[Sun Jul 14 21:09:39 2013] Detection parameters:
  Position = (256.7, 215.1) = 11 20 14.95 6 33 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2201.0 +/- 57.6
  Background counts = 205.3
  Rate = 0.02 +/- 0.0006

[Sun Jul 14 21:09:40 2013] Off-axis axis estimate = 6.76'
[Sun Jul 14 21:13:21 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 21:13:21 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Sun Jul 14 21:13:21 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.560
[Sun Jul 14 21:13:21 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.81"
[Sun Jul 14 21:53:15 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 14 21:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 14 21:53:15 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 14 21:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 14 21:53:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 14 21:53:16 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 14 21:53:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 14 21:53:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 22:15:41 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.648615 pixels away
[Sun Jul 14 22:15:41 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 22:15:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 22:15:41 2013] Assessing source extent using major
[Sun Jul 14 22:15:41 2013] Source does appear to be extended
[Sun Jul 14 22:15:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 22:15:51 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 22:15:51 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Sun Jul 14 22:15:51 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.560
[Sun Jul 14 22:15:51 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.81"
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 14 22:51:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 14 22:51:36 2013] fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 14 22:51:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 14 22:51:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693990101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 23:14:40 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.865845 pixels away
[Sun Jul 14 23:14:40 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 23:14:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 23:14:40 2013] Assessing source extent using major
[Sun Jul 14 23:14:40 2013] Source does appear to be extended
[Sun Jul 14 23:14:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 23:14:50 2013] Counts = 2201.031250, rescaling region sizes by 2.000000
[Sun Jul 14 23:14:50 2013] XMMSAS src. selection expression = ellipse(22282.375275, 18665.662506, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 14 23:14:50 2013] Writing source region out to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 14 23:14:50 2013] Extracting stamp from image fullrun_pn_xmm0693990101_pi300-10000_cl_sm2.00.img.gz, (182, 140) - (332, 290)
[Sun Jul 14 23:14:50 2013] XMMSAS bgd. selection expression = annulus(22282.375275, 18665.662506, 4350.000000, 8700.000000, X, Y) && !ellipse(13705.496948, 25351.352844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14791.431808, 27478.809235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21524.512920, 22624.409400, 451.156013, 388.412811, 74.185697, X, Y) && !ellipse(23996.260406, 11038.200752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28737.132460, 27732.359200, 377.788811, 377.788811, 0.000000, X, Y) && !ellipse(22681.894800, 11905.959400, 902.600026, 387.565611, 35.605500, X, Y) && !ellipse(21056.349121, 10561.207481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22747.438171, 10991.943504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.089294, 24190.966980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15864.677340, 22708.556200, 665.167219, 283.106408, 52.755789, X, Y) && !ellipse(26831.011292, 22249.840546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.598200, 19157.804400, 539.684816, 342.909610, 246.066000, X, Y) && !ellipse(25498.324646, 25731.157440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29002.482740, 24743.926400, 404.530412, 404.530412, 0.000000, X, Y) && !ellipse(30799.786400, 20375.045000, 431.064812, 208.884806, 345.034100, X, Y) && !ellipse(31650.635529, 19494.411316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24682.545654, 18829.804382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20031.583481, 11060.933113, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 23:14:50 2013] Writing fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1.gif
[Sun Jul 14 23:15:09 2013] Mean detx,y = (-7263.76, 6625.81) 
[Sun Jul 14 23:15:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 23:16:48 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 23:16:49 2013] Setting source spectrum file to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 14 23:16:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 14 23:37:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 14 23:37:59 2013] rmf not generated due to insufficient counts
[Mon Jul 15 00:48:34 2013] Updating aperture counts using extracted products
[Mon Jul 15 00:48:34 2013] Total counts from fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 3277.00
[Mon Jul 15 00:48:34 2013] Total counts from fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 51593.00
[Mon Jul 15 00:48:34 2013] Got source and background scale factors 4884917.000000, 142849038.000000
[Mon Jul 15 00:48:34 2013] User source parameters:
  Position = (256.7, 215.1) = 11 20 14.95 6 33 39.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1512.7 +/- 58.3
  Background aperture counts = 1764.3
  Rate = 0.04 +/- 0.001

[Mon Jul 15 00:48:34 2013] Updating counts from extracted products
[Mon Jul 15 00:48:34 2013] Set source signif. to 1512.71/42.00 = 36.01
[Mon Jul 15 00:48:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul 15 00:48:43 2013] Using photon index=1.80, rate=0.0365, arf fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 15 00:48:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 15 00:48:43 2013] Updating source flux to 1.8e-13
[Mon Jul 15 00:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul 15 00:48:58 2013] xmm0693990101/analysis//spectral/fullrun_pn_xmm0693990101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete