[Sun Jul 14 21:09:39 2013] Detection parameters:
  Position = (276.4, 127.4) = 11 20 9.20 6 27 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.5 +/- 21.1
  Background counts = 120.2
  Rate = 0.001 +/- 0.0002

[Sun Jul 14 21:09:40 2013] Off-axis axis estimate = 12.50'
[Sun Jul 14 21:13:21 2013] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 21:13:21 2013] Initial guess for spatial extent in simple fitting = 12.68"
[Sun Jul 14 21:13:21 2013] source mask rpix=2.9, npix_max = 46, mask sum = 31, frac = 0.665
[Sun Jul 14 21:13:21 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 12.68"
[Sun Jul 14 21:53:15 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jul 14 21:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src6.csv
[Sun Jul 14 21:53:15 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jul 14 21:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src6.csv
[Sun Jul 14 21:53:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul 14 21:53:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 22:15:41 2013] Warning, spatial fit 6 centroid is now closest to src. 11
[Sun Jul 14 22:15:41 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 22:15:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 22:15:41 2013] Assessing source extent using major
[Sun Jul 14 22:15:41 2013] Source does appear to be extended
[Sun Jul 14 22:15:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 22:15:51 2013] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 22:15:51 2013] Initial guess for spatial extent in simple fitting = 12.68"
[Sun Jul 14 22:15:51 2013] source mask rpix=2.9, npix_max = 46, mask sum = 31, frac = 0.665
[Sun Jul 14 22:15:51 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 12.68"
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src6.csv
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src6.csv
[Sun Jul 14 22:51:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jul 14 22:51:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 23:14:40 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.577950 pixels away
[Sun Jul 14 23:14:40 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 23:14:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 23:14:40 2013] Assessing source extent using major
[Sun Jul 14 23:14:40 2013] Source does appear to be extended
[Sun Jul 14 23:14:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 23:14:50 2013] XMMSAS src. selection expression = ellipse(23996.260406, 11038.200752, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 23:14:50 2013] Writing source region out to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7_src.reg
[Sun Jul 14 23:14:50 2013] Extracting stamp from image fullrun_pn_xmm0693990101_pi300-10000_cl_sm2.00.img.gz, (239, 90) - (314, 165)
[Sun Jul 14 23:14:50 2013] XMMSAS bgd. selection expression = annulus(23996.260406, 11038.200752, 1087.500000, 2175.000000, X, Y) && !ellipse(22681.894800, 11905.959400, 902.600026, 387.565611, 35.605500, X, Y) && !ellipse(21056.349121, 10561.207481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22747.438171, 10991.943504, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 23:14:50 2013] Writing fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7.gif
[Sun Jul 14 23:19:45 2013] Mean detx,y = (-8846.58, 14090.44) 
[Sun Jul 14 23:19:48 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 23:20:01 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 23:20:01 2013] Setting source spectrum file to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jul 14 23:20:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jul 14 23:42:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 14 23:42:38 2013] rmf not generated due to insufficient counts
[Mon Jul 15 00:48:35 2013] Updating aperture counts using extracted products
[Mon Jul 15 00:48:35 2013] Total counts from fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 314.00
[Mon Jul 15 00:48:35 2013] Total counts from fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1016.00
[Mon Jul 15 00:48:35 2013] Got source and background scale factors 509197.000000, 1555665.000000
[Mon Jul 15 00:48:35 2013] User source parameters:
  Position = (276.4, 127.4) = 11 20 9.20 6 27 7.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -18.6 +/- 18.7
  Background aperture counts = 332.6
  Rate = -0.0004 +/- 0.0005

[Mon Jul 15 00:48:35 2013] Updating counts from extracted products
[Mon Jul 15 00:48:35 2013] Set source signif. to -18.55/18.24 = -1.02
[Mon Jul 15 00:48:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul 15 00:48:43 2013] Using photon index=1.80, rate=-0.000447, arf fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7.arf
[Mon Jul 15 00:48:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 15 00:48:43 2013] Updated flux is not positive, keeping original flux
[Mon Jul 15 00:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul 15 00:48:58 2013] xmm0693990101/analysis//spectral/fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete