[Mon Aug 26 07:19:11 2013] Detection parameters:
  Position = (383.5, 244.8) = 2 28 51.71 31 35 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 11.8
  Background counts = 37.1
  Rate = 0.002 +/- 0.0003

[Mon Aug 26 07:19:11 2013] Off-axis axis estimate = 7.29'
[Mon Aug 26 07:21:15 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon Aug 26 07:21:15 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Mon Aug 26 07:21:15 2013] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.725
[Mon Aug 26 07:21:15 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 10.07"
[Mon Aug 26 08:33:06 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src46.ximg exists
[Mon Aug 26 08:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src46.csv
[Mon Aug 26 08:33:06 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src46_1.ximg exists
[Mon Aug 26 08:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src46.csv
[Mon Aug 26 08:33:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 08:33:06 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Mon Aug 26 08:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src46.csv
[Mon Aug 26 08:33:06 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Mon Aug 26 08:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src46.csv
[Mon Aug 26 08:33:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 09:23:58 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 12.635718 pixels away
[Mon Aug 26 09:23:58 2013] Vigneting correction estimate = 1.000000
[Mon Aug 26 09:23:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 26 09:23:58 2013] Assessing source extent using major
[Mon Aug 26 09:23:58 2013] Source does appear to be extended
[Mon Aug 26 09:23:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 26 09:24:16 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon Aug 26 09:24:16 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Mon Aug 26 09:24:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.725
[Mon Aug 26 09:24:16 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 10.07"
[Mon Aug 26 10:39:03 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src46.ximg exists
[Mon Aug 26 10:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src46.csv
[Mon Aug 26 10:39:03 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon Aug 26 10:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src46.csv
[Mon Aug 26 10:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 10:39:04 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon Aug 26 10:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Aug 26 10:39:04 2013] fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Aug 26 10:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Mon Aug 26 10:39:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0693970301_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 26 11:23:47 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 12.635718 pixels away
[Mon Aug 26 11:23:47 2013] Spatial fit model total counts = 2089.990000, observed total counts = 1992.000000
[Mon Aug 26 11:23:47 2013] Offset between fit and detection position for source 50 = 4.328481 pixels
[Mon Aug 26 11:23:47 2013] Warning, changing simple spatial fit ID from 46 to 49
[Mon Aug 26 11:23:47 2013] 1905.365000 total counts/ 1388.050000 bgd. counts: snr = 13.885212
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 4.328481 pixels
  Position = (382.7, 240.6) = 2 28 51.98 31 35 16.8
  Extent = 41.4 (41.3-82.7)", rotation angle = 0
  Source counts = 517.3 +/- 43.7
  Background counts = 1388.0
  Rate = 0.01 +/- 0.001
[Mon Aug 26 11:23:47 2013] Vigneting correction estimate = 1.000000
[Mon Aug 26 11:23:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 26 11:23:47 2013] Assessing source extent using major axis lower bound
[Mon Aug 26 11:23:47 2013] Source does appear to be extended
[Mon Aug 26 11:23:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 26 11:23:47 2013] Source is confused with source 47
[Mon Aug 26 11:24:04 2013] XMMSAS src. selection expression = ellipse(33245.820000, 20879.382000, 2482.020071, 2482.020071, 0.000000, X, Y)
[Mon Aug 26 11:24:04 2013] Writing source region out to fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50_src.reg
[Mon Aug 26 11:24:04 2013] Extracting stamp from image fullrun_pn_xmm0693970301_pi300-10000_cl_sm2.00.img.gz, (240, 98) - (525, 383)
[Mon Aug 26 11:24:04 2013] XMMSAS bgd. selection expression = annulus(33245.820000, 20879.382000, 4136.700119, 8273.400238, X, Y) && !ellipse(38781.568000, 19915.002000, 918.480026, 400.925612, 122.497500, X, Y) && !ellipse(38207.904755, 18984.471786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31571.717438, 18231.157669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30488.091125, 20578.231445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28568.842133, 16299.657043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24499.738922, 12486.101730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.933929, 28928.964996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40315.030400, 25009.640320, 2504.872072, 496.075214, 105.307300, X, Y) && !ellipse(41994.534200, 30178.365800, 2417.552070, 302.194409, 107.010200, X, Y) && !ellipse(38671.920000, 20769.130000, 1767.672051, 1767.672051, 0.000000, X, Y) && !ellipse(28831.846680, 28339.107758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.923540, 28326.192200, 399.053611, 399.053611, 0.000000, X, Y) && !ellipse(41395.097504, 28309.002380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40972.512421, 26814.005829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40593.443000, 25802.884000, 2018.656058, 395.901611, 111.580600, X, Y) && !ellipse(40275.997200, 24935.798000, 1985.712057, 518.321615, 102.016600, X, Y) && !ellipse(30543.594513, 23411.450378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39835.072600, 23123.152000, 1971.896057, 910.368026, 317.862000, X, Y) && !ellipse(32201.694824, 22153.773621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39700.156006, 21605.553879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32402.960000, 19371.480000, 1654.680048, 1654.680048, 0.000000, X, Y) && !ellipse(33104.676400, 18540.525800, 373.473611, 373.473611, 0.000000, X, Y) && !ellipse(30895.638123, 18379.551239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29644.192719, 17612.335388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31990.460400, 15387.886200, 571.304016, 290.711208, 310.378801, X, Y) && !ellipse(26544.273438, 12975.203262, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 26 11:24:04 2013] Writing fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50.gif
[Mon Aug 26 11:51:53 2013] Mean detx,y = (-9618.70, -1213.59) 
[Mon Aug 26 11:51:59 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 26 11:53:21 2013] Binned source spectrum to 10 counts/bin
[Mon Aug 26 11:53:22 2013] Setting source spectrum file to fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Aug 26 11:53:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Aug 26 13:13:40 2013] Updating aperture counts using extracted products
[Mon Aug 26 13:13:40 2013] Total counts from fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 3487.00
[Mon Aug 26 13:13:40 2013] Total counts from fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50_bgd.pi.gz = 23476.00
[Mon Aug 26 13:13:40 2013] Got source and background scale factors 16706380.000000, 123736632.000000
[Mon Aug 26 13:13:40 2013] User source parameters:
  Position = (382.7, 240.6) = 2 28 51.98 31 35 16.8
  Extent = 41.4 (41.3-82.7)", rotation angle = 0
  Source aperture counts = 317.4 +/- 60.1
  Background aperture counts = 3169.6
  Rate = 0.008 +/- 0.001

[Mon Aug 26 13:13:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon Aug 26 13:13:43 2013] Using photon index=1.80, rate=0.0126, arf fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50.arf
[Mon Aug 26 13:13:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 26 13:13:43 2013] Updating source flux to 3.7e-13
[Mon Aug 26 13:13:55 2013] Flag c found in src. 50 procflags, skipping spectral fitting
[Mon Aug 26 13:14:00 2013] xmm0693970301/analysis//spectral/fullrun_pn_xmm0693970301_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete