[Fri Aug 16 19:08:33 2013] Detection parameters:
  Position = (252.4, 387.1) = 15 59 36.10 27 32 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 9.1
  Background counts = 11.9
  Rate = 0.003 +/- 0.0005

[Fri Aug 16 19:08:34 2013] Off-axis axis estimate = 7.24'
[Fri Aug 16 20:37:13 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Fri Aug 16 20:37:13 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Fri Aug 16 20:37:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.570
[Fri Aug 16 20:37:13 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.05"
[Fri Aug 16 21:09:22 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_src14.ximg exists
[Fri Aug 16 21:09:22 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Aug 16 21:09:22 2013] Fit fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_src14 appears to have run properly
[Fri Aug 16 21:09:22 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Aug 16 21:09:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Aug 16 21:09:22 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Aug 16 21:09:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Aug 16 21:09:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0694440201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 16 21:09:42 2013] Source 20 is offset by 0.537525 and 1.450336 pixels which is larger than
2 X fitted extent = 1.155149 x 1.155149, not incorporating fit results
[Fri Aug 16 21:09:42 2013] Vigneting correction estimate = 1.000000
[Fri Aug 16 21:09:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 16 21:09:42 2013] Assessing source extent using major
[Fri Aug 16 21:09:42 2013] Source does appear to be extended
[Fri Aug 16 21:09:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 16 22:37:24 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Fri Aug 16 22:37:24 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Fri Aug 16 22:37:24 2013] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.570
[Fri Aug 16 22:37:24 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.05"
[Fri Aug 16 23:01:54 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Aug 16 23:01:54 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Aug 16 23:01:54 2013] Fit fullrun_mos2_xmm0694440201_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri Aug 16 23:01:54 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Aug 16 23:01:54 2013] fullrun_mos2_xmm0694440201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Aug 16 23:01:54 2013] Fit fullrun_mos2_xmm0694440201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Aug 16 23:02:14 2013] Source 20 is offset by 0.518416 and 1.416267 pixels which is larger than
2 X fitted extent = 1.155149 x 1.155149, not incorporating fit results
[Fri Aug 16 23:02:14 2013] Vigneting correction estimate = 1.000000
[Fri Aug 16 23:02:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 16 23:02:14 2013] Assessing source extent using major
[Fri Aug 16 23:02:14 2013] Source does appear to be extended
[Fri Aug 16 23:02:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 16 23:50:47 2013] XMMSAS src. selection expression = ellipse(21912.440750, 33629.657196, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 16 23:50:47 2013] Writing source region out to fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20_src.reg
[Fri Aug 16 23:50:47 2013] Extracting stamp from image fullrun_mos2_xmm0694440201_pi300-10000_cl_sm2.00.img.gz, (215, 350) - (290, 425)
[Fri Aug 16 23:50:47 2013] XMMSAS bgd. selection expression = annulus(21912.440750, 33629.657196, 1087.500000, 2175.000000, X, Y)
[Fri Aug 16 23:50:47 2013] Writing fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20.gif
[Fri Aug 16 23:52:54 2013] Mean detx,y = (-195.80, 6988.64) 
[Fri Aug 16 23:52:55 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 16 23:53:08 2013] Binned source spectrum to 10 counts/bin
[Fri Aug 16 23:53:08 2013] Setting source spectrum file to fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Aug 16 23:53:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Aug 17 00:00:26 2013] Not generating rmf since there are only 52 counts
[Sat Aug 17 00:00:26 2013] rmf not generated due to insufficient counts
[Sat Aug 17 00:02:31 2013] Updating aperture counts using extracted products
[Sat Aug 17 00:02:31 2013] Total counts from fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 107.00
[Sat Aug 17 00:02:31 2013] Total counts from fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 629.00
[Sat Aug 17 00:02:31 2013] Got source and background scale factors 840558.000000, 9645587.000000
[Sat Aug 17 00:02:31 2013] User source parameters:
  Position = (252.4, 387.1) = 15 59 36.10 27 32 56.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 52.2 +/- 11.4
  Background aperture counts = 54.8
  Rate = 0.002 +/- 0.0003

[Sat Aug 17 00:02:31 2013] Updating counts from extracted products
[Sat Aug 17 00:02:31 2013] Set source signif. to 52.19/7.40 = 7.05
[Sat Aug 17 00:02:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat Aug 17 00:02:34 2013] Using photon index=1.80, rate=0.00151, arf fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20.arf
[Sat Aug 17 00:02:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 17 00:02:34 2013] Updating source flux to 2.7e-14
[Sat Aug 17 00:02:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 17 00:02:38 2013] xmm0694440201/analysis//spectral/fullrun_mos2_xmm0694440201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete