[Mon Aug 5 15:38:50 2013] Detection parameters: Position = (407.9, 432.9) = 15 58 43.28 27 10 31.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 151.0 +/- 22.6 Background counts = 129.6 Rate = 0.005 +/- 0.0007 [Mon Aug 5 15:38:51 2013] Off-axis axis estimate = 12.57' [Mon Aug 5 15:40:28 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting [Mon Aug 5 15:40:28 2013] Initial guess for spatial extent in simple fitting = 12.71" [Mon Aug 5 15:40:28 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.046 [Mon Aug 5 15:40:28 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.71" [Mon Aug 5 17:38:29 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src5.ximg exists [Mon Aug 5 17:38:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src5.csv [Mon Aug 5 17:38:29 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src5_1.ximg exists [Mon Aug 5 17:38:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src5.csv [Mon Aug 5 17:38:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 17:38:30 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Mon Aug 5 17:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src5.csv [Mon Aug 5 17:38:30 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Mon Aug 5 17:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src5.csv [Mon Aug 5 17:38:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 18:14:32 2013] Warning, spatial fit 5 centroid is now closest to src. 6 [Mon Aug 5 18:14:32 2013] Spatial fit model total counts = 2853.720000, observed total counts = 1722.000000 [Mon Aug 5 18:14:32 2013] Poor agreement between spatial fit and data for source 5 It may help to tweak spatial fit manually Not incorporating fit results [Mon Aug 5 18:14:33 2013] Vigneting correction estimate = 1.000000 [Mon Aug 5 18:14:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 5 18:14:33 2013] Assessing source extent using major [Mon Aug 5 18:14:33 2013] Source does appear to be extended [Mon Aug 5 18:14:33 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 5 18:14:33 2013] Source is confused with source 23 [Mon Aug 5 18:14:48 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting [Mon Aug 5 18:14:48 2013] Initial guess for spatial extent in simple fitting = 12.71" [Mon Aug 5 18:14:48 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.046 [Mon Aug 5 18:14:48 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.71" [Mon Aug 5 22:57:23 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src5.ximg exists [Mon Aug 5 22:57:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src5.csv [Mon Aug 5 22:57:23 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src5_1.ximg exists [Mon Aug 5 22:57:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src5.csv [Mon Aug 5 22:57:23 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 22:57:24 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Mon Aug 5 22:57:24 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src5.csv [Mon Aug 5 22:57:24 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Mon Aug 5 22:57:24 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src5.csv [Mon Aug 5 22:57:24 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 23:29:02 2013] Warning, spatial fit 5 centroid is now closest to src. 24 [Mon Aug 5 23:29:02 2013] Vigneting correction estimate = 1.000000 [Mon Aug 5 23:29:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 5 23:29:02 2013] Assessing source extent using major [Mon Aug 5 23:29:02 2013] Source does appear to be extended [Mon Aug 5 23:29:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 5 23:29:17 2013] XMMSAS src. selection expression = ellipse(35436.670135, 37615.541168, 652.500000, 652.500000, 0.000000, X, Y) [Mon Aug 5 23:29:17 2013] Writing source region out to fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5_src.reg [Mon Aug 5 23:29:17 2013] Extracting stamp from image fullrun_pn_xmm0694440501_pi300-10000_cl_sm2.00.img.gz, (370, 395) - (445, 470) [Mon Aug 5 23:29:17 2013] XMMSAS bgd. selection expression = annulus(35436.670135, 37615.541168, 1087.500000, 2175.000000, X, Y) && !ellipse(36088.809052, 36910.184845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37058.096527, 35684.803864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36415.308624, 36047.982666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37402.302490, 35166.191681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36974.391418, 35093.611145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34929.187836, 37268.757172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34438.689758, 36323.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34007.638000, 35584.638000, 3760.384108, 3760.384108, 0.000000, X, Y) && !ellipse(35022.395294, 35174.493958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35895.525574, 35189.797546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35251.091553, 34783.243530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37697.576263, 34732.524506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34475.509705, 34655.656097, 870.000000, 870.000000, 0.000000, X, Y) [Mon Aug 5 23:29:17 2013] Writing fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5.gif [Mon Aug 5 23:32:25 2013] Mean detx,y = (13388.99, -2454.97) [Mon Aug 5 23:32:27 2013] Setting backscal keywords in source and bgd. spectrum [Mon Aug 5 23:32:37 2013] Binned source spectrum to 10 counts/bin [Mon Aug 5 23:32:37 2013] Setting source spectrum file to fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Mon Aug 5 23:32:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5_bgd.pi.gz [Mon Aug 5 23:50:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Aug 5 23:50:38 2013] rmf not generated due to insufficient counts [Tue Aug 6 00:21:40 2013] Updating aperture counts using extracted products [Tue Aug 6 00:21:40 2013] Total counts from fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 1219.00 [Tue Aug 6 00:21:40 2013] Total counts from fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5_bgd.pi.gz = 63.00 [Tue Aug 6 00:21:40 2013] Got source and background scale factors 1162923.000000, 97451.000000 [Tue Aug 6 00:21:40 2013] User source parameters: Position = (407.9, 432.9) = 15 58 43.28 27 10 31.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 467.2 +/- 35.9 Background aperture counts = 751.8 Rate = 0.02 +/- 0.001 [Tue Aug 6 00:21:40 2013] Updating counts from extracted products [Tue Aug 6 00:21:40 2013] Set source signif. to 467.20/27.42 = 17.04 [Tue Aug 6 00:21:47 2013] Calculating source flux in energy range 0.30-8.00 [Tue Aug 6 00:21:47 2013] Using photon index=1.80, rate=0.0152, arf fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5.arf [Tue Aug 6 00:21:47 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Aug 6 00:21:47 2013] Updating source flux to 9.4e-14 [Tue Aug 6 00:21:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Aug 6 00:21:59 2013] xmm0694440501/analysis//spectral/fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete