aug 4 20:40:40 2013] rmf not generated due to insufficient counts [Sun Aug 4 21:40:20 2013] Updating aperture counts using extracted products [Sun Aug 4 21:40:20 2013] Total counts from fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 1913.00 [Sun Aug 4 21:40:20 2013] Total counts from fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74_bgd.pi.gz = 3115.00 [Sun Aug 4 21:40:20 2013] Got source and background scale factors 1093788.000000, 3176388.000000 [Sun Aug 4 21:40:20 2013] User source parameters: Position = (268.2, 261.9) = 22 19 17.27 12 6 28.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 840.4 +/- 44.7 Background aperture counts = 1072.6 Rate = 0.008 +/- 0.0004 [Sun Aug 4 21:40:20 2013] Updating counts from extracted products [Sun Aug 4 21:40:20 2013] Set source signif. to 840.35/32.75 = 25.66 [Sun Aug 4 21:40:24 2013] Calculating source flux in energy range 0.30-8.00 [Sun Aug 4 21:40:24 2013] Using photon index=1.80, rate=0.00801, arf fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74.arf [Sun Aug 4 21:40:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Aug 4 21:40:24 2013] Updating source flux to 2.7e-14 [Sun Aug 4 21:40:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Aug 4 21:40:54 2013] xmm0694580101/analysis//spectral/fullrun_pn_xmm0694580101_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete