[Sun Jul 14 21:09:40 2013] Detection parameters:
  Position = (293.6, 296.3) = 11 20 4.16 6 39 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.3 +/- 26.4
  Background counts = 219.0
  Rate = 0.003 +/- 0.0004

[Sun Jul 14 21:09:40 2013] Off-axis axis estimate = 0.38'
[Sun Jul 14 21:13:21 2013] Using EEF radius (= 6.62 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 21:13:21 2013] Initial guess for spatial extent in simple fitting = 6.62"
[Sun Jul 14 21:13:21 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Sun Jul 14 21:13:21 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 6.62"
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src37.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src37.csv
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src37.csv
[Sun Jul 14 21:53:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sun Jul 14 21:53:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 22:15:41 2013] Source 40 is offset by -5.882153 and -1.465331 pixels which is larger than
2 X fitted extent = 0.766253 x 0.766253, not incorporating fit results
[Sun Jul 14 22:15:41 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 22:15:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 22:15:41 2013] Assessing source extent using major
[Sun Jul 14 22:15:41 2013] Source does appear to be extended
[Sun Jul 14 22:15:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 22:15:51 2013] Using EEF radius (= 6.62 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 22:15:51 2013] Initial guess for spatial extent in simple fitting = 6.62"
[Sun Jul 14 22:15:51 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Sun Jul 14 22:15:51 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 6.62"
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src35.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src35.csv
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src35.csv
[Sun Jul 14 22:51:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 22:51:37 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Jul 14 22:51:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jul 14 22:51:37 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Jul 14 22:51:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jul 14 22:51:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 23:14:40 2013] Source 40 is offset by -5.882153 and -1.465312 pixels which is larger than
2 X fitted extent = 0.766257 x 0.766257, not incorporating fit results
[Sun Jul 14 23:14:40 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 23:14:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 23:14:40 2013] Assessing source extent using major
[Sun Jul 14 23:14:40 2013] Source does appear to be extended
[Sun Jul 14 23:14:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 23:14:51 2013] XMMSAS src. selection expression = ellipse(25498.324646, 25731.157440, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 23:14:51 2013] Writing source region out to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40_src.reg
[Sun Jul 14 23:14:51 2013] Extracting stamp from image fullrun_pn_xmm0693990101_pi300-10000_cl_sm2.00.img.gz, (256, 259) - (331, 334)
[Sun Jul 14 23:14:51 2013] XMMSAS bgd. selection expression = annulus(25498.324646, 25731.157440, 1087.500000, 2175.000000, X, Y) && !ellipse(23933.089294, 24190.966980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28482.813873, 28313.561066, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 23:14:51 2013] Writing fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40.gif
[Sun Jul 14 23:34:50 2013] Mean detx,y = (-1480.60, 1475.10) 
[Sun Jul 14 23:34:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 23:35:07 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 23:35:07 2013] Setting source spectrum file to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Jul 14 23:35:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Jul 15 00:00:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 15 00:00:20 2013] rmf not generated due to insufficient counts
[Mon Jul 15 00:48:41 2013] Updating aperture counts using extracted products
[Mon Jul 15 00:48:41 2013] Total counts from fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 585.00
[Mon Jul 15 00:48:41 2013] Total counts from fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 3548.00
[Mon Jul 15 00:48:41 2013] Got source and background scale factors 1280788.000000, 9415158.000000
[Mon Jul 15 00:48:41 2013] User source parameters:
  Position = (293.6, 296.3) = 11 20 4.16 6 39 33.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 102.3 +/- 25.2
  Background aperture counts = 482.7
  Rate = 0.002 +/- 0.0006

[Mon Jul 15 00:48:41 2013] Updating counts from extracted products
[Mon Jul 15 00:48:41 2013] Set source signif. to 102.35/21.97 = 4.66
[Mon Jul 15 00:48:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul 15 00:48:43 2013] Using photon index=1.80, rate=0.00247, arf fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40.arf
[Mon Jul 15 00:48:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 15 00:48:43 2013] Updating source flux to 8.1e-15
[Mon Jul 15 00:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul 15 00:48:58 2013] xmm0693990101/analysis//spectral/fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete