[Mon Aug 5 15:38:49 2013] Detection parameters: Position = (449.3, 381.4) = 15 58 29.81 27 6 46.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 215.7 +/- 18.7 Background counts = 67.0 Rate = 0.007 +/- 0.0006 [Mon Aug 5 15:38:51 2013] Off-axis axis estimate = 12.48' [Mon Aug 5 15:40:28 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting [Mon Aug 5 15:40:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Aug 5 15:40:28 2013] Initial guess for spatial extent in simple fitting = 12.67" [Mon Aug 5 15:40:28 2013] source mask rpix=2.9, npix_max = 46, mask sum = 28, frac = 0.601 [Mon Aug 5 15:40:28 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.67" [Mon Aug 5 17:38:29 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src2.ximg exists [Mon Aug 5 17:38:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src2.csv [Mon Aug 5 17:38:29 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src2_1.ximg exists [Mon Aug 5 17:38:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src2.csv [Mon Aug 5 17:38:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 17:38:30 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Mon Aug 5 17:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src2.csv [Mon Aug 5 17:38:30 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Mon Aug 5 17:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src2.csv [Mon Aug 5 17:38:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 18:14:32 2013] Spatial fit model total counts = -301.561000, observed total counts = 860.000000 [Mon Aug 5 18:14:32 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Mon Aug 5 18:14:33 2013] Vigneting correction estimate = 1.000000 [Mon Aug 5 18:14:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 5 18:14:33 2013] Assessing source extent using major [Mon Aug 5 18:14:33 2013] Source does appear to be extended [Mon Aug 5 18:14:33 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 5 18:14:48 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting [Mon Aug 5 18:14:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Aug 5 18:14:48 2013] Initial guess for spatial extent in simple fitting = 12.67" [Mon Aug 5 18:14:48 2013] source mask rpix=2.9, npix_max = 46, mask sum = 28, frac = 0.601 [Mon Aug 5 18:14:48 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.67" [Mon Aug 5 22:57:23 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src2.ximg exists [Mon Aug 5 22:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src2.csv [Mon Aug 5 22:57:23 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src2_1.ximg exists [Mon Aug 5 22:57:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src2.csv [Mon Aug 5 22:57:23 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 22:57:24 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Mon Aug 5 22:57:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src2.csv [Mon Aug 5 22:57:24 2013] fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Mon Aug 5 22:57:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src2.csv [Mon Aug 5 22:57:24 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0694440501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 5 23:29:02 2013] Source 2 is offset by -6.846613 and -0.622215 pixels which is larger than 2 X fitted extent = 4.802805 x 2.681370, not incorporating fit results [Mon Aug 5 23:29:02 2013] Source 2 is offset by 5.138789 and 3.432633 pixels which is larger than 2 X fitted extent = 1.420060 x 1.420060, not incorporating fit results [Mon Aug 5 23:29:02 2013] Vigneting correction estimate = 1.000000 [Mon Aug 5 23:29:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 5 23:29:02 2013] Assessing source extent using major [Mon Aug 5 23:29:02 2013] Source does appear to be extended [Mon Aug 5 23:29:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 5 23:29:17 2013] XMMSAS src. selection expression = ellipse(39040.362640, 33137.489105, 652.500000, 652.500000, 0.000000, X, Y) [Mon Aug 5 23:29:17 2013] Writing source region out to fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2_src.reg [Mon Aug 5 23:29:17 2013] Extracting stamp from image fullrun_pn_xmm0694440501_pi300-10000_cl_sm2.00.img.gz, (412, 344) - (487, 419) [Mon Aug 5 23:29:17 2013] XMMSAS bgd. selection expression = annulus(39040.362640, 33137.489105, 1087.500000, 2175.000000, X, Y) && !ellipse(37058.096527, 35684.803864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36415.308624, 36047.982666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37402.302490, 35166.191681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36974.391418, 35093.611145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34007.638000, 35584.638000, 3760.384108, 3760.384108, 0.000000, X, Y) && !ellipse(37697.576263, 34732.524506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38161.030212, 34127.414124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36704.507690, 34255.970642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37348.203613, 34164.950928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37746.043823, 33691.792847, 870.000000, 870.000000, 0.000000, X, Y) [Mon Aug 5 23:29:17 2013] Writing fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2.gif [Mon Aug 5 23:31:18 2013] Mean detx,y = (13614.37, 3254.45) [Mon Aug 5 23:31:19 2013] Setting backscal keywords in source and bgd. spectrum [Mon Aug 5 23:31:31 2013] Binned source spectrum to 10 counts/bin [Mon Aug 5 23:31:32 2013] Setting source spectrum file to fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Mon Aug 5 23:31:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2_bgd.pi.gz [Mon Aug 5 23:50:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Aug 5 23:50:15 2013] rmf not generated due to insufficient counts [Tue Aug 6 00:21:39 2013] Updating aperture counts using extracted products [Tue Aug 6 00:21:39 2013] Total counts from fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 546.00 [Tue Aug 6 00:21:39 2013] Total counts from fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1098.00 [Tue Aug 6 00:21:39 2013] Got source and background scale factors 719866.000000, 3743819.000000 [Tue Aug 6 00:21:39 2013] User source parameters: Position = (449.3, 381.4) = 15 58 29.81 27 6 46.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 334.9 +/- 24.4 Background aperture counts = 211.1 Rate = 0.01 +/- 0.0008 [Tue Aug 6 00:21:39 2013] Updating counts from extracted products [Tue Aug 6 00:21:39 2013] Set source signif. to 334.88/14.53 = 23.05 [Tue Aug 6 00:21:47 2013] Calculating source flux in energy range 0.30-8.00 [Tue Aug 6 00:21:47 2013] Using photon index=1.80, rate=0.0109, arf fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2.arf [Tue Aug 6 00:21:47 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Aug 6 00:21:47 2013] Updating source flux to 1.6e-13 [Tue Aug 6 00:21:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Aug 6 00:21:59 2013] xmm0694440501/analysis//spectral/fullrun_pn_xmm0694440501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete